《BS-EN-13430-2004.pdf》由会员分享,可在线阅读,更多相关《BS-EN-13430-2004.pdf(26页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 13430:2004 Packaging Requirements for packaging recoverable by material recycling The European Standard EN 13430:2004 has the status of a British Standard ICS 13.030.50; 55.020 ? BS EN 13430:2004 This British Standard was published under the authority of the Standards Policy a
2、nd Strategy Committee on 5 August 2004 BSI 5 August 2004 ISBN 0 580 44192 X National foreword This British Standard is the official English language version of EN 13430:2004. It supersedes BS EN 13430:2000 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committ
3、ee PKW/4, Packaging and the environment, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may
4、be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users ar
5、e responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and
6、 keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 22, an inside back cover and a back cover. The BSI copyright notice dis
7、played in this document indicates when the document was last issued. Amendments issued since publication Amd. No. DateComments EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13430 July 2004 ICS 13.030.50; 55.020Supersedes EN 13430:2000 English version Packaging - Requirements for packaging rec
8、overable by material recycling Emballage - Exigences relatives aux emballages valorisables par recyclage matire Verpackung - Anforderungen an Verpackungen fr die stoffliche Verwertung This European Standard was approved by CEN on 5 May 2004. CEN members are bound to comply with the CEN/CENELEC Inter
9、nal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member
10、. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members a
11、re the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United K
12、ingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2004 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13430:2004: E E
13、N 13430:2004 (E) 2 Contents Page Foreword3 Introduction.4 1 Scope 5 2 Normative References.5 3 Terms and definitions .5 4 Requirements.6 4.1 Application .6 4.2 Packaging assessment .6 4.3 Declaration of percentage recyclable6 4.4 Conformity of the packaging with this document (material recycling)7 4
14、.5 Support Documentation7 Annex A (normative) Procedures to elaborate the requirements for packaging recoverable by material recycling 8 A.1 Objective.8 A.2 Control of packaging construction/composition and processing8 A.3 Suitability for available recycling technology 8 A.4 Releases to the environm
15、ent caused by recycling of the packaging after use 8 Annex B (normative) Procedure for assessing recyclability criteria .10 B.1 Objective.10 B.2 Design Criteria .10 B.3 Production criteria.11 B.3.1 Raw material and material composition in production, conversion and filling 11 B.3.2 Control of change
16、s during processing .11 B.4 Utilisation criteria.11 B.4.1 Non-prejudice to essential requirements11 B.4.2 Criteria for emptying by the end user11 B.4.3 Criteria for sorting by the end-user .11 B.5 Criteria for collection/sorting .11 B.6 Note to annex B Material Identification .12 Annex C (informativ
17、e) Examples of compliance summary statement for packaging to be recovered by material recycling after use.13 Annex D (informative) Examples of declaration of the percentage of weight of material available for recycling .16 Annex ZA (Informative) Relationship between this European Standard and the Es
18、sential Requirements of EU Directive 94/62/EC21 Bibliography22 EN 13430:2004 (E) 3 Foreword This document (EN 13430:2004) has been prepared by Technical Committee CEN/TC 261 “Packaging”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standar
19、d, either by publication of an identical text or by endorsement, at the latest by January 2005, and conflicting national standards shall be withdrawn at the latest by January 2005. This document supersedes EN 13430:2000. This document has been prepared under a mandate given to CEN by the European Co
20、mmission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA , which is an integral part of this document. This document forms one of a series of standards and reports prepared under Mandate
21、M 200 rev3 and the second Standardisation Mandate M 317 given to CEN by the European Commission and the European Free Trade Association to support the European Council and Parliament Directive on Packaging and Packaging Waste 94/62/EC. The procedure for applying this document in conjunction with the
22、 other mandated standards and reports, is specified in EN 13427 . According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard : Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, Fr
23、ance, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EN 13430:2004 (E) 4 Introduction The Directive on Packaging and Packaging Waste (94/62/EC) defines
24、essential requirements for packaging to be considered recoverable. This document amplifies these requirements with respect to material recycling. The European Standard EN 13427 provides a framework within which this and four other standards may be used together to support a claim that a packaging is
25、 in compliance with the essential requirements for packaging to be placed on the market as required by the Directive. NOTE The Directive 94/62/EC is amended by European Parliament and Council Directive 2004/12/EC of 11 February 2004. The purpose of packaging is the containment, protection, distribut
26、ion and presentation of products. Material recycling of used packaging is one of several recovery options in the post use strategy. In order to save resources and minimise waste, the whole system in which the packaging takes part should be optimised. This includes prevention as well as reuse and rec
27、overy of packaging waste. This document presents a framework for self-assessment to determine whether the requirements of this document have been met. Its approach is similar to that of systems standards such as the EN ISO 9000 series or an environmental management system such as EN ISO 14001. This
28、document also provides practical guidance in assessing recyclability. EN 13430:2004 (E) 5 1 Scope This document specifies the requirements for packaging to be classified as recoverable in the form of material recycling whilst accommodating the continuing development of both packaging and recovery te
