BS-EN-573-4-2004.pdf
《BS-EN-573-4-2004.pdf》由会员分享,可在线阅读,更多相关《BS-EN-573-4-2004.pdf(24页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 573-4:2004 Aluminium and aluminium alloys Chemical composition and form of wrought products Part 4: Forms of products The European Standard EN 573-4:2004 has the status of a British Standard ICS 77.150.10; 77.120.10 ? BS EN 573-4:2004 This British Standard was published under
2、the authority of the Standards Policy and Strategy Committee on 26 January 2004 BSI 26 January 2004 ISBN 0 580 43332 3 National foreword This British Standard is the official English language version of EN 573-4:2004. It supersedes BS EN 573-4:1995 which is withdrawn. The UK participation in its pre
3、paration was entrusted by Technical Committee NFE/35, Light metals and their alloys, to Subcommittee NFE/35/5, Wrought aluminium and aluminium alloys, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-referenc
4、es The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British St
5、andards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to t
6、he responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside f
7、ront cover, the EN title page, pages 2 to 20, an inside back cover and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. DateComments -,-,- EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 5
8、73-4 January 2004 ICS 77.150.10; 77.120.10Supersedes EN 573-4:1994 English version Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 4: Forms of products Aluminium et alliages daluminium - Composition chimique et forme des produits corroys - Partie 4: Formes d
9、es produits Aluminium und Aluminiumlegierungen - Chemische Zusammensetzung und Form von Halbzeug - Teil 4: Erzeugnisformen This European Standard was approved by CEN on 4 December 2003. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for givin
10、g this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versio
11、ns (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Cz
12、ech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG M
13、anagement Centre: rue de Stassart, 36 B-1050 Brussels 2004 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 573-4:2004: E EN 573-4:2004 (E) 2 Contents page Foreword3 1Scope 5 2Normative references 5 3Classification5 4Forms of product
14、s .5 Annex A (normative) Guidelines for the registration of new wrought aluminium and aluminium alloys in CEN/TC 132 standards and for the elimination of existing alloys from these standards17 A.1General principles17 A.2Rules for registration of new alloys.17 A.2.1General conditions 17 A.2.2Addition
15、al conditions for “Class A“ alloys .17 A.3Procedure for registration of new alloys.18 A.3.1Proposal of registration of a new alloy18 A.3.2Approval procedure for “Class A“ alloys prior to TC enquiry 18 A.3.3Implementation of new alloys in CEN/TC 132 standards.18 A.4Modification of the rating of an al
16、loy from “Class A“ to “Class B“18 A.5Deletion of alloys from EN 573-3 and EN 573-418 Annex B (informative) European standards specifying mechanical properties for product groups relevant to Tables 1 to 819 Bibliography20 Table 1 Applications and forms of products 1000 series .7 Table 2 Applications
17、and forms of products 2000 series .8 Table 3 Applications and forms of products 3000 series .9 Table 4 Applications and forms of products 4000 series .10 Table 5 Applications and forms of products 5000 series .11 Table 6 Applications and forms of products 6000 series.13 Table 7 Applications and form
18、s of products 7000 series.15 Table 8 Applications and forms of products 8000 series.16 Table B.119 -,-,- EN 573-4:2004 (E) 3 Foreword This document (EN 573-4:2004) has been prepared by Technical Committee CEN /TC 132, “Aluminium and aluminium alloys“, the secretariat of which is held by AFNOR. This
19、European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by July 2004, and conflicting national standards shall be withdrawn at the latest by July 2004. Within its programme of work, Technical Committee CEN/TC 132
20、 has been entrusted to prepare the following standard : EN 573-4, Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 4 : Forms of products. This standard is part of a set of five standards. The other standards deal with : EN 573-1, Aluminium and aluminium alloy
21、s - Chemical composition and form of wrought products Part 1 : Numerical designation system. EN 573-2, Aluminium and aluminium alloys - Chemical composition and form of wrought products Part 2 : Chemical symbol based designation system. EN 573-3, Aluminium and aluminium alloys - Chemical composition
22、 and form of wrought products Part 3 : Chemical composition. EN 573-5, Aluminium and aluminium alloys - Chemical composition and form of wrought products Part 5 : Codification of standardized wrought products. This document supersedes EN 573-4:1994. CEN/TC 132 has decided to revise this standard eve
23、ry two years if necessary. The following technical changes have been introduced during the revision : clause 1 :note modified ; Tables 1 to 8 :columns Rolling ingots and Extrusion ingots deleted ; column Extruded and drawn products split up ; Table 3 :alloys EN AW-3105B and EN AW-3005A added ; Table
24、 4 :alloy EN AW-4014 deleted ; alloys EN AW-4016, EN AW-4017 and EN AW-4018 added ; Table 5 :alloys EN AW-5119A, EN AW-5449, EN AW 5654A, EN AW-5356A, EN AW-5456B EN AW-5556B, EN AW-5183A, EN AW-5383, EN AW- 5186 and EN AW-5187 added ; Table 6 :alloys EN AW-6008 and EN AW-6016 added ; Table 8 :alloy
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 573 2004
链接地址:https://www.31doc.com/p-3743066.html