BS-EN-500-5-1996.pdf
《BS-EN-500-5-1996.pdf》由会员分享,可在线阅读,更多相关《BS-EN-500-5-1996.pdf(10页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 500-5:1996 Mobile road construction machinery Safety Part 5: Specific requirements for joint cutters The European Standard EN 500-5:1995 has the status of a British Standard ICS 91.220 Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 06 09:42:41 GMT+00:00 2006, Uncontrolled
2、 Copy, (c) BSI BS EN 500-5:1996 This British Standard, having been prepared under the direction of the Sector Board for Engineering, was published under the authority of the Standards Board and comes into effect on 15 June 1996 BSI 08-1999 The following BSI references relate to the work on this stan
3、dard: Committee reference B/513/1 Draft for comment 91/14882 DC ISBN 0 580 25396 1 Committees responsible for this British Standard The preparation of this British Standard was entrusted by Technical Committee B/513, Construction equipment and plant, and site safety, to Subcommittee B/513/1, Earth-m
4、oving machinery, upon which the following bodies were represented: British Coal Corporation Construction Plant-hire Association Federation of Civil Engineering Contractors Federation of Manufacturers of Construction Equipment and Cranes Health and Safety Executive Institution of Civil Engineers Sils
5、oe Research Institute Amendments issued since publication Amd. No.DateComments Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 06 09:42:41 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 500-5:1996 BSI 08-1999i Contents Page Committees responsibleInside front cover National forewordii Foreword2
6、 Text of EN 500-53 List of referencesInside back cover Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 06 09:42:41 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 500-5:1996 ii BSI 08-1999 National foreword This British Standard has been prepared by Subcommittee B/513/1 and is the English langu
7、age version of EN 500-5:1995 Mobile road construction machinery Safety Part 5: Specific requirements for joint cutters, published by the European Committee for Standardization (CEN).It is one of a number of British Standards implementing European Standards on machinery safety matters, in the develop
8、ment of which the United Kingdom has played an active part. This British Standard covers the essential safety requirements in the Machinery Directive (89/392/EEC) and the Amending Directive (91/368/EEC). A British Standard does not purport to include all the necessary provisions of a contract. Users
9、 of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Cross-reference Publication referred toCorresponding British Standard BS EN 500 Mobile road construction machinery Safety EN 500-1:1995Pa
10、rt 1:1996 Common requirements Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, the EN title page, pages 2 to 4, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will
11、 be indicated in the amendment table on the inside front cover. Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 06 09:42:41 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 500-5 September 1995 ICS 91.220 Descriptors: Roads, construction, site equip
12、ment, mobile equipment, cutting, joints, safety, specifications, accident prevention, hazards, safety measures, safety devices, signalling English version Mobile road construction machinery Safety Part 5: Specific requirements for joint cutters Machines mobiles pour la construction de routes Scurit
13、Partie 5: Exigences spcifiques pour dcoupeurs de joints Bewegliche Straenbaumaschinen Sicherheit Teil 5: Besondere Anforderungen an Fugenschneider This European Standard was approved by CEN on 1954-06-29. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the c
14、onditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in th
15、ree official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of A
16、ustria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CEN European Committee for Standardization Comit Europen de Normalisation Europisches Komitee fr Normung Central Secretariat:
17、 rue de Stassart 36, B-1050 Brussels 1995 All rights of reproduction and communication in any form and by any means reserved in all countries to CEN and its members. Ref. No. EN 500-5:1995 E Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 06 09:42:41 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN
18、 500-5:1995 BSI 08-1999 2 Foreword This European Standard was prepared by the Technical Committee CEN/TC 151, Construction equipment and building material machines Safety, of which the secretariat is held by DIN. This European Standard has been prepared under a mandate given to CEN by the European C
19、ommission and the European Free Trade Association, and supports essential requirements of EC Directive(s). EN 500 Mobile road construction machinery Safety comprises the following parts: Part 1: Common requirements; Part 2: Specific requirements for road-milling machines; Part 3: Specific requiremen
20、ts for soil stabilization machines; Part 4: Specific requirements for compaction machines; Part 5: Specific requirements for joint cutters; Part 6: Specific requirements for paver-finishers. This European Standard shall be given the status of a national standard, either by publication of an identica
21、l text or by endorsement, at the latest by March 1996, and conflicting national standards shall be withdrawn at the latest by March 1996. In accordance with the CEN/CENELEC Internal Regulations, the following countries are bound to implement this European Standard: Austria, Belgium, Denmark, Finland
22、, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland, United Kingdom. Contents Page Foreword2 0Introduction3 1Scope3 2Normative references3 3Definitions3 4List of hazards3 5Safety requirements3 5.1Lighting3 5.2Design of the machine
23、 in relation to its operation and handling3 5.3Operators station3 5.4Operators seat3 5.5Controls3 5.6Starting3 5.7Stopping3 5.8Danger of falling off, access to operators station and to service points3 5.9Precautions against hazards caused by moving parts3 5.10 Hazards caused by dust emission3 5.11 F
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 500 1996
链接地址:https://www.31doc.com/p-3742831.html