《BS-EN-15287-1-2007.pdf》由会员分享,可在线阅读,更多相关《BS-EN-15287-1-2007.pdf(118页珍藏版)》请在三一文库上搜索。
1、BS EN 15287-1:2007 ICS 91.060.40 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW BRITISH STANDARD Chimneys Design, installation and commissioning of chimneys Part 1: Chimneys for non-roomsealed heating appliances Incorporating corrigendum November 2008 Licensed Copy: London So
2、uth Bank University, South Bank University, 31/01/2009 04:19, Uncontrolled Copy, (c) BSI National foreword This British Standard is the UK implementation of EN 15287-1:2007. It supersedes BS 6461-1:198BS EN 12391-1:2003 BS 7566:1992 which are withdrawn. This British Standard can be considered comple
3、mentary to BS 5440- 1:2008. The UK participation in its preparation was entrusted to Technical Committee B/506, Chimneys. National Annexes NA to NE (informative) identify the provisions currently required to meet the UK devolved administrations Building Regulations for chimneys (see Annex NE, Clause
4、 NE.2, for details) and encompass recommendations drawn from the requirements of BS 6461-1:1984 and BS 7566 (all parts). Annexes NA to ND inclusive detail recommendations for the installation of chimneys and fl ues for domestic appliances burning solid fuel (including wood and peat). Annex NE provid
5、es information relevant for chimneys to be used with gas and oil appliances. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its corre
6、ct application. Compliance with a British Standard cannot confer immunity from legal obligations. Amendments/corrigenda issued since publication DateComments and addition of National Annexes NA to NE This British Standard was published under the authority of the Standards Policy and Strategy Committ
7、ee on 30 September 2008 #BSI 2008 ISBN 978 0 580 62530 0 BS EN 15287-1:2007 30 November 2008Correction to National Foreword, 4, and all parts of Licensed Copy: London South Bank University, South Bank University, 31/01/2009 04:19, Uncontrolled Copy, (c) BSI BS EN 15287-1:2007 EUROPEAN STANDARD NORME
8、 EUROPENNE EUROPISCHE NORM EN 15287-1 September 2007 ICS 91.060.40Supersedes EN 12391-1:2003 English Version Chimneys - Design, installation and commissioning of chimneys - Part 1: Chimneys for non-roomsealed heating appliances Conduits de fume - Conception et mise en vre des conduits de fume - Part
9、ie 1: Conduits de fume pour appareils qui dpendent de lair dans la pice Abgasanlagen - Planung, Montage und Abnahme von Abgasanlagen - Teil 1: Abgasanlagen fr raumluftabhngige Feuersttten This European Standard was approved by CEN on 28 July 2007. CEN members are bound to comply with the CEN/CENELEC
10、 Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CE
11、N member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN
12、 members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Swe
13、den, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2007 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members
14、. Ref. No. EN 15287-1:2007: E Licensed Copy: London South Bank University, South Bank University, 31/01/2009 04:19, Uncontrolled Copy, (c) BSI BS EN 15287-1:2007 EN 15287-1:2007 (E) 2 Contents Page Foreword3 Introduction.4 1 Scope 5 2 Normative references5 3 Terms and definitions .6 4 Design.11 5 In
15、stallation25 6 Commissioning/handover.26 Annex A (informative) Determination of the chimney designation for custom-built and relined chimneys 27 Annex B (informative) List of heating appliance data required for the design of a chimney39 Annex C (informative) Example of a chimney designation.40 Annex
16、 D (informative) Correlation between designation parameters for clay/ceramic flue liners and clay/ceramic flue blocks and concrete flue liners and concrete flue blocks.41 Annex E (informative) Designation of metal system chimneys and correlation between metal liner material specification and corrosi
17、on load in Member States (MS)43 Annex F (informative) Example of typical building structure designed to assist exchange of information.49 Annex G (informative) Examples of a chimney plate.52 Annex H (normative) Determination of a chimney designation for an installed metal system chimney 53 Annex I (
18、informative) Example for the determination of the designation of a relined chimney using a metal flue liner54 Annex J (informative) Example for the determination of the designation of a custom-built chimney using a clay/ceramic flue liner60 Annex K (normative) Determination of the designation for an
