BS-EN-4530-001-2006.pdf
《BS-EN-4530-001-2006.pdf》由会员分享,可在线阅读,更多相关《BS-EN-4530-001-2006.pdf(14页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 4530-001:2006 Aerospace series Sealing sleeves used in elements of connection Part 001: Technical specification The European Standard EN 4530-001:2006 has the status of a British Standard ICS 49.060 ? Licensed Copy: London South Bank University, London South Bank University, S
2、un Dec 24 04:34:14 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 4530-001:2006 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 October 2006 BSI 2006 ISBN 0 580 49475 6 National foreword This British Standard was published by BSI. It is
3、the UK implementation of EN 4530-001:2006. The UK participation in its preparation was entrusted by Technical Committee ACE/6, Aerospace avionic electrical and fibre optic technology, to Subcommittee ACE/6/-/3, Aerospace Connectors. A list of organizations represented on ACE/6/-/3 can be obtained on
4、 request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. Amendments issued since publication Amd. No. DateCo
5、mments Licensed Copy: London South Bank University, London South Bank University, Sun Dec 24 04:34:14 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 4530-001 May 2006 ICS 49.060 English Version Aerospace series - Sealing sleeves used in elements of co
6、nnection - Part 001: Technical specification Srie arospatiale - Manchons dtanchit utiliss dans les organes de connexion - Partie 001 : Spcification technique Luft- und Raumfahrt - Dichtungshlse zur Verwendung in Verbindungselementen - Teil 001: Technische Lieferbedingungen This European Standard was
7、 approved by CEN on 20 February 2006. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such n
8、ational standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and
9、 notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Ne
10、therlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2006 CENAll rights of exploitat
11、ion in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4530-001:2006: E Licensed Copy: London South Bank University, London South Bank University, Sun Dec 24 04:34:14 GMT+00:00 2006, Uncontrolled Copy, (c) BSI 2 Contents Page Foreword 3 1 Scope.4 2 Normative refere
12、nces .4 3 Terms and definitions.4 4 Conditions of use and temperature classes.4 5 Design and description 5 6 Dimensions and mass 5 7 Operation.5 8 Tests 5 9 Quality assurance.8 10 Designation and marking .10 11 Delivery condition.10 12 Packaging10 13 Storage 10 EN 4530-001:2006 Licensed Copy: London
13、 South Bank University, London South Bank University, Sun Dec 24 04:34:14 GMT+00:00 2006, Uncontrolled Copy, (c) BSI 3 Foreword This European Standard (EN 4530-001:2006) has been prepared by the European Association of Aerospace Manufacturers - Standardization (AECMA-STAN). After enquiries and votes
14、 carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of AECMA, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, e
15、ither by publication of an identical text or by endorsement, at the latest by November 2006, and conflicting national standards shall be withdrawn at the latest by November 2006. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN
16、 and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Den
17、mark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. EN 4530-001:2006 Licensed Copy: London South Bank University
18、, London South Bank University, Sun Dec 24 04:34:14 GMT+00:00 2006, Uncontrolled Copy, (c) BSI 4 1 Scope This standard specifies: the electrical, mechanical, environmental and dimensional characteristics of sealing sleeves used in elements of connection; the conditions for qualification if the seali
19、ng sleeves are not tested during the connector qualification, acceptance testing and quality assurance; the test programme and groups. It is applicable to removable sealing sleeves used in connectors or in other elements of electrical connection. 2 Normative references The following referenced docum
20、ents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 2859-1, Sampling procedures for inspection by attributes Part 1: Sampling s
21、chemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection. EN 2591-100*, Aerospace series Elements of electrical and optical connection Test methods Part 100: General. EN 9133, Aerospace series Quality management systems Qualification procedure for aerospace standard parts. MIL-HDBK
22、-454, General Guidelines for Electronic Equipment. 1) 3 Terms and definitions For the purposes of this standard, the terms and definitions given in EN 2591-100 and the following apply. 3.1 sealing sleeve device to prevent the ingress of contaminants and to facilitate the insertion and extraction of
23、the contact 4 Conditions of use and temperature classes The sealing sleeves specified shall be from one of the classes specified below: class P: maximum operating temperature 125 C; class R: maximum operating temperature 150 C; class S: maximum operating temperature 200 C; * And all parts quoted in
24、this standard. 1) Published by Department of Defense (DOD), the Pentagon, Washington, DC 20301, USA. EN 4530-001:2006 Licensed Copy: London South Bank University, London South Bank University, Sun Dec 24 04:34:14 GMT+00:00 2006, Uncontrolled Copy, (c) BSI 5 class T: maximum operating temperature 260
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 4530 001 2006
链接地址:https://www.31doc.com/p-3742331.html