BS-EN-13240-2001.pdf
《BS-EN-13240-2001.pdf》由会员分享,可在线阅读,更多相关《BS-EN-13240-2001.pdf(80页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 13240:2001 Incorporating Amendment No. 1 and Corrigendum No. 1 Roomheaters fired by solid fuel Requirements and test methods The European Standard EN 13240:2001, with the incorporation of amendment A2:2004, has the status of a British Standard ICS 97.100.30 ? BS EN 13240:2001
2、This British Standard, having been prepared under the direction of the Engineering Sector Policy and Strategy Committee, was published under the authority of the Standards Policy and Strategy Committee and comes into effect on 5 September 2001 BSI 2006 ISBN 0 580 38176 5 National foreword This Briti
3、sh Standard is the official English language version of EN 13240:2001, including amendment A2:2004, and Corrigenda September 2003 and June 2006. NOTE CEN amendment A2:2004 incorporates both CEN amendment A1:2001 and CEN amendment A2:2001. CEN/TC 295 has agreed that the withdrawal date of conflicting
4、 national standards is the date of availability plus 18 months. Conflicting national standards will need either to be withdrawn or amended by 31 December 2002 and these are under consideration in Technical Committee RHE/28. The start and finish of text introduced or altered by CEN amendment is indic
5、ated in the text by tags !“. Tags indicating changes to CEN text carry the number of the CEN amendment. For example, text altered by CEN amendment A1 is indicated by !“. The UK participation in its preparation was entrusted to Technical Committee RHE/28, Domestic solid mineral fuel appliances, which
6、 has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the sectio
7、n entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Com
8、pliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep UK interests informed; monitor related i
9、nternational and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 76, an inside back cover and a back cover. The BSI copyright notice displayed in this document indicates when the documen
10、t was last issued. Amendments issued since publication Amd. No. DateComments 16048April 2006See national foreword 16549 Corrigendum No. 1 31 October 2006Replacement of formula (18) in A.6.2.7.1. Corrections to A.6.2.1.2 (4), A.6.2.9 and to EN foreword, amendment A2 EUROPEAN STANDARD NORME EUROPENNE
11、EUROPISCHE NORM EN 13240 June 2001 + A2 September 2004 ICS 97.100.30 English version Roomheaters fired by solid fuel Requirements and test methods Poles combustible solide Exigences et mthodes dessai Raumheizer fr feste Brennstoffe Anforderungen und Prfung This European Standard was approved by CEN
12、on 7 April 2001; amendment A2 was approved by CEN on 10 May 2004. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical
13、references concerning such national standards may be obtained on application to the Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member
14、 into its own language and notified to the Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuani
15、a, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2001 CEN All rig
16、hts of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13240:2001 E Page 2 EN 13240:2001 Contents page Foreword 3 1 Scope.4 2 Normative references.4 3 Terms and definitions6 4 Materials, design and construction12 5 Safety requirements.19 6 Performan
17、ce requirements.20 7 Appliance instructions.23 8 Marking.25 9 Evaluation of conformity.25 Annex A (normative) Test methods .31 Annex B (normative) Test fuels and recommended fuels64 Annex ZA (informative) Clauses of this European Standard addressing the provisions of the EU Construction Products Dir
18、ective.71 Bibliography.76 Tables Table 1 Categorisation of appliances.4 Table 2 Steel Nominal minimum wall thicknesses.13 Table 3 Steel material types 14 Table 4 Minimum mechanical requirements for cast irons.15 Table 5 Cast iron Minimum wall thicknesses 15 Table 6 Minimum thread size designation of
19、 flow and return tappings16 Table 7 Minimum depth of tapping or length of thread 16 Table 10 Minimum refuelling intervals.22 Table 11 Characteristics to take account of in deciding family of appliances 27 Table 12 Performance characteristics to take account of in deciding family of appliances28 Tabl
20、e A.1 Uncertainty of measurement.34 Table A.2 Minimum duration, and number of test periods .37 Table A.3 Notations and units used in calculations.47 Table B.1 Test fuel specifications .68 Table B.2 Typical commercial fuel specifications69 Table ZA.1 Relevant Clauses72 Table ZA.2 Systems of attestati
21、on of conformity.72 Table ZA.3 Assignment of evaluation of conformity tasks for Space heating in residential buldings with possible supply of hot water under system 373 Figures Figure 1 Flue draught values.21 Figure A.1 Example of installation of an appliance with vertical flue outlet in the test as
22、sembly52 Figure A.2 Example of installation of an appliance with horizontal flue outlet in the test assembly .53 Figure A.3 View of trihedron showing general arrangement of walls and test hearth54 Figure A.4 Detail of filler pieces for trihedron rear wall.55 Figure A.5 Cross section showing trihedro
23、n construction.56 Figure A.6 Plan view of trihedron hearth and walls showing position of measurement points57 Figure A.7 Detail of thermocouples in trihedron wall.58 Figure A.8 Construction and general arrangement of measurement section.59 Figure A.9 Details and dimensions of measurement section for
24、 vertical flue outlet.60 Figure A.10 Details and dimensions of measurement section for horizontal flue outlet.61 Figure A.11 Example of test installation for appliances with water circuit 62 Figure A.12 Dimensions of measurement section for natural draught safety test63 Figure A.13 Example of instal
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 13240 2001
链接地址:https://www.31doc.com/p-3741159.html