BS-EN-20090-1-1993 ISO-90-1-1986.pdf
《BS-EN-20090-1-1993 ISO-90-1-1986.pdf》由会员分享,可在线阅读,更多相关《BS-EN-20090-1-1993 ISO-90-1-1986.pdf(24页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 20090-1:1993 ISO 90-1:1986 Incorporating Amendment No. 1 Light gauge metal containers Definitions and determination methods for dimensions and capacities Part 1: Open-top cans The European Standard EN 20090-1:1992 has the status of a British Standard UDC 621.789.144:672.46 Lic
2、ensed Copy: sheffieldun sheffieldun, na, Fri Nov 03 08:04:46 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 20090-1:1993 This British Standard, having been prepared under the direction of the Packaging and Freight Containers Standards Committee, was published under the authority of the Board of BS
3、I and comes into effect on 31 October 1988 BSI 09-1999 The following BSI references relate to the work on this standard: Committee reference PKM/561 Draft for comment 84/40195 DC ISBN 0 580 16709 7 Committees responsible for this British Standard The preparation of this British Standard was entruste
4、d by the Packaging and Freight Containers Standards Committee (PKM/-) to Technical Committee PKM/561, upon which the following bodies were represented: Engineering Equipment and Materials Users Association International Tin Research Institute Metal Packaging Manufacturers Association Ministry of Def
5、ence Paintmakers Association of Great Britain Ltd. The following bodies were also represented in the drafting of the standard, through subcommittees and panels: Association of British Preserved Milk Manufacturers Bacon and Meat Manufacturers Association Brewers Society British Aluminium Foil Rollers
6、 Association British Soft Drinks Council Campden Food Preservation Research Association Co-operative Union Department of Trade and Industry (Laboratory of the Government Chemist) Food and Drink Federation Pet Food Manufacturers Association Amendments issued since publication Amd. No.Date of issueCom
7、ments 7478March 1993Indicated by a sideline in the margin Licensed Copy: sheffieldun sheffieldun, na, Fri Nov 03 08:04:46 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 20090-1:1993 BSI 09-1999i Contents Page Committees responsibleInside front cover National forewordii Foreword2 0Introduction3 1Sc
8、ope and field of application3 2Definitions3 3Determination of dimensions9 4Determination of gross lidded capacity10 5Tolerances on capacities11 6Designation12 Annex A Measurement of height14 Annex B Determination of gross lidded capacity, C (cans filled with product)14 Figure 14 Figure 24 Figure 35
9、Figure 45 Figure 55 Figure 66 Figure 76 Figure 87 Figure 97 Figure 108 Figure 118 Figure 129 Figure 1313 Figure 1414 Figure 1516 Figure 1616 Figure 1716 Figure 1816 Figure 1916 Table 1 Correction factors10 Table 2 Balance accuracy10 Table 3 Tolerances on gross lidded capacities for round cans12 Tabl
10、e 4 Tolerances on gross lidded capacities for non-round cans12 Publications referred toInside back cover Licensed Copy: sheffieldun sheffieldun, na, Fri Nov 03 08:04:46 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 20090-1:1993 ii BSI 09-1999 National foreword This Part of BS 6966 has been prepar
11、ed under the direction of the Packaging and Freight Containers Standards Committee. It is identical with ISO 90-1:1986 “Light gauge metal containers Definitions and determination methods for dimensions and capacities Part 1: Open-top cans”, published by the International Organization for Standardiza
12、tion (ISO). This Part of BS 6966 supersedes BS 5596:1978 which is withdrawn. Other Parts in the series are as follows: Part 2: Glossary of terms for general use containers and methods for determination of dimensions and capacities; Part 3: Glossary of terms for aerosol cans and methods for determina
13、tion of dimensions and capacities. In 1992 the European Committee for Standardization (CEN) accepted ISO 90-1:1986 as European Standard EN 20090-1:1992. As a consequence of implementing the European Standard this British Standard is renumbered as BS EN 20090-1 and any reference to BS 6966-1 should b
14、e read as a reference to BS EN 20090-1. Terminology and conventions. The text of the International Standard has been approved as suitable for publication as a British Standard without deviation. Some terminology and certain conventions are not identical with those used in British Standards; attentio
15、n is drawn especially to the following. The comma has been used as a decimal marker. In British Standards it is current practice to use a full point on the baseline as the decimal marker. Wherever the words “ISO 90” or “part of ISO 90” appear, referring to this standard, they should be read as “BS 6
16、966” or “Part of BS 6966”, respectively. The Technical Committee has reviewed the provisions of ISO 3004-4, to which reference is made in the text and has decided that it is acceptable for use in conjunction with this standard. Cross-references International StandardCorresponding British Standard IS
17、O 1361:1983BS 5774:1984 Specification for internal diameters of round hermetically sealed metal cans for food and non-carbonated drinks (Identical) ISO 3004BS 6992 Capacities and related cross sections of open-top cans for food and drinks Part 1:1986Part 1:1988 Recommendations for cans for general f
18、ood (Identical) Part 3:1986Part 3:1988 Recommendations for cans for drinks (Identical) Part 5:1988Part 4:1989 Recommendations for fish and other fishery products (Identical) Part 6:1986Part 5:1988 Recommendations for cans for milk (Identical) Licensed Copy: sheffieldun sheffieldun, na, Fri Nov 03 08
19、:04:46 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 20090-1:1993 BSI 09-1999iii A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itse
20、lf confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i to iv, the EN title page, pages 2 to 16, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporat
21、ed. This will be indicated in the amendment table on the inside front cover. Licensed Copy: sheffieldun sheffieldun, na, Fri Nov 03 08:04:46 GMT+00:00 2006, Uncontrolled Copy, (c) BSI iv blank Licensed Copy: sheffieldun sheffieldun, na, Fri Nov 03 08:04:46 GMT+00:00 2006, Uncontrolled Copy, (c) BSI
22、EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 20090-1 November 1992 UDC 621.789.144:672.46 Descriptors: Containers, metal packaging, cans, definitions, capacity, dimensions, volume measurement, specifications English version Light gauge metal containers Definitions and determination methods f
23、or dimensions and capacities Part 1: Open-top cans (ISO 90-1:1986) Rcipients mtalliques lgers Dfinitions et mthodes de dtermination des dimensions et des capacits Partie 1: Botes serties (ISO 90-1:1986) Verpackungen aus Feinstblech Begriffe und Verfahren zur Bestimmung von Abmessungen und Volumen Te
24、il 1: Falzdeckeldosen (ISO 90-1:1986) This European Standard was approved by CEN on 1992-10-30. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-d
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS-EN-20090-1-1993 ISO-90-1-1986 BS EN 20090 1993 ISO 90 1986
链接地址:https://www.31doc.com/p-3741483.html