《BS-EN-50260-2-10-2002.pdf》由会员分享,可在线阅读,更多相关《BS-EN-50260-2-10-2002.pdf(14页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 50260-2-10: 2002 Safety of hand-held battery-powered motor-operated tools and battery packs Part 2-10: Particular requirements for reciprocating saws The European Standard EN 50260-2-10:2002 has the status of a British Standard ICS 25.140.20 NO COPYING WITHOUT BSI PERMISSION E
2、XCEPT AS PERMITTED BY COPYRIGHT LAW Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 06 06:52:46 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 50260-2-10:2002 This British Standard, having been prepared under the direction of the Electrotechnical Sector Policy and Strategy Committee, was publi
3、shed under the authority of the Standards Policy and Strategy Committee on 5 July 2002 BSI 5 July 2002 ISBN 0 580 40018 2 National foreword This British Standard is the official English language version of EN 50260-2-10:2002. The UK participation in its preparation was entrusted by Technical Committ
4、ee CPL/61, Safety of household and similar electrical appliances, to Subcommittee CPL/61/6, Portable motor-operated tools, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards whi
5、ch implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publica
6、tion does not purport to include all the necessary provisions of a contract. Users are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible internation
7、al/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title p
8、age, pages 2 to 10, an inside back cover and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. DateComments Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 06 06:52:46 GMT+00:00 2006, Uncontro
9、lled Copy, (c) BSI EUROPEAN STANDARDEN 50260-2-10 NORME EUROPENNE EUROPISCHE NORMMay 2002 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050
10、 Brussels 2002 CENELEC -All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 50260-2-10:2002 E ICS 25.140.20 English version Safety of hand-held battery-powered motor-operated tools and battery packs Part 2-10: Particular requirements for recipr
11、ocating saws Scurit des outils lectroportatifs aliments par batteries et des blocs de batteries Partie 2-10: Rgles particulires pour les scies alternatives Sicherheit fr handgefhrte akkubetriebene Elektrowerkzeuge und Akkublcke Teil 2-10: Besondere Anforderungen fr Stich- und Sbelsgen This European
12、Standard was approved by CENELEC on 2001-01-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references con
13、cerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member int
14、o its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherland
15、s, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 06 06:52:46 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 50260-2-10:2002- 2 - Foreword This European Standard has been prepared by the Technical Committee CENELEC TC 61F, Hand- he
16、ld and transportable electric motor-operated tools. A first draft was submitted to the Unique Acceptance Procedure in August 1996 with positive result. A second draft incorporating the editorial comments received during the UAP and the modifications necessary to incorporate the mechanical requiremen
17、ts which have been agreed for hand-held tools was submitted to the formal vote in September 2000 and was approved by CENELEC as EN 50260-2-10 on 2001-01-01. The following dates were fixed: -latest date by which the EN has to be implemented at national level by publication of an identical national st
18、andard or by endorsement(dop)2003-03-01 -latest date by which the national standards conflicting with the EN have to be withdrawn(dow)2005-03-01 This European Standard is divided into two parts: Part 1: General requirements which are common to most hand-held battery powered motor operated tools (for
19、 the purpose of this European Standard referred to simply as tools). Part 2: Requirements for particular types of tool which either supplement or modify the requirements given in Part 1 to account for the particular hazards and characteristics of these specific tools. This European Standard has been
20、 prepared under a mandate (M/083) given to CEN and CENELEC by the European Commission and the European Free Trade Association and supports the essential safety requirements of the Machinery Directive. Compliance with the clauses of Part 1 of this European Standard together with this Part 2 provides
21、one means of conforming with the specified essential requirements of the Directive concerned. For noise and vibration, this European Standard covers the requirements for their measurement, the provision of information arising from these measurements and the provision of information about the persona
22、l protective equipment required. Specific requirements for the reduction of the risk arising from noise and vibration through design of the tool are not given as this reflects the current state of the art. As with any standard, technical progress will be kept under review so that any developments ca
23、n be taken into account. Warning: Other requirements and other EC Directives can be applicable to the products falling within the scope of this European Standard. Hand held motor-operated tools are covered by the EN 50144 series. In order to be consistent with the EN 50144 series, the same order of
24、clauses has been kept; the missing clauses are considered void. CEN/TC 255 is producing standards for non electrically driven saws (EN 792-12). This European Standard follows the overall requirements of EN 292-1 and EN 292-2. Subclauses, tables and figures which are additional to those in Part 1 are
25、 numbered starting from 101. NOTE In this standard the following print types are used: -Requirements proper; -Test specifications; -Explanatory matter. Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 06 06:52:46 GMT+00:00 2006, Uncontrolled Copy, (c) BSI - 3 -EN 50260-2-10:2002 Contents 1Scope .
