BS-EN-442-2-1997.pdf
《BS-EN-442-2-1997.pdf》由会员分享,可在线阅读,更多相关《BS-EN-442-2-1997.pdf(64页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 442-2:1997 Incorporating Amendments Nos. 1 and 2 Radiators and convectors Part 2: Test methods and rating The European Standard EN 442-2:1996, with the incorporation of amendments A1:2000 and A2:2003, has the status of a British Standard ICS 91.140.10 ? BS EN 422-2:1997 This B
2、ritish Standard, having been prepared under the direction of the Engineering Sector Board, was published under the authority of the Standards Board and comes into effect on 15 January 1997 BSI 19 November 2003 The following BSI references relate to the work on this standard: Committee reference RHE/
3、6 Draft for comment 91/78545 DC ISBN 0 580 26472 6 Committees responsible for this British Standard The preparation of this British Standard was entrusted to Technical Committee RHE/6, Air or space heaters and coolers without combustion, upon which the following bodies were represented: Aluminium Fe
4、deration Association of British Health-Care Industries Boiler and Radiator Manufacturers Association Limited British Refrigeration Association Building Services Research and Information Association Chartered Institution of Building Services Engineers Hevac Association Institute of Domestic Heating E
5、ngineers Institute of Refrigeration Manufacturers Association of Radiators and Convectors Limited National Association of Plumbing, Heating and Mechanical Services Contractors University of Portsmouth Amendments issued since publication Amd. No.DateComments 13293July 2001Addition of Annex H 1474219
6、November 2003 Addition of Annex J BS EN 422-2:1997 BSI 19 November 2003 i Contents Page Committees responsibleInside front cover National forewordii Foreword2 Text of EN 442-25 BS EN 422-2:1997 ii BSI 19 November 2003 National foreword This British Standard has been prepared by Technical Committee R
7、HE/6, and is the English language version of EN 442-2:1996 Radiators and convectors Part 2: Test methods and rating, including amendments A1:2000 and A2:2003, published by the European Committee for Standardization (CEN). EN 442-2 was produced as a result of international discussions in which the Un
8、ited Kingdom took an active part. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility
9、of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Su
10、mmary of pages This document comprises a front cover, an inside front cover, pages i and ii, the EN title page, pages 2 to 58, an inside back cover and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. EUROPEAN STANDARD NORME EUROPENNE EUR
11、OPISCHE NORM EN 442-2 July 1996 +A1 June 2000 +A2 August 2003 ICS 91.140.10 Descriptors: Heaters, heat radiators, convectors, heating units, tests, calorific power, marking English version Radiators and convectors Part 2: Test methods and rating (includes amendments A1:2000 and A2:2003) Radiateurs e
12、t convecteurs Partie 2: Mthodes dessai et dvaluation (inclut les amendements A1:2000 et A2:2003) Radiatoren und Konvektoren Teil 2: Prfverfahren und Leistungsangabe (enthlt nderungen A1:2000 und A2:2003) This European Standard was approved by CEN on 1995-06-02. Amendment A1 was approved by CEN on 19
13、99-11-15. Amendment A2 was approved by CEN on 20 June 2003. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical refere
14、nces concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member int
15、o its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Denmark, Finland, France, Germany, Hungary, Greece, Iceland, Ireland, Italy, Malta, Luxembourg, Netherlands, Norway, Portugal, S
16、lovakia, Spain, Sweden, Switzerland and United Kingdom. CEN European Committee for Standardization Comit Europen de Normalisation Europisches Komitee fr Normung Central Secretariat: rue de Stassart 36, B-1050 Brussels 1996 Copyright reserved to CEN members Ref. No. EN 442-2:1996 + A1:2000 + A2:2003
17、E EN 442-2:1996 BSI 19 November 20032 Foreword This European Standard has been prepared by the Technical Committee CEN/TC 130, Space heating appliances without integral heat sources, the secretariat of which is held by UNI This European Standard comes from an output of the project SMT4 CT97 2127 fun
18、ded by the European Commission DGXII-RDT This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 1997, and conflicting national standards shall be withdrawn at the latest by January 1997. Accordin
19、g to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Sw
20、itzerland and United Kingdom. Foreword to amendment A1 This amendment EN 442-2:1996/A1:2000 to the EN 442-2:1996 has been prepared by Technical Committee CEN/TC 130, Space heating appliances without integral heat sources, the Secretariat of which is held by UNI. This amendment to the European Standa
21、rd EN 442-2:1996 shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2000, and conflicting national standards shall be withdrawn at the latest by December 2000. According to the CEN/CENELEC Internal Regulations, th
22、e national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
23、 Foreword to amendment A2 This document (EN 442-2:1996/A2:2003) has been prepared by Technical Committee CEN/TC 130, Space heating appliances without integral heat sources, the Secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by pub
24、lication of an identical text or by endorsement, at the latest by February 2004, and conflicting national standards shall be withdrawn at the latest by February 2004. According to the CEN/CENELEC Internal Regulations, the national standards organization of the following countries are bound to implem
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 442 1997
链接地址:https://www.31doc.com/p-3742283.html