BS-EN-15282-2007.pdf
《BS-EN-15282-2007.pdf》由会员分享,可在线阅读,更多相关《BS-EN-15282-2007.pdf(32页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 15282:2007 Vitreous and porcelain enamels Design of bolted steel tanks for the storage or treatment of water or municipal or industrial effluents and sludges The European Standard EN 15282:2007 has the status of a British Standard ICS 25.220.50; 23.020.10; 13.060.01 ? Licensed
2、 Copy: London South Bank University, London South Bank University, Mon Apr 16 02:43:16 GMT+00:00 2007, Uncontrolled Copy, (c) BSI BS EN 15282:2007 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 April 2007 BSI 2007 ISBN 978 0 580 50486 0 N
3、ational foreword This British Standard was published by BSI. It is the UK implementation of EN 15282:2007. The UK participation in its preparation was entrusted to Technical Committee STI/36, Vitreous enamel coatings. A list of organizations represented on STI/36 can be obtained on request to its se
4、cretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. Amendments issued since publication Amd. No. DateComments Licensed Co
5、py: London South Bank University, London South Bank University, Mon Apr 16 02:43:16 GMT+00:00 2007, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 15282 March 2007 ICS 25.220.50; 23.020.10; 13.060.01 English Version Vitreous and porcelain enamels - Design of bolted s
6、teel tanks for the storage or treatment of water or municipal or industrial effluents and sludges Emaux vitrifis - Conception de rservoirs en acier, boulonns et revtus dmail vitrifi pour le stockage ou le traitement des eaux ou des effluents deaux uses principales Emails und Emaillierungen - Gestalt
7、ung von verschraubten Stahlbehltern fr die Speicherung oder Behandlung von Wasser oder kommunalen und industriellen Abwssern und Abwasserschlamm This European Standard was approved by CEN on 3 February 2007. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate th
8、e conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists
9、in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodi
10、es of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUR
11、OPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2007 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15282:2007: E Licensed Cop
12、y: London South Bank University, London South Bank University, Mon Apr 16 02:43:16 GMT+00:00 2007, Uncontrolled Copy, (c) BSI EN 15282:2007 (E) 2 Contents Page Foreword3 1 Scope 4 2 Normative references4 3 Terms and definitions .5 4 Symbols and abbreviated terms 7 5 Units8 6 Information and requirem
13、ents to be agreed and documented .9 6.1 General9 6.2 Information to be provided by the purchaser.9 6.3 Information to be provided by the designer .10 7 Applicable standards 10 8 Loads 11 8.1 General11 8.2 Contents .11 8.3 Tank structure12 8.4 Roof.12 8.5 Equipment loads12 8.6 Access 13 8.7 Environme
14、ntal13 8.8 Ancillary items .14 9 Design.14 9.1 General14 9.2 Steel 14 9.3 Tank.14 9.4 Openings 20 9.5 Effects of accidents.21 10 Vitreous enamel coating .21 10.1 Vitreous enamel.21 10.2 Coating22 10.3 Vitreous enamel quality 22 10.4 Protection during shipping.27 10.5 Maintenance.27 11 Installation27
15、 11.1 General guidance.27 11.2 Foundations .27 11.3 Inspection of the vitreous enamel coating at the construction site.27 12 Disinfection 27 Bibliography28 Licensed Copy: London South Bank University, London South Bank University, Mon Apr 16 02:43:16 GMT+00:00 2007, Uncontrolled Copy, (c) BSI EN 152
16、82:2007 (E) 3 Foreword This document (EN 15282:2007) has been prepared by Technical Committee CEN/TC 262 “Metallic and other inorganic coatings”, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical te
17、xt or by endorsement, at the latest by September 2007, and conflicting national standards shall be withdrawn at the latest by September 2007. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standa
18、rd: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. Licen
19、sed Copy: London South Bank University, London South Bank University, Mon Apr 16 02:43:16 GMT+00:00 2007, Uncontrolled Copy, (c) BSI EN 15282:2007 (E) 4 1 Scope This European Standard establishes the requirement for the design and use of vitreous enamel coated bolted cylindrical steel tanks for the
20、storage or treatment of water or municipal or industrial effluents and sludges. This European Standard applies to the design of the tank and any associated roof and gives guidance on the requirements for the design of the foundation. This European Standard applies where: a) the tank is cylindrical a
21、nd symmetrical on plan and is mounted on a load-bearing base substantially at or above ground level; b) the multiple of the tank diameter in meters and the wall height in meters has a value within the range 5 to 500; c) the tank diameter does not exceed 100 m, and the total wall height does not exce
22、ed 50 m; d) the stored material has the characteristics of a liquid exerting negligible friction force in the tank wall; the stored material may be undergoing treatment as part of a municipal or industrial effluent treatment process; e) the internal pressure above the liquid does not exceed 50 kPa a
23、nd the internal partial vacuum above the liquid does not exceed 10 kPa; f) the walls of the tank are vertical; g) the floor of the tank is substantially flat at its intersection with the wall; the floor of the tank may have a rise or fall built in to allow complete emptying of the tank contents. The
24、 slope should not exceed 1:100; h) there is negligible inertial and impact load due to tank filling; i) the minimum thickness of the tank shell is 1,5 mm; j) the material used for the manufacture of the steel sheets is carbon steel; (tanks constructed of sheets made from aluminium or stainless steel
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 15282 2007
链接地址:https://www.31doc.com/p-3741376.html