26、4 2Definitions.4 3General requirements4 4General conditions for the tests.4 5Rating.4 6(void) 7Marking and information for use 4 8Protection against electric shock .5 9(void) 10(void) 11(void) 12(void) 13Environmental requirements5 14Moisture resistance.5 15Insulation resistance and electric strengt
27、h.5 16(void) 17Abnormal operation.6 18Mechanical hazards6 19Mechanical strength6 20Construction6 21Components .6 22Internal wiring .6 23(void) 24(void) 25(void) 26Screws and connections6 27Creepage distances, clearances and distances through insulation.7 28Resistance to heat, fire and tracking .7 29
28、Resistance to rusting.7 Figures .8 Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 06 06:52:46 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 50260-2-10:2002- 4 - 1Scope This clause of Part 1 is applicable except as follows: Addition This European Standard applies to all types of reciprocating sa
29、ws. This European Standard does not give requirements for the design of the tool to reduce the risks arising from noise and vibration. 2Definitions This clause of Part 1 is applicable. 3General requirements This clause of Part 1 is applicable. 4General conditions for the tests This clause of Part 1
30、is applicable. 5Rating This clause of Part 1 is applicable. 6Void 7Marking and information for use This clause of Part 1 is applicable except as follows: 7.1Addition: Reciprocating saws shall be marked with: -number of reciprocations per minute under no-load conditions. The number of reciprocations
31、under no-load conditions to be determined after the saw has been running idle for 10 min at rated voltage or at the upper limit of the rated voltage range. Reciprocating saws intended to cut wood shall be marked with: -maximum cutting depth in millimetres. 7.8.1Addition: - for reciprocating saws for
32、 woodworking, the advice that, if it is used in confined areas (e.g. indoors), either to use a dust protection or a dust collection equipment; -information on the correct use of the dust collection equipment. Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 06 06:52:46 GMT+00:00 2006, Uncontrolle
33、d Copy, (c) BSI - 5 -EN 50260-2-10:2002 8Protection against electric shock This clause of Part 1 is applicable. 9Void 10Void 11Void 12Void 13Environmental requirements This clause of Part 1 is applicable except as follows: 13.1Void 13.2.2.4 Addition: The guide plate of jigsaws shall be horizontal. 1
34、3.2.2.5 Replacement of paragraphs 3, 4 and 5: Reciprocating saws are tested at no-load. 13.3.6Replacement of paragraph 1: Jig saws are tested under load under the conditions shown in Table 101 with pendulum systems, if any, being set at maximum. Other reciprocating saws are tested at no-load. Table
35、101 - Test conditions OrientationCutting a horizontal piece of chipboard 800 mm x 400 mm x 19 mm supported on resilient material and fixed to a bench Tool bit/cutter/abrasiveNew blade as recommended by the manufacturer for cutting chipboard Feed forceJust sufficient to cut at a brisk pace Test cycle
36、Cutting off approximately 10 mm wide strips across the 400 mm width of the chipboard Paragraph 3 is not applicable. 14Moisture resistance This clause of Part 1 is applicable. 15Insulation resistance and electric strength This clause of Part 1 is applicable. Licensed Copy: sheffieldun sheffieldun, na
37、, Mon Nov 06 06:52:46 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 50260-2-10:2002- 6 - 16Void 17Abnormal operation This clause of Part 1 is applicable. 18Mechanical hazards This clause of Part 1 is applicable except as follows: 18.1Addition: For jig saws, a guard shall be provided to prevent inadv
38、ertent contact with moving parts above the guide plate. Compliance is checked by the following test: The jig saw is set for a right-angled cut. The test probe of Figure 101a is positioned above the guide plate as shown in Figures 101b and 101c. The longitudinal axis of the test probe shall be perpen
39、dicular to the toothed rim of the saw blade. The test probe shall be equally positioned about the central plane of the saw blade. When the test probe is moved towards the saw blade, it shall not be able to touch its toothed rim. 19Mechanical strength This clause of Part 1 is applicable. 20Constructi
40、on This clause of Part 1 is applicable. 21Components This clause of Part 1 is applicable. 22Internal wiring This clause of Part 1 is applicable. 23Void 24Void 25Void 26Screws and connections This clause of Part 1 is applicable. Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 06 06:52:46 GMT+00:0
41、0 2006, Uncontrolled Copy, (c) BSI - 7 -EN 50260-2-10:2002 27Creepage distances, clearances and distances through insulation This clause of Part 1 is applicable. 28Resistance to heat, fire and tracking This clause of Part 1 is applicable. 29Resistance to rusting This clause of Part 1 is applicable.
42、Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 06 06:52:46 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 50260-2-10:2002- 8 - a aTest probe Figure 101a - Details of test probe a b aTest probe bGuide plate NOTE Upper structure of saw, which should prevent the test probe touching the saw blade, o
43、mitted for simplicity. Figure 101b - Side section showing position and direction of movement of test probe Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 06 06:52:46 GMT+00:00 2006, Uncontrolled Copy, (c) BSI - 9 -EN 50260-2-10:2002 a aTest probe NOTE Upper structure of saw omitted for simplici
44、ty. Figure 101c - Plan view of guide plate showing position of test probe Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 06 06:52:46 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 50260-2-10:2002- 10 - Annexes The annexes of Part 1 are applicable. Licensed Copy: sheffieldun sheffieldun, na, Mon
45、Nov 06 06:52:46 GMT+00:00 2006, Uncontrolled Copy, (c) BSI blank Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 06 06:52:46 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 50260-2-10:2002 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national
46、 body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the l
47、atest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of whic
48、h can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and fo
49、reign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards throug
链接地址:https://www.31doc.com/p-3742982.html