BS-EN-474-6-2006-A1-2009 原版 可复制.pdf
《BS-EN-474-6-2006-A1-2009 原版 可复制.pdf》由会员分享,可在线阅读,更多相关《BS-EN-474-6-2006-A1-2009 原版 可复制.pdf(22页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 474-6:2006 Earth-moving machinery Safety Part 6: Requirements for dumpers ICS 53.100 ? +A1:2009 BS EN 474-6:2006+A1:2009 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 28 February 2007 BSI 2009 ISBN 978 0 580 62370 7 N
2、ational foreword This British Standard is the UK implementation of EN 474-6:2006+A1:2009. It supersedes BS EN 474-6:2006, which is withdrawn. The UK participation in its preparation was entrusted by Technical Committee B/513, Construction equipment and plant and site safety, to Subcommittee B/ 513/1
3、, Earth moving machinery (International). A list of organizations represented on this subcommittee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with
4、a British Standard cannot confer immunity from legal obligations. Amendments/corrigenda issued since publication Date Comments 31 July 2009 Implementation of CEN amendment A1:2009 The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indiating changes
5、 to CEN text carry the number of the CEN amendment. For example, text altered by CEN amendment A1 is indicated by . A1A1 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 474-6:2006+A1 February 2009 ICS 53.100 Supersedes EN 474-6:2006 English Version Earth-moving machinery - Safety - Part 6: Requ
6、irements for dumpers Engins de terrassement - Scurit - Partie 6: Prescriptions applicables aux tombereaux Erdbaumaschinen - Sicherheit - Teil 6: Anforderungen fr Muldenfahrzeuge This European Standard was approved by CEN on 17 April 2006 and includes Amendment 1 approved by CEN on 20 December 2008.
7、CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on a
8、pplication to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Cent
9、re has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Polan
10、d, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2009 CEN All rights of exploitation in any form and by
11、any means reserved worldwide for CEN national Members. Ref. No. EN 474-6:2006+A1:2009: E BS EN 474-6:2006+A1:2009BS EN 474-6:2006+A1:2009 EN 474-6:2006+A1:2009 (E) 2 Contents Page Foreword 4? Introduction .6? 1?Scope 7? 2?Normative references 7? 3?Terms and definitions .7? 4?List of additional signi
12、ficant hazards 8? 5?Requirements and/or measures .8? 5.1?General 8? 5.2?Dump body .9? 5.3?Retarder 9? 5.4?Articulated frame lock .9? 5.5?Roll-over protective structures (ROPS) .9? 5.6?Falling object protective structure (FOPS) 10? 5.7?Operators station . 11? 5.8?Steering system 12? 6?Information for
13、 use . 12? Annex A (normative) List of additional significant hazards Dumpers . 13? Annex B (informative) Illustrations . 14? Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC . 16? Annex ZB (informative) !Relationship between
14、this European Standard and the Essential Requirements of EU Directive 2006/42/EC“ 17? Bibliography . 18? Figures Figure 1 Deflection-limiting volume (DLV), front view 10 Figure B.1 Rigid frame dumper 14 Figure B.2 Articulated frame dumper 14 Figure B.3 Crawler dumper 14 Figure B.4 Wheel compact dump
15、er . 15 Figure B.5 Crawler compact dumper 15 Figure B.6 Compact dumper with self-loading equipment . 15 BS EN 474-6:2006+A1:2009 BS EN 474-6:2006+A1:2009BS EN 474-6:2006+A1:2009 EN 474-6:2006+A1:2009 (E) 3 Tables Table A.1 List of additional significant hazards . 13 BS EN 474-6:2006+A1:2009 BS EN 47
16、4-6:2006+A1:2009BS EN 474-6:2006+A1:2009 EN 474-6:2006+A1:2009 (E) 4 Foreword This document (EN 474-6:2006+A1:2009) has been prepared by Technical Committee CEN/TC 151 “Construction equipment and building material machines Safety”, the secretariat of which is held by DIN. This European Standard shal
17、l be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 2009, and conflicting national standards shall be withdrawn at the latest by December 2009. This document includes Amendment 1, approved by CEN on 2008-12-20. This docu
18、ment supersedes !EN 474-6:2006“. The start and finish of text introduced or altered by amendment is indicated in the text by tags ! “. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements
19、of EU Directive. !For relationship with EU Directive(s), see informative Annexes ZA and ZB, which are integral parts of this document.“ For bibliographic references, see !EN 474-1:2006+A1:2009“. EN 474 “Earth-moving machinery Safety“ comprises the following parts: Part 1: General requirements Part 2
20、: Requirements for tractor-dozers Part 3: Requirements for loaders Part 4: Requirements for backhoe-loaders Part 5: Requirements for hydraulic excavators Part 6: Requirements for dumpers Part 7: Requirements for scrapers Part 8: Requirements for graders Part 9: Requirements for pipelayers Part 10: R
21、equirements for trenchers Part 11: Requirements for earth and landfill compactors Part 12: Requirements for cable excavators This European Standard is intended for use in combination with Part 1 of the series. According to the CEN/CENELEC Internal Regulations, the national standards organizations of
22、 the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, BS EN 474-6:2006+A1:2009 BS EN 474-6:2006+A1:2009BS EN 474-6:2006+A1:2009 EN 474-6
23、:2006+A1:2009 (E) 5 Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. BS EN 474-6:2006+A1:2009 BS EN 474-6:2006+A1:2009BS EN 474-6:2006+A1:2009 EN 474-6:2006+A1:2009 (E) 6 Introduction This part of EN 474
24、is a type C standard as stated in EN ISO 12100-1:2003. The machinery concerned and the extent to which hazards, hazardous situations and events are covered are indicated in the scope of this document. When provisions of this type C standard are different from those which are stated in type A or B st
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS-EN-474-6-2006-A1-2009 原版 可复制 BS EN 474 2006 A1 2009 复制
链接地址:https://www.31doc.com/p-3742765.html