BS-EN-50065-2-2-2003.pdf
《BS-EN-50065-2-2-2003.pdf》由会员分享,可在线阅读,更多相关《BS-EN-50065-2-2-2003.pdf(20页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 50065-2-2:2003 Incorporating Corrigendum No. 1 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz Part 2-2: Immunity requirements for mains communications equipment and systems operating in the range of frequencies 95 kHz to 148,5 kHz
2、and intended for use in industrial environments The European Standard EN 50065-2-2:2003 has the status of a British Standard ICS 33.040.30 ? Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 06 08:39:07 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 50065-2-2:2003 This British Standard was publi
3、shed under the authority of the Standards Policy and Strategy Committee on 11 April 2003 BSI 28 November 2003 ISBN 0 580 41579 1 National foreword This British Standard is the official English language version of EN 50065-2-2:2003, including Corrigendum August 2003. The UK participation in its prepa
4、ration was entrusted to Technical Committee PEL/205, Mains signalling, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications ref
5、erred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary prov
6、isions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation
7、, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 16, an inside back cover and a back cover
8、. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. DateComments 14798 Corrigendum No. 1 28 November 2003 Corrections to Table 2a and Table 2b, item c) Units column Licensed Copy: sheffieldun sheffieldun, na, M
9、on Nov 06 08:39:07 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD EN 50065-2-2 NORME EUROPENNE EUROPISCHE NORM January 2003 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung C
10、entral Secretariat: rue de Stassart 35, B - 1050 Brussels 2003 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 50065-2-2:2003 E ICS 33.040.30 Incorporating corrigendum August 2003 English version Signalling on low-voltage electric
11、al installations in the frequency range 3 kHz to 148,5 kHz Part 2-2: Immunity requirements for mains communications equipment and systems operating in the range of frequencies 95 kHz to 148,5 kHz and intended for use in industrial environments Transmission de signaux sur les rseaux lectriques basse
12、tension dans la bande de frquences de 3 kHz 148,5 kHz Partie 2-1: Exigences dimmunit pour les appareils et les systmes de communication sur le rseau lectrique dans la bande de frquences de 95 kHz 148,5 kHz et destins tre utiliss dans un environnement industriel Signalbertragung auf elektrischen Nied
13、erspannungsnetzen im Frequenzbereich 3 kHz bis 148,5 kHz Teil 2-2: Strfestigkeitsanforderungen an Netz-Datenbertragungsgerte und -systeme die im Frequenzbereich 95 kHz bis 148,5 kHz betrieben werden und fr den Gebrauch im Industriebereich bestimmt sind This European Standard was approved by CENELEC
14、on 2001-12-04. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards m
15、ay be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified t
16、o the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slo
17、vakia, Spain, Sweden, Switzerland and United Kingdom. Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 06 08:39:07 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 50065-2-2:2003 2 Foreword This European Standard was prepared by SC 205A, Mains communicating systems, of Technical Committee CENELEC TC
18、 205, Home and Building Electronic Systems (HBES). The text of the draft was submitted to the Unique Acceptance Procedure and was approved by CENELEC as EN 50065-2-2 on 2001-12-04. The following dates were fixed: - latest date by which the EN has to be implemented at national level by publication of
19、 an identical national standard or by endorsement (dop) 2003-08-01 - latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2004-08-01 This part of this standard defines limits and test methods for the immunity of mains communication equipment and systems (MCE
20、S) operating in the range of frequencies from 95 kHz to 148,5 kHz and intended for use in industrial environments. Immunity requirements for similar equipment intended for operation in residential, commercial and light industrial environments are given in Part 2-1 of this standard. Immunity requirem
21、ents and tests applicable to Electricity Suppliers equipment and systems operating in the band 3 kHz to 95 kHz are given in Part 2-3 of this standard. These tests and limits represent essential electromagnetic compatibility and immunity requirements for the environment according to the scope. They m
22、ay accordingly be applied to MCES according to the Scope of Part 2-3 if lower immunity requirements are sufficient for the considered MCES. Not all known disturbances have been included for testing purposes which have been limited to those disturbances known to be critical for the operation of such
23、equipment including specific MCES disturbances such as conducted narrow band. The immunity requirements have been selected to ensure an adequate level of immunity for MCES in industrial environments. The levels do not however cover extreme cases which may occur in any location but with an extremely
24、low probability of occurrence. NOTE This standard closely follows EN 50082-2, the generic immunity standard for the industrial environment, from which much of the material is taken. However the nature of MCES is such that the performance criteria given in clause 5 of this standard differ from those
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 50065 2003
链接地址:https://www.31doc.com/p-3742862.html