BS-EN-485-2-1995.pdf
《BS-EN-485-2-1995.pdf》由会员分享,可在线阅读,更多相关《BS-EN-485-2-1995.pdf(54页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 485-2:1995 Aluminium and aluminium alloys Sheet, strip and plate Part 2: Mechanical properties The European Standard EN 485-2:1994 has the status of a British Standard UDC 669.71-41:669.715.018.26-41:620.17 Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 04 09:00:47 GMT+00
2、:00 2006, Uncontrolled Copy, (c) BSI BS EN 485-2:1995 This British Standard, having been prepared under the direction of the Engineering Sector Board, was published under the authority of the Standards Board and comes into effect on 15 April 1995 BSI 01-1999 The following BSI references relate to th
3、e work on this standard: Committee reference NFE/35 Draft for comment 91/47875 DC ISBN 0 580 23716 8 Cooperating organizations The European Committee for Standardization (CEN), under whose supervision this European Standard was prepared, comprises the national standards organizations of the followin
4、g countries: AustriaOesterreichisches Normungsinstitut BelgiumInstitut belge de normalisation DenmarkDansk Standard FinlandSuomen Standardisoimisliito, r.y. FranceAssociation franaise de normalisation GermanyDeutsches Institut fr Normung e.V. GreeceHellenic Organization for Standardization IcelandTe
5、chnological Institute of Iceland IrelandNational Standards Authority of Ireland ItalyEnte Nazionale Italiano di Unificazione LuxembourgInspection du Travail et des Mines NetherlandsNederlands Normalisatie-instituut NorwayNorges Standardiseringsforbund PortugalInstituto Portugus da Qualidade SpainAso
6、ciacin Espaola de Normalizacin y Certificacin SwedenStandardiseringskommissionen i Sverige SwitzerlandAssociation suisse de normalisation United KingdomBritish Standards Institution Amendments issued since publication Amd. No.DateComments Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 04 09:00:
7、47 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 485-2:1995 BSI 01-1999i Contents Page Cooperating organizations Inside front cover National foreword ii Foreword 2 Text of EN 485-2 5 National annex NA (informative) Committees responsible 49 National annex NB (informative) Cross-references 49 Lice
8、nsed Copy: sheffieldun sheffieldun, na, Sat Nov 04 09:00:47 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 485-2:1995 ii BSI 01-1999 National foreword This Part of the BS EN 485 has been prepared under the direction of the Engineering Sector Board and is the English language version of EN 485-2:19
9、94, Aluminium and aluminium alloys Sheet, strip and plate Part 2: Mechanical properties, published by the European Committee for Standardization (CEN). This Part of BS EN 485, together with BS EN 485-1, BS EN 485-3, BS EN 485-4, BS EN 515, BS EN 573-3 and BS EN 573-4, supersedes BS 1470:1987 which i
10、s withdrawn. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This docume
11、nt comprises a front cover, an inside front cover, pages i and ii, the EN title page, pages 2 to 48, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front
12、cover. Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 04 09:00:47 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 485-2 November 1994 ICS 77.120.10 Descriptors: Iron and steel products, rolled products, metal plates, steel strips, aluminium, alumi
13、nium alloys, mechanical properties, tension tests, bend tests, hardness tests, resistivity, corrosion resistance. English version Aluminium and aluminium alloys Sheet, strip and plate Part 2: Mechanical properties Aluminium et alliages daluminium Tles, bandes et tles paisses Partie 2: Caractristique
14、s mcaniques Aluminium und Aluminiumlegierungen Bnder, Bleche und Platten Teil 2: Mechanische Eigenschaften This European Standard was approved by CEN on 1994-10-26. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Stand
15、ard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French,
16、German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Denmark, Finland, Franc
17、e, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CEN European Committee for Standardization Comit Europen de Normalisation Europisches Komitee fr Normung Central Secretariat: rue de Stassart 36, B-1050 Brussels 199
18、4 Copyright reserved to CEN members Ref. No. EN 485-2:1994 E Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 04 09:00:47 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 485-2:1994 BSI 01-1999 2 Foreword This European Standard has been drawn up by CEN/TC 132, Aluminium and aluminium alloys, whose s
19、ecretariat is held by the Association Franaise de Normalisation (AFNOR). This European Standard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EC Directive(s). Within its programme of work, Tec
20、hnical Committee CEN/TC 132 entrusted CEN/TC 132/WG 7, Sheets, strips and plates, to prepare the following standard: EN 485-2, Aluminium and aluminium alloys Sheets, strips and plates Part 2: Mechanical properties. This standard is part of a set of four standards. The other standards deal with: EN 4
21、85-1, Aluminium and aluminium alloys Sheets, strips and plates Part 1: Conditions for inspection and delivery. EN 485-3, Aluminium and aluminium alloys Sheets, strips and plates Part 3: Tolerances on shape and dimensions for hot-rolled products. EN 485-4, Aluminium and aluminium alloys Sheets, strip
22、s and plates Part 4: Tolerances on shape and dimensions for cold-rolled products. CEN/TC 132 met on 20 and 21 October 1992 in Paris and agreed on the text to be submitted to CEN members for formal vote. The following countries were represented at that meeting: Belgium, Denmark, France, Germany, Ital
23、y, Norway, Spain, Sweden, Switzerland, United Kingdom. The annex A is normative and contains “Rules for rounding”. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 1995, and conflicting natio
24、nal standards shall be withdrawn at the latest by April 1995. According to the CEN/CENELEC Internal Regulations, the following countries are bound to implement this European Standard: Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norwa
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 485 1995
链接地址:https://www.31doc.com/p-3742790.html