BS-EN-581-3-2007.pdf
《BS-EN-581-3-2007.pdf》由会员分享,可在线阅读,更多相关《BS-EN-581-3-2007.pdf(20页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 581-3:2007 Outdoor furniture Seating and tables for camping, domestic and contract use Part 3: Mechanical safety requirements and test methods for tables The European Standard EN 581-3:2007 has the status of a British Standard ICS 97.140; 97.200.30 ? Licensed Copy: London Sout
2、h Bank University, London South Bank University, Wed May 16 04:20:25 GMT+00:00 2007, Uncontrolled Copy, (c) BSI BS EN 581-3:2007 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 May 2007 BSI 2007 ISBN 978 0 580 50713 7 National foreword Thi
3、s British Standard was published by BSI. It is the UK implementation of EN 581-3:2007. It supersedes BS EN 581-3:1999 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee FW/0, Furniture. A list of organizations represented on this committee can be obtaine
4、d on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. Amendments issued since publication Amd. No. Da
5、teComments Licensed Copy: London South Bank University, London South Bank University, Wed May 16 04:20:25 GMT+00:00 2007, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 581-3 April 2007 ICS 97.140; 97.200.30Supersedes EN 581-3:1999 English Version Outdoor furniture -
6、 Seating and tables for camping, domestic and contract use - Part 3: Mechanical safety requirements and test methods for tables Mobilier dextrieur - Sige et tables usages domestique, collectif et de camping - Partie 3: Exigences et essais de scurit mcanique des tables Auenmbel - Sitzmbel und Tische
7、fr Camping-, Wohn- und Objektbereich - Teil 3: Mechanische Sicherheitsanforderungen und Prfverfahren fr Tische This European Standard was approved by CEN on 15 March 2007. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this Europea
8、n Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English,
9、 French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cy
10、prus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION
11、COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2007 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 581-3:2007: E Licensed Copy: London South Bank University, Lon
12、don South Bank University, Wed May 16 04:20:25 GMT+00:00 2007, Uncontrolled Copy, (c) BSI EN 581-3:2007 (E) 2 Contents Page Foreword3 1 Scope 4 2 Normative references4 3 Terms and definitions .4 4 General test conditions.4 5 Test equipment 5 5.1 General5 5.2 Floor5 5.3 Steel test tube 5 6 Test metho
13、ds and requirements5 6.1 General5 6.2 Stability.5 6.2.1 Stability test under vertical load 5 6.2.2 Tables where the structure is intended to support a parasol.7 6.3 Vertical static load test7 6.3.1 Vertical static load on the table top.7 6.3.2 Vertical static load test on end extensions.9 6.4 Horizo
14、ntal fatigue test.9 6.5 Test sequence and test parameters.13 7 Instruction for use .13 8 Test report14 Annex A (informative) Purchase information (Guidelines).15 Annex B (informative) Significant technical changes in revised edition of this standard 16 Licensed Copy: London South Bank University, Lo
15、ndon South Bank University, Wed May 16 04:20:25 GMT+00:00 2007, Uncontrolled Copy, (c) BSI EN 581-3:2007 (E) 3 Foreword This document (EN 581-3:2007) has been prepared by Technical Committee CEN/TC 207 “Furniture”, the secretariat of which is held by UNI. This European Standard shall be given the st
16、atus of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2007, and conflicting national standards shall be withdrawn at the latest by October 2007. This document supersedes EN 581-3:1999. Informative Annex B provides details of significant t
17、echnical changes between this European Standard and the previous edition. This document consists of following parts with the general title, Outdoor furniture Seating and tables for camping, domestic and contract use: Part 1: General safety requirements Part 2 (ENV): Mechanical safety requirements an
18、d test methods for sampling Part 4: (CEN/TR) Requirements and test methods for durability under the influence of climatic conditions According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austr
19、ia, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. Licensed Copy:
20、 London South Bank University, London South Bank University, Wed May 16 04:20:25 GMT+00:00 2007, Uncontrolled Copy, (c) BSI EN 581-3:2007 (E) 4 1 Scope This European Standard specifies the mechanical safety requirements and test methods for outdoor tables used by adults for camping, domestic and con
21、tract use without regard to materials, design/construction or manufacturing processes. This document does not apply to outdoor furniture for severe contract use where higher requirements may be necessary, nor does it apply to street furniture and furniture permanently fixed to the ground/wall. Annex
22、 A (informative) specifies guidelines for purchase information. Information regarding ageing and degradation caused by light, temperature and moisture has not been included. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated re
23、ferences, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 581-1, Outdoor furniture Seating and tables for camping, domestic and contract use Part 1: General safety requirements EN 1730, Domestic furniture Ta
24、bles Test methods for determination of strength, durability and stability 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 outdoor tables for contract use outdoor tables intended for non-private use in places with public access such as restaur
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 581 2007
链接地址:https://www.31doc.com/p-3743103.html