BS-EN-60034-5-2001.pdf
《BS-EN-60034-5-2001.pdf》由会员分享,可在线阅读,更多相关《BS-EN-60034-5-2001.pdf(24页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 60034-5:2001 IEC 60034-5:2000 Incorporating amendment no. 1 Rotating electrical machines Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) Classification The European Standard EN 60034-5:2001, incorporating amendment A1:200
2、7, has the status of a British Standard ICS 29.160.01 ? BS EN 60034-5:2001 This British Standard, having been prepared under the direction of the Electrotechnical Sector Committee, was published under the authority of the Standards Committee and comes into effect on 15 June 2001 BSI 2007 ISBN 0 580
3、37513 7 National foreword This British Standard was published by BSI. It is the UK implementation of EN 60034-5:2001, incorporating amendment A1:2007. It is identical with IEC 60034-5:2000, incorporating amendment 1:2006. It supersedes BS 4999-105:1988 which is withdrawn. The start and finish of tex
4、t introduced or altered by amendment is indicated in the text by tags !“. Tags indicating changes to IEC text carry the number of the IEC amendment. For example, text altered by IEC amendment 1 is indicated by !“. The UK participation in its preparation was entrusted to Technical Committee PEL/2, Ro
5、tating electrical machinery. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standa
6、rd cannot confer immunity from legal obligations. Amendments issued since publication Amd. No. DateComments 1694128 February 2007See national foreword EUROPEAN STANDARDEN 60034-5 NORME EUROPENNE EUROPISCHE NORM February 2001 CENELEC European Committee for Electrotechnical Standardization Comit Europ
7、en de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2001 CENELEC -All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 60034-5:2001 E ICS 29.160Supersed
8、es EN 60034-5:1986 English version Rotating electrical machines Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification (IEC 60034-5:2000) Machines lectriques tournantes Partie 5: Degrs de protection procurs par la conception intgrale
9、des machines lectriques tournantes (code IP) - Classification (CEI 60034-5:2000) Drehende elektrische Maschinen Teil 5: Schutzarten aufgrund der Gesamtkonstruktion von drehenden elektrischen Maschinen (IP-Code) - Einteilung (IEC 60034-5:2000) This European Standard was approved by CENELEC on 2000-12
10、-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obta
11、ined on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Cent
12、ral Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland an
13、d United Kingdom. January 2007 +A1 Foreword The text of document 2/1098/FDIS, future edition 4 of IEC 60034-5, prepared by IEC TC 2, Rotating machinery, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60034-5 on 2000-12-01. This European Standard supersedes EN 60034-
14、5:1986. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement(dop)2001-09-01 latest date by which the national standards conflicting with the EN have to be withdrawn(dow)2003-12-01 Annexe
15、s designated “normative“ are part of the body of the standard. In this standard, annex ZA is normative. Annex ZA has been added by CENELEC. _ Endorsement notice The text of the International Standard IEC 60034-5:2000 was approved by CENELEC as a European Standard without any modification. _ Page 2 E
16、N 600345:2001 The text of document 2/1378/CDV, future amendment 1 to IEC 60034-5:2000, prepared by IEC TC 2, Rotating machinery, was submitted to the IEC-CENELEC parallel Unique Acceptance Procedure and was approved by CENELEC as amendment A1 to EN 60034-5:2001 on 2006-12-01. The following dates wer
17、e fixed: latest date by which the amendment has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2007-09-01 latest date by which the national standards conflicting with the amendment have to be withdrawn (dow) 2009-12-01 _ Endorsement notic
18、e The text of amendment 1:2006 to the International Standard IEC 60034-5:2000 was approved by CENELEC as an amendment to the European Standard without any modification. _ Foreword to amendment A1 CONTENTS Page Clause 1Scope and object . 4 2Normative references. 4 3Designation 5 3.1Single characteris
19、tic numeral 5 3.2Supplementary letters . 5 3.3Example of designation. 5 4Degrees of protection First characteristic numeral . 6 4.1Indication of degree of protection 6 4.2Compliance to indicated degree of protection 6 4.3External fans 6 4.4Drain holes . 6 5Degrees of protection Second characteristic
20、 numeral. 8 6Marking 9 7General requirements for tests . 9 7.1Adequate clearance 9 8Tests for first characteristic numeral10 9Tests for second characteristic numeral 12 9.1Test conditions 12 9.2Acceptance conditions .14 10Requirements and tests for open weather-protected machines 15 Annex ZA (normat
21、ive) Normative references to international publications with their corresponding European publications 21 Figure 1 Standard test finger 16 Figure 2 Equipment to prove protection against dust .17 Figure 3 Equipment to prove protection against dripping water 18 Figure 4 Equipment to prove protection a
22、gainst spraying and splashing water 19 Figure 5 Hand-held equipment to prove protection against spraying and splashing water.20 Figure 6 Standard nozzle for hose test20 Table 1 Test requirements for guards 6 Table 2 Degrees of protection indicated by the first characteristic numeral . 7 Table 3 Degr
23、ees of protection indicated by the second characteristic numeral 8 Table 4 Test and acceptance conditions for first characteristic numeral10-11 Table 5 Test conditions for second characteristic numeral12-14 Page 3 EN 600345:2001 ROTATING ELECTRICAL MACHINES Part 5: Degrees of protection provided by
24、the integral design of rotating electrical machines (IP code) Classification 1 Scope and object This International Standard applies to the classification of degrees of protection provided by enclosures for rotating electrical machines. It defines the requirements for protective enclosures that are i
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 60034 2001
链接地址:https://www.31doc.com/p-3743096.html