BS-EN-477-1999.pdf
《BS-EN-477-1999.pdf》由会员分享,可在线阅读,更多相关《BS-EN-477-1999.pdf(8页珍藏版)》请在三一文库上搜索。
1、| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BRITISH STANDARD BS EN 477:1999 The Europe
2、an Standard EN 477:1995 has the status of a British Standard ICS 83.140.99 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors Determination of the resistance to impact of main profiles by fa
3、lling mass Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 04 09:01:14 GMT+00:00 2006, Uncontrolled Copy, (c) BSI This British Standard, having been prepared under the direction of the Sector Committee for Building and Civil Engineering, was published under the authority of the Standards Committ
4、ee and comes into effect on 15 May 1999 BSI 05-1999 ISBN 0 580 32276 9 BS EN 477:1999 Amendments issued since publication Amd. No.DateText affected National foreword This British Standard is the English language version of EN 477:1995. The UK participation in its preparation was entrusted by Technic
5、al Committee B/538, Doors, windows, shutters, hardware and curtain walling, to Subcommittee B/538/1, Windows, which has the responsibility to: aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for chang
6、e, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this subcommittee can be obtained on request to its secretary. This British Standard forms part of a package of standards on unplastici
7、zed polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors which will not become fully effective until all standards in the package have been published and any superseded standards have been withdrawn. The date of withdrawal for national standards will be agreed within CEN and w
8、ill be notified. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled International Standards Correspondence Index, or by using the Find facility of the BSI St
9、andards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of
10、pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 5 and a back cover. Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 04 09:01:14 GMT+00:00 2006, Uncontrolled Copy, (c) BSI CEN European Committee for Standardization Comite Europe en de Normalisatio
11、n Europa isches Komitee fu r Normung Central Secretariat: rue de Stassart 36, B-1050 Brussels 1995 All rights of reproduction and communication in any form and by any means reserved in all countries to CEN and its members. Ref. No. EN 477:1995 E EUROPEAN STANDARDEN 477 NORME EUROPE ENNE EUROPA ISCHE
12、 NORM May 1995 ICS 83.140; 91.060.50 Descriptors: buildings, windows, non-metallic sections, unplasticized polyvinylchloride, impact tests, shock resistance English version Unplasticized polyvinychloride (PVC-U) profiles for the fabrication of windows and doors Determination of the resistance to imp
13、act of main profiles by falling mass Profile s de polychlorure de vinyle non plastifie (PVC-U) pour la fabrication des fene tres et des portes De termination de la re sistance aux chocs par masse tombante des profile s principaux Profile aus weichmacherfreiem Polyvinylchlorid (PVC-U) zur Herstellung
14、 von Fenstern und Tu ren Bestimmung der Stofestigkeit von Hauptprofilen mittels Fallbolzen This European Standard was approved by CEN on 1995-05-02. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status o
15、f a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A versi
16、on in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Denmark, Finland, France, Germany, Gree
17、ce, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 04 09:01:14 GMT+00:00 2006, Uncontrolled Copy, (c) BSI Page 2 EN 477:1995 BSI 05-1999 Foreword This European Standard was prepare
18、d by the Technical Committee CEN/TC 33, Windows, doors, shutters, building hardware and curtain walling, of which the Secretariat is held by AFNOR. The requirements are incorporated in the product standards concerned. This European Standard will result in one of a series of standards on test methods
19、 which supports a product standard for PVC-U profiles for the fabrication of windows and doors. This European Standard shall be given the status of a national standard either by publication of an identical text or by endorsement, at the latest by November 1995, and conflicting national standards sha
20、ll be withdrawn at the latest by November 1995. According to the CEN/CENELEC Internal Regulations, the following countries are bound to implement this European Standard: Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, S
21、pain, Sweden, Switzerland and the United Kingdom. Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 04 09:01:14 GMT+00:00 2006, Uncontrolled Copy, (c) BSI Page 3 EN 477:1995 BSI 05-1999 1 Scope This European Standard specifies a method for the determination of the resistance to impact by a falling
22、 mass at 210 8C of unplasticized polyvinylchloride (PVC-U) main profiles for the fabrication of windows and doors for the assessment of the extrusion. 2 Principle Test pieces cut from lengths of main profiles are subjected to a blow from a mass falling from a known height on the sight surface at a p
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 477 1999
链接地址:https://www.31doc.com/p-3742800.html