BS-EN-50288-2-2-2001.pdf
《BS-EN-50288-2-2-2001.pdf》由会员分享,可在线阅读,更多相关《BS-EN-50288-2-2-2001.pdf(12页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 50288-2-2:2001 Multi-element metallic cables used in analogue and digital communication and control Part 2-2: Sectional specification for screened cables characterized up to 100 MHz Work area and patch cord cables The European Standard EN 50288-2-2:2001 has the status of a Bri
2、tish Standard ICS 33.120.20 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 06 08:15:17 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 50288-2-2:2001 This British Standard, having been prepared under the direction of the El
3、ectrotechnical Sector Committee, was published under the authority of the Standards Committee and comes into effect on 15 September 2001 BSI 08-2001 ISBN 0 580 37660 5 National foreword This British Standard is the official English language version of EN 50288-2-2:2001. It supersedes BS EN 50168:199
4、6 which is withdrawn. The UK participation in its preparation was entrusted by Technical Committee EPL/46, Cables, wire and waveguides, RF connectors and accessories for communication and signalling, to Subcommittee EPL/46/1, Communication cables, which has the responsibility to: A list of organizat
5、ions represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standard
6、s Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard
7、does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and
8、 promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 8, an inside back cover and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since pu
9、blication Amd. No. DateComments Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 06 08:15:17 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARDEN 50288-2-2 NORME EUROPENNE EUROPISCHE NORMFebruary 2001 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Norma
10、lisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2001 CENELEC -All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 50288-2-2:2001 E ICS 33.120.20Supersedes EN
11、50168:1994 English version Multi-element metallic cables used in analogue and digital communication and control Part 2-2: Sectional specification for screened cables characterized up to 100 MHz - Work area and patch cord cables Cbles mtalliques lments multiples utiliss pour les transmissions et les
12、commandes analogiques et numriques Partie 2-2: Spcification intermdiaire pour les cbles blinds pour applications jusqu 100 MHz - Cbles de zone de travail et de brassage Mehradrige metallische Daten- und Kontrollkabel fr analoge und digitale bertragung Teil 2-2: Rahmenspezifikation fr geschirmte Kabe
13、l bis 100 MHz - Gerteanschlukabel und Schaltkabel This European Standard was approved by CENELEC on 1999-10-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any
14、 alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made
15、 by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany
16、, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 06 08:15:17 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 50288-2-2:2001- 2 - Foreword This draft European Standard was pre
17、pared by SC 46XC, Multicore, Multipair and Quad Data communication cables, of Technical Committee CENELEC TC 46X, Communication cables. It is submitted to the Unique Acceptance Procedure. This European Standard supersedes EN 50168:1994. The following dates were fixed: -latest date by which the EN ha
18、s to be implemented at national level by publication of an identical national standard or by endorsement(dop)2001-09-01 -latest date by which national standards conflicting with the EN have to be withdrawn(dow) 2002-10-01 This part 2-2 is to be used in conjunction with EN 50288-1. Licensed Copy: she
19、ffieldun sheffieldun, na, Mon Nov 06 08:15:17 GMT+00:00 2006, Uncontrolled Copy, (c) BSI -3 -EN 50288-2-2:2001 Contents 1Scope4 2Normative references4 3Definitions 4 4Cable construction 4 4.1Conductor.4 4.2Insulation4 4.3Cabling elements5 4.4Identification of cabling elements .5 4.5Screening of cabl
20、ing elements .5 4.6Cable make-up.5 4.7Filling compound 5 4.8Interstitial fillers.5 4.9Screening of the cable core5 4.10 Moisture barriers.5 4.11 Wrapping layers .5 4.12 Sheath5 5Tests and requirements for completed cables6 5.1Electrical tests 6 5.2Mechanical tests.8 5.3Environmental tests8 5.4Fire p
21、erformance tests8 Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 06 08:15:17 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 50288-2-2:2001- 4 - 1Scope This sectional specification covers cables, characterised up to 100 MHz, with an overall screen intended for work area cables to connect a teleco
22、mmunications outlet to the terminal equipment and for patch cord cables to establish connections on a patch panel as defined in EN 50173. Work area cables may also be used as patch cord cables in any distributor of a generic building wiring system to interconnect with equipment or to cross-connect b
23、etween cabling systems. The electrical, mechanical, transmission and environmental performance characteristics of the screened cables, related to their reference test methods, are detailed. This sectional specification is to be read in conjunction with EN 50288-1, the generic specification for multi
24、-element metallic cables used in analogue and digital communication and control, which contains the essential provisions for its application. 2Normative references This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are ci
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 50288 2001
链接地址:https://www.31doc.com/p-3742985.html