BS-EN-485-1-2008.pdf
《BS-EN-485-1-2008.pdf》由会员分享,可在线阅读,更多相关《BS-EN-485-1-2008.pdf(20页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 485-1:2008 Aluminium and aluminium alloys Sheet, strip and plate Part 1: Technical conditions for inspection and delivery ICS 77.150.10 ? BS EN 485-1:2008 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 May 2008 BSI
2、2008 ISBN 978 0 580 56295 2 National foreword This British Standard is the UK implementation of EN 485-1:2008. It supersedes BS EN 485-1:1994 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee NFE/35, Light metals and their alloys. A list of organization
3、s represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. A
4、mendments/corrigenda issued since publication DateComments EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 485-1 March 2008 ICS 77.150.10Supersedes EN 485-1:1993 English Version Aluminium and aluminium alloys - Sheet, strip and plate - Part 1: Technical conditions for inspection and delivery Al
5、uminium et alliages daluminium - Tles, bandes et tles paisses - Partie 1: Conditions techniques de contrle et de livraison Aluminium und Aluminiumlegierungen - Bnder, Bleche und Platten - Teil 1: Technische Lieferbedingungen This European Standard was approved by CEN on 19 January 2008. CEN members
6、are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application t
7、o the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the s
8、ame status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
9、 Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2008 CENAll rights of exploitation in any form and by any means res
10、erved worldwide for CEN national Members. Ref. No. EN 485-1:2008: E EN 485-1:2008 (E) 2 Contents Page Foreword3 1 Scope 4 2 Normative references4 3 Terms and definitions .5 4 Ordering information.5 5 Requirements.7 6 Test methods8 7 Inspection documents.15 8 Marking of products 15 9 Packaging.15 10
11、Complaints of non conformity16 Bibliography17 BS EN 485-1:2008 EN 485-1:2008 (E) 3 Foreword This document (EN 485-1:2008) has been prepared by Technical Committee CEN/TC 132 “Aluminium and aluminium alloys”, the secretariat of which is held by AFNOR. This European Standard shall be given the status
12、of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2008, and conflicting national standards shall be withdrawn at the latest by September 2008. This document supersedes EN 485-1:1993. Within its programme of work, Technical committee CEN/
13、TC 132 entrusted CEN/TC 132/WG 7 “Sheets, strips and plates“ to revise EN 485-1:1993. EN 485 comprises the following parts under the general title “Aluminium and aluminium alloys Sheet, strip and plate“: Part 1: Technical conditions for inspection and delivery Part 2: Mechanical properties Part 3: T
14、olerances on dimensions and form for hot-rolled products Part 4: Tolerances on shape and dimensions for cold-rolled products Besides very slight additional adjustments in the text and update of normative references, the following technical changes have been made: Clause 1: thickness increased to 400
15、 mm; addition of Clause 6 (previously in EN 485-2); Clause 7 amended; addition of Claude 10; addition of Bibliography. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifyin
16、g any or all such patent rights. CEN/TC 132 affirms it is policy that in the case when a patentee refuses to grant licences on standardised standard products under reasonable and not discriminatory condition, then this product shall be removed from the corresponding document. According to the CEN/CE
17、NELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxe
18、mbourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 485-1:2008 EN 485-1:2008 (E) 4 1 Scope This document specifies the technical conditions for inspection and delivery of wrought aluminium and wrought aluminium a
19、lloy sheet, strip and plate for general engineering applications. It also includes provision for ordering and testing. It applies to products with a thickness over 0,20 mm up to and including 400 mm. It does not directly apply to semi-finished rolled products in coiled form to be subjected to furthe
20、r rolling (reroll stock) or to special applications such as aerospace, can stock, finstock, etc. which are dealt with in separate European Standards. NOTE Most of these specific standards refer for some provisions to the present standard. 2 Normative references The following referenced documents are
21、 indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. prEN 485-2:20081), Aluminium and aluminium alloys Sheet, strip and plate Part 2: Mechan
22、ical properties EN 485-3, Aluminium and aluminium alloys Sheet, strip and plate Part 3: Tolerances on dimensions and form for hot-rolled products EN 485-4, Aluminium and aluminium alloys Sheet, strip and plate Part 4: Tolerances on shape and dimensions for cold-rolled products EN 515, Aluminium and
23、aluminium alloys Wrought products Temper designations EN 573-3, Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products EN 1669, Aluminium and aluminium alloys Test methods Earing test for sheet and strip EN 2004-1, Aeros
24、pace series Test methods for aluminium and aluminium alloy products Part 1: Determination of electrical conductivity of wrought aluminium alloys EN 10002-1, Metallic materials Tensile testing Part 1: Method of test at ambient temperature EN 10204, Metallic products Type of inspection documents EN 12
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 485 2008
链接地址:https://www.31doc.com/p-3742811.html