BS-EN-15337-2007.pdf
《BS-EN-15337-2007.pdf》由会员分享,可在线阅读,更多相关《BS-EN-15337-2007.pdf(14页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 15337:2007 Adhesives Determination of shear strength of anaerobic adhesives using pin-and-collar specimens The European Standard EN 15337:2007 has the status of a British Standard ICS 83.180 ? Licensed Copy: London South Bank University, London South Bank University, Fri Nov 1
2、6 07:52:05 GMT+00:00 2007, Uncontrolled Copy, (c) BSI BS EN 15337:2007 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 November 2007 BSI 2007 ISBN 978 0 580 55811 5 National foreword This British Standard is the UK implementation of EN 153
3、37:2007. CEN common modifications to ISO 10123:1990 are indicated by . The UK participation in its preparation was entrusted to Technical Committee PRI/52, Adhesives. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport
4、to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. Amendments issued since publication Amd. No. DateComments Licensed Copy: London South Bank University, London So
5、uth Bank University, Fri Nov 16 07:52:05 GMT+00:00 2007, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 15337 September 2007 ICS 83.180 English Version Adhesives - Determination of shear strength of anaerobic adhesives using pin-and-collar specimens (ISO 10123:1990 m
6、odified) Adhsifs - Dtermination de la rsistance au cisaillement des adhsifs anarobies sur assemblage de type axe- bague (ISO 10123:1990 modifie) Klebstoffe - Bestimmung der Scherfestigkeit von anaeroben Klebstoffen unter Verwendung von Bolzen-Hlse- Probekrpern (ISO 10123:1990 modifiziert) This Europ
7、ean Standard was approved by CEN on 28 July 2007. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references conce
8、rning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its ow
9、n language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithua
10、nia, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2007
11、CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15337:2007: E Licensed Copy: London South Bank University, London South Bank University, Fri Nov 16 07:52:05 GMT+00:00 2007, Uncontrolled Copy, (c) BSI EN 15337:2007 (E) 2 Contents Pag
12、e Foreword3 1 Scope 4 2 Normative references4 3 Principle4 4 Apparatus .4 5 Preparation of test specimens .4 6 Procedure .5 7 Precision.6 8 Test report6 Annex A (informative) Example of adoption for tensile testing machine10 Bibliography11 Licensed Copy: London South Bank University, London South Ba
13、nk University, Fri Nov 16 07:52:05 GMT+00:00 2007, Uncontrolled Copy, (c) BSI EN 15337:2007 (E) 3 Foreword This document (EN 15337:2007) has been prepared by Technical Committee CEN/TC 193 “Adhesives”, the secretariat of which is held by AENOR. This European Standard shall be given the status of a n
14、ational standard, either by publication of an identical text or by endorsement, at the latest by March 2008, and conflicting national standards shall be withdrawn at the latest by March 2008. Attention is drawn to the possibility that some of the elements of this document may be the subject of paten
15、t rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cypr
16、us, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Safety statement Persons using this d
17、ocument should be familiar with the principles of normal laboratory practices. This document does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user to establish appropriate safety and health practices and ensure compliance with a
18、ny regulatory conditions. Licensed Copy: London South Bank University, London South Bank University, Fri Nov 16 07:52:05 GMT+00:00 2007, Uncontrolled Copy, (c) BSI EN 15337:2007 (E) 4 1 Scope This European Standard specifies a method for the determination of the shear strength of anaerobic-curing li
19、quid adhesives used for retaining cylindrical assemblies pin-and-collar type, or for locking and sealing threaded fasteners. This test method may also be used for other adhesives. The test is for ranking and quality control of adhesives. The result does not necessarily reflect the performance of the
20、 materials in service and the test is not suitable for providing numerical data for design purposes. NOTE Numerical design data may be obtained from tests using the materials and configurations used in the actual structure. 2 Normative references The following referenced documents are indispensable
21、for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN ISO 7500-1, Metallic materials Verification of static uniaxial testing machines Part 1: Tension/com
22、pression testing machines Verification and calibration of the force-measuring system (ISO 75001:2004) 3 Principle The force required to shear the adhesive joint formed between a metal pin and a metal collar is determined. The static shear strength is calculated from this force. 4 Apparatus 4.1 Unive
23、rsal testing machine, complying with EN ISO 7500-1, class 1. The machine shall be able to apply a compressive force directly or indirectly. An example of a jig for compression testing for use on a pure tensile testing machine is shown in Annex A. 4.2 Test specimen support, made of hardened steel, as
24、 shown in Figure 1, for positioning the test specimen on the universal testing machine. 4.3 Non-adhering material sheet (e.g. polyethylene sheet). 5 Preparation of test specimens 5.1 General Assemble no less than five specimens for each test as described below. 5.2 Each specimen shall be comprised o
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 15337 2007
链接地址:https://www.31doc.com/p-3741836.html