BS-EN-500-6-2006.pdf
《BS-EN-500-6-2006.pdf》由会员分享,可在线阅读,更多相关《BS-EN-500-6-2006.pdf(32页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 500-6:2006 Mobile road construction machinery Safety Part 6: Specific requirements for paver-finishers The European Standard EN 500-6:2006 has the status of a British Standard ICS 91.220 ? Licensed Copy: London South Bank University, London South Bank University, Sun Dec 24 04
2、:58:55 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 500-6:2006 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 November 2006 BSI 2006 ISBN 0 580 49726 7 National foreword This British Standard was published by BSI. It is the UK impleme
3、ntation of EN 500-6:2006. It supersedes DD ENV 500-6:1996, which will be withdrawn on 30 September 2008. The UK participation in its preparation was entrusted by Technical Committee B/513, Construction equipment and plant and site safety, to Subcommittee B/513/1, Earth moving machinery (Internationa
4、l). A list of organizations represented on B/513/1 can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from l
5、egal obligations. Amendments issued since publication Amd. No. DateComments Licensed Copy: London South Bank University, London South Bank University, Sun Dec 24 04:58:55 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 500-6 October 2006 ICS 91.220Supe
6、rsedes ENV 500-6:1995 English Version Mobile road construction machinery - Safety - Part 6: Specific requirements for paver-finishers Machines mobiles pour la construction de routes - Scurit - Partie 6 : Prescriptions spcifiques pour finisseurs Bewegliche Straenbaumaschinen - Sicherheit - Teil 6: Be
7、sondere Anforderungen an Straenfertiger This European Standard was approved by CEN on 17 August 2006. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. U
8、p-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation un
9、der the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, I
10、celand, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue
11、 de Stassart, 36 B-1050 Brussels 2006 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 500-6:2006: E Licensed Copy: London South Bank University, London South Bank University, Sun Dec 24 04:58:55 GMT+00:00 2006, Uncontrolled Copy, (c
12、) BSI EN 500-6:2006 (E) 2 Contents Page Foreword4 Introduction.5 1 Scope 6 2 Normative references6 3 Terms and definitions .6 4 List of significant hazards 7 5 Safety requirements and/or protective measures7 5.1 Lighting, signalling and marking lights and reflex-reflector devices.7 5.2 Operation and
13、 handling 7 5.3 Operators station7 5.4 Operators seat.7 5.5 Controls and indicators 7 5.6 Starting .7 5.7 Stopping .8 5.8 Access systems to operators station and to maintenance points8 5.9 Protection .8 5.10 Pressurised systems.8 5.11 Fire protection8 5.12 Hot surfaces.8 5.13 Signal devices and warn
14、ing signs.8 5.14 Liquid gas units .8 5.15 Electrical and electronic systems9 5.16 Electro-magnetic compatibility (EMC).9 5.17 Noise and vibration9 5.18 Conveyors 9 6 Verification of safety requirements and/or protective measures .9 7 Information for the user 9 7.1 Warning signals and devices .9 7.2
15、Instruction handbook9 7.3 Marking.9 Annex A (normative) Braking systems of rubber-tyred paver-finishers Performance requirements and test procedures 10 Annex B (normative) Noise test code for paver-finishers.12 Annex C (normative) Noise test code for slipform pavers .17 Annex D (informative) Example
16、s of paver-finishers22 Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EC Directive 98/37/EC .27 Bibliography28 Figures Figure B.1 13 Figure B.2 13 Licensed Copy: London South Bank University, London South Bank University, Sun Dec 24 04:58:55 GMT+
17、00:00 2006, Uncontrolled Copy, (c) BSI EN 500-6:2006 (E) 3 Figure B.3 Microphone positions.13 Figure C.1 17 Figure C.2 17 Figure C.3 Microphone positions.18 Figure D.2 Crawler-mounted paver-finisher23 Figure D.3 Pre-compaction screed.23 Figure D.4 Compaction screed with vibration 24 Figure D.5 Compa
18、ction screed with tamper bar.24 Figure D.6 High-compaction screed with tamper bar and vibration.25 Figure D.7 High-compaction screed with tamper bar, vibration and two pressure bars .25 Figure D.8 Slipform paver with offset mould 26 Figure D.9 Slipform paver with road mould 26 Tables Table 17 Table
19、B.1 Settings for simulation to determine noise emission of a paver-finisher while paving15 Table C.1 Settings for simulation to determine noise emission of a slipform paver while paving.19 Licensed Copy: London South Bank University, London South Bank University, Sun Dec 24 04:58:55 GMT+00:00 2006,
20、Uncontrolled Copy, (c) BSI EN 500-6:2006 (E) 4 Foreword This document (EN 500-6:2006) has been prepared by Technical Committee CEN/TC 151 “Construction equip- ment and building material machines Safety”, the secretariat of which is held by DIN. This European Standard shall be given the status of a n
21、ational standard, either by publication of an identical text or by endorsement, at the latest by April 2007, and conflicting national standards shall be withdrawn at the latest by October 2008 This document supersedes ENV 500-6:1995. This document has been prepared under a mandate given to CEN by th
22、e European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. EN 500 ”Mobile road construction machinery Safety” comprises the followi
23、ng parts: Part 1: Common requirements; Part 2: Specific requirements for road-milling machines; Part 3: Specific requirements for soil-stabilising machines and recycling machines; Part 4: Specific requirements for compaction machines; Part 6: Specific requirements for paver-finishers. According to t
24、he CEN/CENELEC Internal Regulations, the national standards organizations of the following coun- tries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Esto- nia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, L
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 500 2006
链接地址:https://www.31doc.com/p-3742833.html