BS-EN-2064-1992.pdf
《BS-EN-2064-1992.pdf》由会员分享,可在线阅读,更多相关《BS-EN-2064-1992.pdf(20页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 2064:1992 Bearings, spherical plain in corrosion resisting steel with self lubricating liner Technical specification The European Standard EN 2064:1992 has the status of a British Standard BS EN 2064:1992 This British Standard, having been prepared under the direction of the A
2、erospace Standards Policy Committee, was published under the authority of the Standards Board and comes into effect on 15 August 1992 BSI 01-2000 The following BSI references relate to the work on this standard: Committee reference ACE/14 Draft for comment 91/71314 DC ISBN 0 580 21027 8 Cooperating
3、organizations The European Committee for Standardization (CEN), under whose supervision this European Standard was prepared, comprises the national standards organizations of the following countries: AustriaOesterreichisches Normungsinstitut BelgiumInstitut belge de normalisation DenmarkDansk Standa
4、rdiseringsraad FinlandSuomen Standardisoimisliito, r.y. FranceAssociation franaise de normalisation GermanyDeutsches Institut fr Normung e.V. GreeceHellenic Organization for Standardization IcelandTechnological Institute of Iceland IrelandNational Standards Authority of Ireland ItalyEnte Nazionale I
5、taliano di Unificazione LuxembourgInspection du Travail et des Mines NetherlandsNederlands Normalisatie-instituut NorwayNorges Standardiseringsforbund PortugalInstituto Portugus da Qualidade SpainAsociacin Espaola de Normalizacin y Certificacin SwedenStandardiseringskommissionen i Sverige Switzerlan
6、dAssociation suisse de normalisation United KingdomBritish Standards Institution Amendments issued since publication Amd. No.DateComments BS EN 2064:1992 BSI 01-2000i Contents Page Cooperating organizationsInside front cover National forewordii Foreword2 Text of EN 20643 National annex NA (informati
7、ve) Committees responsibleInside back cover National annex NB (informative) Cross-referencesInside back cover BS EN 2064:1992 ii BSI 01-2000 National foreword This British Standard has been prepared under the direction of the Aerospace Standards Policy Committee and is the English language version o
8、f EN 2064:1992, Aerospace series Bearings spherical plain in corrosion resisting steel with self lubricating liner Technical specification, published by the European Committee for Standardization (CEN). EN 2064 was produced as a result of international discussions in which the United Kingdom took an
9、 active part. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This docum
10、ent comprises a front cover, an inside front cover, pages i and ii, the EN title page, pages 2 to 14, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front
11、 cover. EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 2064 May 1992 UDC 629.7.02:621.822.74 + 84:658.56 Descriptors: Aircraft industry, ball joints, corrosion resistant steels, linings, selflubrication parts, specifications, characteristics, inspection, tests English version Aerospace series
12、Bearings spherical plain in corrosion resisting steel with self lubricating liner Technical specification Srie arospatiale Rotules en acier rsistant la corrosion garniture autolubrifiante Spcification technique Luft- und Raumfahrt Gelenklager aus nictrostendem Stahl mit selbstschmierender Beschictun
13、g Technische Spezifikation This European Standard was approved by CEN on 1992-05-11. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists a
14、nd bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsib
15、ility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Po
16、rtugal, Spain, Sweden, Switzerland and United Kingdom. CEN European Committee for Standardization Comit Europen de Normalisation Europisches Komitee fr Normung Central Secretariat: rue de Stassart 36, B-1050 Brussels 1992 Copyright reserved to CEN members Ref. No. EN 2064:1992 E EN 2064:1992 BSI 01-
17、2000 2 Foreword This European Standard has been prepared by the European Association of Aerospace Manufacturers (AECMA). After inquiries and votes carried out in accordance with the rules of this Association, this Standard has successively received the approval of the National Associations and the O
18、fficial Services of the member countries of AECMA, prior to its presentation to CEN. According to the Common CEN/CENELEC Rules, the following countries are bound to implement this European Standard: Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Net
19、herlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. Contents Page Foreword2 1Scope3 2Field of application3 3Normative references3 4Definitions and symbols3 5Materials3 6Required characteristics4 7Inspections and tests6 8Qualification conditions6 9Acceptance conditions10 10Mark
20、ing, packing and certificate of conformity11 Annex A (normative) Fluids Main characteristics12 Annex B (normative) Table of inspections and tests to be performed in respect of qualification of bearings with self lubricated liners defined in Standard EN 2022 and EN 202313 Annex C (normative) Table of
21、 tests and inspections to be performed in respect of the qualification of individual bearings with self lubricating liners14 Figure 17 Figure 28 Figure 39 Figure 410 Table 14 Table 25 Table 35 EN 2064:1992 BSI 01-20003 1 Scope This standard specifies the required characteristics, inspections and tes
22、ts, qualification, acceptance and delivery conditions for bearings with self lubricating liners, designed to be subjected under load to slow rotations and oscillations only. 2 Field of application These bearings are intended to be used between fixed and moving components of the aircraft structure, s
23、uch as control surfaces, flaps, doors etc. and their control mechanisms. They are designed to be used in the temperature range of 55 C to + 150 C. The requirements of this standard may also be applied to other bearings, not listed in clause 3, provided that they are conditions of procurement of such
24、 bearings. 3 Normative references EN 2022, Aerospace series Bearings, spherical plain, in corrosion resisting steel with self lubricating liner Light series Dimensions and loads. EN 2023, Aerospace series Bearings, spherical plain, in corrosion resisting steel with self lubricating liner Normal seri
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 2064 1992
链接地址:https://www.31doc.com/p-3741060.html