19、 installed metal connecting flue pipe.65 Annex L (informative) Recommendations for inspection, cleaning and maintenance 66 Annex M (informative) Location of the chimney outlet67 Annex N (informative) Calculating the temperature of adjacent material71 Annex O (informative) Chimney commissioning .74 A
20、nnex P (informative) Useful hints for checking, handling and site storage of materials and components77 Bibliography79 Licensed Copy: London South Bank University, South Bank University, 31/01/2009 04:19, Uncontrolled Copy, (c) BSI BS EN 15287-1:2007 EN 15287-1:2007 (E) 3 Foreword This document (EN
21、15287-1:2007) has been prepared by Technical Committee CEN/TC 166 “Chimneys”, the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2008, and conflicting n
22、ational standards shall be withdrawn at the latest by March 2008. This document supersedes EN 12391-1:2003. This document is one of a series of specifications as listed below: Chimneys Design, installation and commissioning of chimneys Part 1: Chimneys for non-roomsealed heating appliances. Chimneys
23、 Design, installation and commissioning of chimneys Part 2: Chimneys for roomsealed heating appliances. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus
24、, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. Licensed Copy: London South Bank University
25、, South Bank University, 31/01/2009 04:19, Uncontrolled Copy, (c) BSI BS EN 15287-1:2007 EN 15287-1:2007 (E) 4 Introduction CEN/TC 166 started with its programme on standardization of chimneys approximately 15 years ago, with standards for interfaces, for products, for test and last but not least fo
26、r design, installation, construction and commissioning matters. For the work program in the last years first priority had been given to product and test standards. In the meantime most of the product and test standards are published or nearly ready to be published. In order to introduce the products
27、, which are tested and certified in accordance with the relevant European Standards, in an easy way on the markets of the different countries, some common rules for design, installation, and commissioning especially with reference to the designation of a chimney are helpful. Firstly CEN/TC 166/SC 2
28、started the work on execution standards for metal chimneys. The first standard had been already published as EN 12391-1 in 2003. In order not to repeat this work in all material oriented WGs and SCs, CEN/TC 166 decided in 2002 to give the task to WG 1 to develop a material independent design, instal
29、lation and commissioning standard. CEN/TC 166/WG 1 started the work in 2003 and decided first to write two documents, one for chimneys connected to non-roomsealed heating appliances and one for chimneys connected to room-sealed heating appliances. Working on the documents there where two strong posi
30、tions, one for a Technical Specification (TS) and one for a European Standard (EN). Following the proposal of CEN/TC 166/WG 1, CEN/TC 166 decided to launch a vote on the question which of the two positions should apply. The CEN/TC 166 members had been in favour of creating European Standards (EN). L
31、icensed Copy: London South Bank University, South Bank University, 31/01/2009 04:19, Uncontrolled Copy, (c) BSI BS EN 15287-1:2007 EN 15287-1:2007 (E) 5 1 Scope This European Standard describes the method of specifying the design, installation criteria for system chimneys, construction of custom bui
32、lt chimneys, and the relining of existing chimneys. It also gives information on commissioning of chimneys. This European Standard also deals with connecting flue pipes. This European Standard does not apply to freestanding chimneys covered by EN 13084-1. This European Standard excludes chimneys des
33、ignated H (high positive pressure chimneys) and chimneys for room-sealed heating appliances. For the purpose of this European Standard the term “installation“ includes construction. 2 Normative references The following referenced documents are indispensable for the application of this document. For
34、dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 1443:2003, Chimneys General requirements EN 1457, Chimneys Clay/ceramic flue liners Requirements and test methods EN 1806, Chimneys Clay/cera
35、mic flue blocks for single wall chimneys Requirements and test methods EN 1856-1, Chimneys Requirements for metal chimneys Part 1: System chimney products EN 1856-2, Chimneys Requirements for metal chimneys Part 2: Metal liners and connecting flue pipes EN 1857, Chimneys Components Concrete flue lin
