BS-EN-40-2-2004.pdf
《BS-EN-40-2-2004.pdf》由会员分享,可在线阅读,更多相关《BS-EN-40-2-2004.pdf(28页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 40-2:2004 Lighting columns Part 2: General requirements and dimensions The European Standard EN 40-2:2004 has the status of a British Standard ICS 93.080.40 ? BS EN 40-2:2004 This British Standard was published under the authority of the Standards Policy and Strategy Committee
2、 on 13 October 2004 BSI 13 October 2004 ISBN 0 580 44591 7 National foreword This British Standard is the official English language version of EN 40-2:2004. It supersedes BS 5649-2:1978 which is withdrawn. It will partially supersede BS 5649-5 by amendment. The UK participation in its preparation wa
3、s entrusted to Technical Committee B/509, Road equipment, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in t
4、his document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a c
5、ontract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposal
6、s for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 24, an inside back cover and a back cover. The BSI cop
7、yright notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. DateComments EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 40-2 October 2004 ICS 93.080.40Supersedes EN 40-2:1976 English version Lighting columns - Part 2: Gener
8、al requirements and dimensions Candlabres dclairage public - Partie 2: Prescriptions gnrales et dimensions Lichtmaste - Teil 2: Allgemeine Anforderungen und Mae This European Standard was approved by CEN on 16 August 2004. CEN members are bound to comply with the CEN/CENELEC Internal Regulations whi
9、ch stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Sta
10、ndard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national sta
11、ndards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN CO
12、MMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2004 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 40-2:2004: E EN 40-2:2004 (E) 2 Co
13、ntents page Foreword. 3 1 Scope 4 2 Normative references . 4 3 Terms and definitions. 4 4 Main dimensions. 5 4.1 Post top columns 5 4.2 Columns with brackets. 5 4.3 Door openings and cable entry slots 8 4.3.1 Door openings. 8 4.3.2 Cable entry slots. 8 4.4 Base compartments and cableways. 10 4.4.1 C
14、ompartment dimensions 10 4.4.2 Compartment door 10 4.4.3 Attachment of electrical equipment 10 4.4.4 Electrical cableways. 10 4.4.5 Protection category 10 4.4.6 Earthing terminals. 13 4.5 Column planting depth and base plate. 13 4.5.1 Planting depth . 13 4.5.2 Base plate 13 4.6 Flange plates . 15 4.
15、7 Connection dimensions for lanterns 16 4.7.1 General. 16 4.7.2 Post top lanterns. 17 4.7.3 Side entry lanterns 18 5 Tolerances . 19 5.1 Straightness 19 5.2 Total length of post top columns 20 5.3 Total length of columns with brackets . 20 5.4 Bracket projection. 21 5.5 Lantern fixing angle 21 5.6 D
16、oor opening and cable entry slot 21 5.7 Column cross-section 21 5.7.1 Metal columns. 21 5.7.2 Concrete columns. 21 5.8 Connection dimensions for lantern fixing 21 5.9 Twist in columns. 22 5.9.1 Columns with roots. 22 5.9.2 Columns with flange plates . 22 5.10 Thickness tolerance 22 5.11 Verticality
17、tolerance 22 Annex A (informative) Passive safety 23 Bibliography . 24 EN 40-2:2004 (E) 3 Foreword This document (EN 40-2:2004) has been prepared by Technical Committee CEN/TC 50 “Lighting columns and spigots”, the secretariat of which is held by BSI. This European Standard shall be given the status
18、 of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2005, and conflicting national standards shall be withdrawn at the latest by April 2005. This document supersedes EN 40-2:1976. This European Standard has been prepared under a mandate given
19、 to CEN by the European Commission and the European Free Trade Association. This Part gives the necessary requirements for specifiers and manufacturers of columns. The majority of lighting columns are made from steel, aluminium or concrete and are normally of a stepped tubular, round, octagonal or p
20、olygonal cross-section. They are usually of neutral design with a lantern spigot either at the post top or at the end of a bracket and are produced to certain standard dimensions and tolerances. This Part of EN 40 is the second in a series relating to specifications for lighting columns. When comple
21、te, EN 40 will consist of the following Parts: Part 1: Definitions and terms Part 2: Dimensions and tolerances Part 3: Design and verification 3-1 Specification for characteristic loads 3-2 Verification by testing 3-3 Verification by calculation Part 5: Requirements for steel lighting columns Part 6
22、: Requirements for aluminium lighting columns Part 7: Requirements for fibre reinforced polymer composite lighting columns According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgiu
23、m, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EN 40-2:2004 (E) 4 1 Scope This document sp
24、ecifies the requirements and dimensions for lighting columns, brackets, base compartments, cableways and earthing terminals. It applies to post top columns not exceeding 20 m height for post top lanterns and columns with brackets not exceeding 18 m height for side entry lanterns. This Part does not
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 40 2004
链接地址:https://www.31doc.com/p-3742080.html