29、chnologies and sets out procedures for assessment of conformity with those requirements. This document cannot by itself provide presumption of conformity. The procedure for applying this document is contained in EN 13427. 2 Normative References The following referenced documents are indispensable fo
30、r the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 13193, Packaging Packaging and the Environment Terminology. EN 13427:2004, Packaging and the Environm
31、ent Requirements for the use of European Standards in the field of packaging and packaging waste. EN 13437:2003, Packaging and material recycling Criteria for recycling methods Description of recycling processes and flow chart. CR 13688:2000, Packaging Material recycling Report on requirements for s
32、ubstances and materials to prevent a sustained impediment to recycling. CR 14311; Packaging Marking and material identification system 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 13193, EN 13427, EN 13437 and the following apply: 3.1 empty packagi
33、ng packaging is empty if - under normal and foreseeable circumstances - all product residues that can be removed by the emptier have been removed using practices commonly employed for that type of packaging A non-exhaustive list of common practices includes: removing an inner liner; pouring; pumping
34、; aspirating; shaking; scraping; EN 13430:2004 (E) 6 squeezing; rinsing; wiping-out. 3.2 primary raw material material which has never been processed into any form of end use product 3.3 recycling reprocessing in a production process of the waste materials for the original purpose or for other purpo
35、ses including organic recycling but excluding energy recovery 94/62/EC 3.4 recycling process physical and/or chemical process which converts collected and sorted used packaging and scrap, together in some instances with other material, into secondary raw material or products NOTE A description of re
36、levant recycling processes is given in EN 13437. 3.5 secondary raw material material recovered for use as a raw material from used products and from scrap with the exception of the scrap arising within a primary production process EN 13437 NOTE The precise nature of the primary production process ma
37、y vary between material sectors. Reference to the relevant flow diagram in EN 13437 will clearly identify this process. 3.6 supplier entity responsible for placing packaging or packed product on the market EN 13427 4 Requirements 4.1 Application The application of this document to any particular pac
38、kaging shall be as specified in EN 13427. 4.2 Packaging assessment The supplier shall be able to demonstrate that the procedures defined in normative Annexes A and B have been followed in arriving at the final design of the finished packaging such that a certain percentage of the packaging materials
39、 can be claimed to be recyclable. 4.3 Declaration of percentage recyclable Packaging may use more than one material whose relative proportions may vary from small components and constituents, typically represented by labels and closures, to larger proportions in multi-material packaging. The supplie
40、r shall declare the percentage by weight of the functional unit of packaging available for recycling, identifying the intended material recycling stream(s), reference EN 13437. A format for this declaration is given in Annex C. NOTE 1 The functional unit is explained in EN 13427:2004, Clause 4.3. EN
41、 13430:2004 (E) 7 NOTE 2 CR 13688 provides guidance on materials and substances that may cause sustained impediment to the material recycling of the functional unit of packaging. Contamination of the packaging by contact with extraneous materials in the collection and sorting processes, or by residu
42、es of the packaging content, even after cleaning, are not considered as impediments to the material recycling. 4.4 Conformity of the packaging with this document (material recycling) The supplier shall prepare a written statement of compliance with the requirements stated in 4.2 and 4.3. 4.5 Support
43、 Documentation The assessment shall be documented and examples of the structure of such documentation are given in Annex C. EN 13430:2004 (E) 8 Annex A (normative) Procedures to elaborate the requirements for packaging recoverable by material recycling A.1 Objective To identify the criteria that nee
44、d to be taken into consideration when assessing the recyclability of packaging. These criteria for recycling should be considered in a perspective which includes all relevant aspects from the design of packaging, its manufacture and through its use and post-use collection and sorting until its recov
45、ery by recycling. This perspective is conveniently illustrated and checked through the matrix approach presented in Table A.1, which represents a guideline to elaborate practical requirements for packaging recoverable in the form of material recycling. The relevant boxes in the Table A.1 highlight t
46、he interactions between life cycle steps and criteria for recyclable packaging. A.2 Control of packaging construction/composition and processing A.2.1 Ensure that the design of packaging includes consideration of aspects significant for the recycling of the materials from which it is produced. A.2.2
47、 Control selection of raw materials used in production /packing / filling operations and where practicable collection/ sorting operations to ensure that the recycling processes are not negatively affected. A.3 Suitability for available recycling technology A.3.1 Ensure that the design of packaging m
48、akes use of materials or combinations of materials which are compatible with the known, relevant and industrially available recycling technologies whilst also recognising the interrelationship of standards as detailed in 4.1. NOTE The development and marketing of new packaging materials and systems,
49、 typically giving functional and environmental benefits may precede the introduction of appropriate recycling processes. It is recognised that the development and expansion of such recycling processes may take a period of time. Provided that the supplier can demonstrate that there is development leading to the availability of industrial recycling capacity within a reasonable period of time it may be appropriate during this period to classify such packaging as recycla
链接地址:https://www.31doc.com/p-3741224.html