BS-EN-13473-1-2001.pdf
《BS-EN-13473-1-2001.pdf》由会员分享,可在线阅读,更多相关《BS-EN-13473-1-2001.pdf(12页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 13473-1:2001 Reinforcement Specifications for multi-axial multi-ply fabrics Part 1: Designation The European Standard 13473-1:2001 has the status of a British Standard ICS 59.100.99; 83.120 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW BS EN 13473-1:20
2、01 This British Standard, having been prepared under the direction of the Sector Committee for Materials and Chemicals, was published under the authority of the Standards Committee and comes into effect on 15 August 2001 BSI 07-2001 ISBN 0 580 37760 1 National foreword This British Standard is the o
3、fficial English language version of EN 13473-1:2001. The UK participation in its preparation was entrusted to Technical Committee PRI/42, Fibre reinforced thermosetting plastics and prepregs, which has the responsibility to: A list of organizations represented on this committee can be obtained on re
4、quest to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of
5、 the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations.
6、aid enquirers to understand the text; present to the responsible European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document
7、comprises a front cover, an inside front cover, the EN title page, pages 2 to 9 and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. DateComments EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM
8、 EN 13473-1 June 2001 ICS 59.100.99; 83.120 English version Reinforcement Specifications for multi-axial multi-ply fabrics Part 1: Designation Renfort Spcifications pour les tissus multi-axiaux multicouches Partie 1: Dsignation Verstrkungen Spezifikation fr Multiaxialgelege Teil 1: Bezeichnung This
9、European Standard was approved by CEN on 10 May 2001. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references c
10、oncerning such national standards may be obtained on application to the Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its ow
11、n language and notified to the Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Swed
12、en, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2001 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members.
13、 Ref. No. EN 13473-1:2001 E Page 2 EN 13473-1:2001 BSI 07-2001 Contents Page Foreword 3 1Scope 4 2Normative references 4 3Terms and definitions 4 4Designation. 6 4.1General . 6 4.2Data-Block 1 7 4.3Data-Block 2 7 4.4Data-Block 3 8 5Coding examples 8 5.1Example 1. 8 5.2Example 2. 8 5.3Example 3. 9 Pa
14、ge 3 EN 13473-1:2001 BSI 07-2001 Foreword This European Standard has been prepared by Technical Committee CEN/TC 249, Plastics, the Secretariat of which is held by IBN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorseme
15、nt, at the latest by December 2001, and conflicting national standards shall be withdrawn at the latest by December 2001. This standard is one part of EN 13473, Reinforcement Specification for multi-axial multi-ply fabrics, which is constructed as follows: ? Part 1: Designation; ? Part 2: Methods of
16、 test and general requirements; ? Part 3: Specific requirements. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Gree
17、ce, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. Page 4 EN 13473-1:2001 BSI 07-2001 1 Scope This part 1 of EN 13473 establishes a method of designation for multi-axial multi-ply fabrics that shall be used for specifications fo
18、r the reinforcement of materials. The method of designation defines the structure of the multi-axial multi-ply construction and the binding system. This designation system applies to multi-axial multi-ply fabrics made of reinforcement yarns, tows, rovings, fibre fleeces, films, foams or other materi
19、als which are intended to provide reinforcement in composite materials and which is bound to a multi-ply construction. The designation of a multi-axial multi-ply fabric is structured in a product of multi-axial multi-ply fabrics. It is not intended that this hierarchy takes into account all the attr
20、ibutes of individual multi-axial multi-ply fabrics. Therefore multi-axial multi-ply fabrics having the same designation do not necessarily give the same performance. This part 1 of EN 13473 does not give engineering data, performance data or data that may be required to specify multi-axial multi-ply
21、 fabrics for a particular application or method of processing. If such additional properties are required they have to be determined in accordance with the test methods specified in EN 13473-2. 2 Normative references This European Standard incorporates by dated or undated reference, provisions from
22、other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment
23、 or revision. For undated references the latest edition of the publication referred to applies (including amendments). EN 13473-2, Reinforcement Specifications for multi-axial multi-ply fabrics Part 2: Methods of test and general requirements. ISO/DIS 1268-1:1997, Fibre-reinforced plastics Methods o
24、f producing test plates Part 1: General conditions. ISO 472, Plastics Vocabulary. ISO 1043-2, Plastics Symbols Part 2: Fillers and reinforcing materials. ISO 4921, Knitting Basic concepts Vocabulary. 3 Terms and definitions For the purposes of this European Standard, the terms and definitions given
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 13473 2001
链接地址:https://www.31doc.com/p-3740988.html