36、ers EN 1858, Chimneys Components Concrete flue blocks EN 12446, Chimneys Components Concrete outer wall elements EN 13063-1, Chimneys System chimneys with clay/ceramic flue liners Part 1: Requirements and test methods for sootfire resistance EN 13063-2, Chimneys System chimneys with clay/ceramic flu
37、e liners Part 2: Requirements and test methods under wet conditions EN 13063-3, Chimneys System chimneys with clay/ceramic flue liners Part 3: Requirements and test methods for air flue system chimneys EN 13069, Chimneys Clay/ceramic outer walls for system chimneys Requirements and test methods EN 1
38、3084 (all parts), Free-standing chimneys EN 13384-1:2002, Chimneys Thermal and fluid dynamic calculation methods Part 1: Chimneys serving one appliance EN 13384-2, Chimneys Thermal and fluid dynamic calculation methods Part 2: Chimneys serving more than one heating appliance Licensed Copy: London So
39、uth Bank University, South Bank University, 31/01/2009 04:19, Uncontrolled Copy, (c) BSI BS EN 15287-1:2007 EN 15287-1:2007 (E) 6 EN 13502, Chimneys Requirements and test methods for clay/ceramic flue terminals EN 14297, Chimneys Freeze-thaw resistance test method for chimney products EN 14471, Chim
40、neys System chimneys with plastic flue liners Requirements and test methods EN 14989-1, Chimneys Requirements and test methods for metal chimneys and material independent air supply ducts for roomsealed heating applications Part 1: Vertical air/flue terminals for C6-type appliances 3 Terms and defin
41、itions For the purposes of this document, the terms and definitions given in EN 1443:2003 together with the following apply. NOTE Examples of chimney construction identifying individual component terminology and definitions are given in Figures 1, 2 and 3. 3.1 access component component installed in
42、 the chimney or in the connecting flue pipe to provide access to the flue for the purpose of inspection or cleaning 3.2 back ventilation ventilation in the space between flue liner and the outer wall of the chimney or an enclosure to evacuate the products of combustion which can escape from the flue
43、 liner in positive pressure multi-wall systems 3.3 centralising spacer component to centralise the liner 3.4 chimney adapter component which connects a chimney to a connecting flue pipe or an heating appliance 3.5 condensate drain component to facilitate the disposal of condensate 3.6 damper device
44、used to close or partially close the flue 3.7 draught regulator balanced hinged flap in a flue opening to allow airflow into the chimney to control draught at the boiler outlet 3.8 elbow chimney fitting which provides a change of direction of the flue 3.9 explosion relief device that protects the ch
45、imney against overpressure arising from deflagration or explosion in the flue 3.10 fire compartment part of the building being isolated to provide resistance to fire Licensed Copy: London South Bank University, South Bank University, 31/01/2009 04:19, Uncontrolled Copy, (c) BSI BS EN 15287-1:2007 EN
46、 15287-1:2007 (E) 7 3.11 fire stop component intended to provide resistance to fire spread between rooms or compartments 3.12 flashing component or site fabricated materials used for weatherproofing the penetration of the roof by the chimney 3.13 flexible liner tube having a single or multi-skin con
47、struction that is able to bend in any direction without permanent deformation 3.14 heating appliance adapter component which connects the connecting flue pipe or the chimney to a heating appliance 3.15 rain cap part of the chimney that protects against the entry of rain. This can be a part of a term
48、inal 3.16 rigid liner straight liner that cannot bend without permanent deformation 3.17 rain seal part of the chimney that stops the entry of rain into the insulation space 3.18 seal device that joins two elements in such a way as to prevent leakage 3.19 sealant material which, applied in an unform
49、ed state to a joint, seals it by adhering to appropriate surfaces within the joint 3.20 silencer component installed to provide noise attenuation 3.21 sleeve component which provides an aperture through a wall, ceiling or floor through which a chimney or a connecting flue pipe passes 3.22 test point component that provides access for flue gas sampling and measurement 3.23 T-piece chimney fitting which allows a heating appliance, connecting flue pipe or accessory to be connected to the chimney flue
链接地址:https://www.31doc.com/p-3741149.html