BS-EN-474-9-2006.pdf
《BS-EN-474-9-2006.pdf》由会员分享,可在线阅读,更多相关《BS-EN-474-9-2006.pdf(18页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 474-9:2006 Earth-moving machinery Safety Part 9: Requirements for pipelayers The European Standard EN 474-9:2006 has the status of a British Standard ICS 53.100 ? BS EN 474-9:2006 This British Standard was published under the authority of the Standards Policy and Strategy Comm
2、ittee on 28 February 2007 BSI 2007 ISBN 978 0 580 50159 3 National foreword This British Standard was published by BSI. It is the UK implementation of EN 474-9:2006. It supersedes BS EN 474-9:1998, which will be withdrawn on 1 November 2008. The UK participation in its preparation was entrusted by T
3、echnical Committee B/513, Construction equipment and plant and site safety, to Subcommittee B/513/1, Earth moving machinery (International). A list of organizations represented on B/513/1 can be obtained on request to its secretary. The transition period is to allow stock of products manufactured to
4、 BS EN 474-9:1998 to be exhausted and for manufacturers to adopt the requirements of the revised standard. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immu
5、nity from legal obligations. Amendments issued since publication Amd. No. DateComments EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 474-9 November 2006 ICS 53.100Supersedes EN 474-9:1998 English Version Earth-moving machinery - Safety - Part 9: Requirements for pipelayers Engins de terasseme
6、nt - Scurit - Partie 9: Prescriptions applicables aux poseurs de canalisations Erdbaumaschinen - Sicherheit - Teil 9: Anforderungen fr Rohrverleger This European Standard was approved by CEN on 17 April 2006. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate t
7、he conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists i
8、n three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies
9、of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITT
10、EE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2006 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 474-9:2006: E EN 474-9:2006 (E) 2 Conte
11、nts Page Introduction.4 1 Scope 5 2 Normative references5 3 Terms and definitions .6 4 List of additional significant hazards 6 5 Safety requirements and/or measures 6 6 Information for use9 Annex A (normative) List of additional significant hazards Pipelayers10 Annex B (informative) Illustrations11
12、 Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC13 Bibliography14 Figures Figure B.1 Crawler pipelayer 11 Figure B.2 Wheel pipelayer 11 Figure B.3 Pipelayer side view. 12 Figure B.4 Crawler pipelayer with a rotating upper str
13、ucture 12 Tables Table A.1 List of additional significant hazards. 10 EN 474-9:2006 (E) 3 Foreword This document (EN 474-9:2006) has been prepared by Technical Committee CEN/TC 151 “Construction equipment and building material machines Safety”, the secretariat of which is held by DIN. This European
14、Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2007, and conflicting national standards shall be withdrawn at the latest by November 2008. This European Standard supersedes EN 474-9:1998. This document has
15、 been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive. For relationship with EU Directive, see informative Annex ZA, which is an integral part of this document. For bibliographic references,
16、 see EN 474-1:2006. EN 474 “Earth-moving machinery Safety“ comprises the following parts: Part 1: General requirements Part 2: Requirements for tractor-dozers Part 3: Requirements for loaders Part 4: Requirements for backhoe-loaders Part 5: Requirements for hydraulic excavators Part 6: Requirements
17、for dumpers Part 7: Requirements for scrapers Part 8: Requirements for graders Part 9: Requirements for pipelayers Part 10: Requirements for trenchers Part 11: Requirements for earth and landfill compactors Part 12: Requirements for cable excavators This European Standard is intended for use in comb
18、ination with Part 1 of the series. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
19、Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. EN 474-9:2006 (E) 4 Introduction This part of EN 474 is a type C standard as stated in EN ISO 12100-1:2003. The machin
20、ery concerned and the extent to which hazards, hazardous situations and events are covered are indicated in the scope of this European Standard. When provisions of this type C standard are different from those which are stated in type A or B standards, the provisions of this type C standard take pre
21、cedence over the provisions of the other standards, for machines that have been designed and built according to the provisions of this type C standard. EN 474-9:2006 (E) 5 1 Scope This part of EN 474 deals with all significant hazards, hazardous situations and events relevant to pipelayers as define
22、d in EN ISO 6165:2006, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). The requirements of this part are complementary to the common requirements formulated in EN 474-1:2006. This part does not repeat the requirements
23、 from EN 474-1:2006, but adds or replaces the requirements for application for pipelayers. This part specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards, hazardous situations and events during commissioning, operation and maintenance of pipe
24、layers. This part specifies additional requirements for rear mounted winches. Pipelayers with rotating upper structure are excluded from the scope of this document. However, specific requirements are under development. This European Standard is not applicable to pipelayers manufactured before the da
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 474 2006
链接地址:https://www.31doc.com/p-3742766.html