BS-EN-13307-1-2006.pdf
《BS-EN-13307-1-2006.pdf》由会员分享,可在线阅读,更多相关《BS-EN-13307-1-2006.pdf(16页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 13307-1:2006 Timber blanks and semi-finished profiles for non-structural uses Part 1: Requirements The European Standard EN 13307-1:2006 has the status of a British Standard ICS 79.080 ? Licensed Copy: London South Bank University, London South Bank University, Sun Dec 24 04:5
2、6:28 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 13307-1:2006 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 November 2006 BSI 2006 ISBN 0 580 49753 4 National foreword This British Standard was published by BSI. It is the UK impleme
3、ntation of EN 13307-1:2006. The UK participation in its preparation was entrusted to Technical Committee B/543, Round and sawn timber. A list of organizations represented on B/543 can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions o
4、f a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. Amendments issued since publication Amd. No. DateComments Licensed Copy: London South Bank University, London South Bank University, Sun Dec 24 04:56:28
5、GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13307-1 November 2006 ICS 79.080 English Version Timber blanks and semi-finished profiles for non-structural uses - Part 1: Requirements Ebauches et profils semi-finis en bois pour usages non structurels
6、- Partie 1 : Exigences Holzkanteln und Halbfertigprofile fr nicht tragende Anwendungen - Teil 1: Anforderungen This European Standard was approved by CEN on 11 September 2006. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this Eur
7、opean Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (Englis
8、h, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czec
9、h Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EURO
10、PEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2006 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13307-1:2006: E Licensed Copy: London South Bank University, London Sout
11、h Bank University, Sun Dec 24 04:56:28 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 13307-1:2006 (E) 2 Contents Page Foreword3 Introduction.4 1 Scope 5 2 Normative references5 3 Terms and definitions .5 4 Requirements.6 4.1 Species .6 4.2 Dimensions, geometrical characteristics6 4.2.1 General6 4.2.
12、2 Cross-sectional dimensions.7 4.2.3 Tolerances on length.7 4.2.4 Warp7 4.3 Condition of surface8 4.4 Moisture content8 4.4.1 General8 4.4.2 Moisture content at delivery.8 4.5 Timber quality 8 4.5.1 General requirements8 4.5.2 Growth rings.8 4.6 End joints8 4.6.1 Finger joints .8 4.6.2 Butt joints.9
13、 4.7 Lamination9 4.7.1 Thickness of lamella9 4.7.2 Mixing of species.9 4.7.3 Glue line bonding.9 5 Marking and labelling9 Annex A (informative) Orientation of growth rings11 Bibliography12 Licensed Copy: London South Bank University, London South Bank University, Sun Dec 24 04:56:28 GMT+00:00 2006,
14、Uncontrolled Copy, (c) BSI EN 13307-1:2006 (E) 3 Foreword This document (EN 13307-1:2006) has been prepared by Technical Committee CEN/TC 175 “Round and sawn timber”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publica
15、tion of an identical text or by endorsement, at the latest by May 2007, and conflicting national standards shall be withdrawn at the latest by October 2007. This Standard is one of a package to be implemented by 2007.10.31. The Standards included in the Package are: Standard Number Title 1 prEN 942
16、Revised Timber in joinery - General requirements 2 EN 13307-1 Timber blanks and semi-finished profiles for non- structural uses Part 1: Requirements 3 EN 14220 Timber and wood-based materials in external windows, external door leaves and external doorframes Requirements and specifications 4 EN 14221
17、 Timber and wood-based materials in internal windows, internal door leaves and internal doorframes Requirements and specifications Explanation Standards 3 and 4 rely on both Standards 1 and 2, and Standard 2 relies on 1. The revised prEN 942 contains changes which directly affect Standards 2, 3 and
18、4 and therefore shall be available before they can be used effectively. NOTE Following the completion of the Technical Enquiry for prEN 13307-2 Timber blanks and semi-finished profiles for non-structural uses Part 2: Production control, it has been agreed to remove this Standard from the package. As
19、 a result of the necessary changes it has been agreed to offer prEN 13307-2 as a CEN/TS. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark
20、, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. Licensed Copy: London South Bank University, London South Bank Unive
21、rsity, Sun Dec 24 04:56:28 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 13307-1:2006 (E) 4 Introduction This European Standard relates to semi-finished products intended to be used in a wide range of joinery products, including windows, doors and stairs. It provides a basis for contracts between th
22、e sellers of these semi-finished products and manufacturers of the end products. The specifier should be aware that not all of the characteristics defined and/or classified by this standard may be relevant in any given application, especially if those characteristics are subsequently made good by th
23、e manufacturer of the end product. At the time of publication, no relevant test standard for delamination or for temperature stability of adhesives exists. Licensed Copy: London South Bank University, London South Bank University, Sun Dec 24 04:56:28 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 133
24、07-1:2006 (E) 5 1 Scope This European Standard specifies requirements for timber blanks and semi-finished profiles for non-structural uses, including glued laminated and glued finger jointed products. This Standard gives specific requirements for dimensions, stability and moisture content. This Stan
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 13307 2006
链接地址:https://www.31doc.com/p-3741189.html