BS-EN-50288-4-1-2001.pdf
《BS-EN-50288-4-1-2001.pdf》由会员分享,可在线阅读,更多相关《BS-EN-50288-4-1-2001.pdf(12页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 50288-4-1:2001 Multi-element metallic cables used in analogue and digital communication and control Part 4-1: Sectional specification for screened cables characterized up to 600 MHz Horizontal and building backbone cables The European Standard EN 50288-4-1:2001 has the status
2、of a British Standard ICS 33.120.20 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 06 08:15:03 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 50288-4-1:2001 This British Standard, having been prepared under the direction o
3、f the Electrotechnical Sector Committee, was published under the authority of the Standards Committee and comes into effect on 15 September 2001 BSI 08-2001 ISBN 0 580 37658 3 National foreword This British Standard is the official English language version of EN 50288-4-1:2001. The UK participation
4、in its preparation was entrusted by Technical Committee EPL/46, Cables, wire and waveguides, RF connectors and accessories for communication and signalling, to Subcommittee EPL/46/1, Communication cables, which has the responsibility to: A list of organizations represented on this subcommittee can b
5、e obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “F
6、ind” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from leg
7、al obligations. aid enquirers to understand the text; present to the responsible European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of page
8、s This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 8, an inside back cover and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. DateComments Licensed Co
9、py: sheffieldun sheffieldun, na, Mon Nov 06 08:15:03 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARDEN 50288-4-1 NORME EUROPENNE EUROPISCHE NORMFebruary 2001 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komit
10、ee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2001 CENELEC -All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 50288-4-1:2001 E ICS 33.120.20 English version Multi-element metallic cables used in an
11、alogue and digital communication and control Part 4-1: Sectional specification for screened cables characterized up to 600 MHz - Horizontal and building backbone cables Cbles mtalliques lments multiples utiliss pour les transmissions et les commandes analogiques et numriques Partie 4-1: Spcification
12、 intermdiaire pour les cbles blinds pour applications jusqu 600 MHz - Cbles horizontaux et verticaux de btiment Mehradrige metallische Daten- und Kontrollkabel fr analoge und digitale bertragung Teil 4-1: Rahmenspezifikation fr geschirmte Kabel bis 600 MHz - Kabel fr den Horizontal- und Steigbereich
13、 This European Standard was approved by CENELEC on 1999-10-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical
14、 references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN
15、ELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Ne
16、therlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 06 08:15:03 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 50288-4-1:2001- 2 - Foreword This European Standard was prepared by SC 46XC, Multicore, Multipair and Quad Data co
17、mmunication cables, of Technical Committee CENELEC TC 46X, Communication cables. The text of the draft was submitted to the Unique Acceptance Procedure and was approved by CENELEC as EN 50288-4-1 on 1999-10-01. The following dates were fixed: -latest date by which the EN has to be implemented at nat
18、ional level by publication of an identical national standard or by endorsement(dop)2001-09-01 -latest date by which national standards conflicting with the EN have to be withdrawn(dow) 2002-10-01 This part 4-1 is to be used in conjunction with EN 50288-1. Licensed Copy: sheffieldun sheffieldun, na,
19、Mon Nov 06 08:15:03 GMT+00:00 2006, Uncontrolled Copy, (c) BSI - 3 -EN 50288-4-1:2001 Contents 1Scope4 2Normative references4 3Definitions 4 4Cable construction 4 4.1Conductor.4 4.2Insulation4 4.3Cabling elements5 4.4Identification of cabling elements .5 4.5Screening of cabling elements .5 4.6Cable
20、make-up.5 4.7Filling compound 5 4.8Interstitial fillers.5 4.9Screening of the cable core5 4.10 Moisture barriers.5 4.11 Wrapping layers .5 4.12 Sheath5 5Tests and requirements for completed cables6 5.1Electrical tests 6 5.2Mechanical tests.8 5.3Environmental tests8 5.4Fire performance tests8 License
21、d Copy: sheffieldun sheffieldun, na, Mon Nov 06 08:15:03 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 50288-4-1:2001- 4 - 1Scope This sectional specification covers screened cables, characterised up to 600 MHz, intended for horizontal floor and building backbone wiring as defined in EN 50173. The e
22、lectrical, mechanical, transmission and environmental performance characteristics of the screened cables, related to their reference test methods, are detailed. This sectional specification is to be read in conjunction with EN 50288-1, the generic specification for multi-element metallic cables used
23、 in analogue and digital communication and control, which contains the essential provisions for its application. 2Normative references This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places
24、 in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referre
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 50288 2001
链接地址:https://www.31doc.com/p-3742981.html