BS-EN-60073-2002.pdf
《BS-EN-60073-2002.pdf》由会员分享,可在线阅读,更多相关《BS-EN-60073-2002.pdf(36页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 60073:2002 Basic and safety principles for man-machine interface, marking and identification Coding principles for indicators and actuators The European Standard EN 60073:2002 has the status of a British Standard ICS 01.070; 29.020 ? Licensed Copy: sheffieldun sheffieldun, na,
2、 Wed Nov 08 01:58:52 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 60073:2002 This British Standard, having been prepared under the direction of the Electrotechnical Sector Policy and Strategy Committee, was published under the authority of the Standards Policy and Strategy Committee on 6 Septemb
3、er 2002 BSI 6 September 2002 ISBN 0 580 40359 9 National foreword This British Standard is the official English language version of EN 60073:2002. It is identical with IEC 60073:2002. It supersedes BS EN 60073:1997 which is withdrawn. The UK participation in its preparation was entrusted to Technica
4、l Committee GEL/16, Terminal markings and other identifications, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred
5、to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions
6、 of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or p
7、roposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 32, an inside back cover and a back cover. The
8、BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. DateComments Licensed Copy: sheffieldun sheffieldun, na, Wed Nov 08 01:58:52 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARDEN 60073 NORME EUROPENNE EU
9、ROPISCHE NORMJuly 2002 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2002 CENELEC -All rights of exploitation in any form and
10、by any means reserved worldwide for CENELEC members. Ref. No. EN 60073:2002 E ICS 01.070; 29.020Supersedes EN 60073:1996 English version Basic and safety principles for man-machine interface, marking and identification - Coding principles for indicators and actuators (IEC 60073:2002) Principes fonda
11、mentaux et de scurit pour linterface homme-machine, le marquage et lidentification - Principes de codage pour les indicateurs et les organes de commande (CEI 60073:2002) Grund- und Sicherheitsregeln fr die Mensch-Maschine-Schnittstelle, Kennzeichnung - Codierungsgrundstze fr Anzeigengerte und Bedien
12、teile (IEC 60073:2002) This European Standard was approved by CENELEC on 2002-07-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lis
13、ts and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the r
14、esponsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland,
15、 Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom. Licensed Copy: sheffieldun sheffieldun, na, Wed Nov 08 01:58:52 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 60073:2002- 2 - Foreword The text of document 16/402/FDIS, future
16、edition 6 of IEC 60073, prepared by IEC TC 16, Basic and safety principles for man-machine interface, marking and identification, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60073 on 2002-07-01. This European Standard supersedes EN 60073:1996. The following dates
17、 were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement(dop) 2003-04-01 latest date by which the national standards conflicting with the EN have to be withdrawn(dow) 2005-07-01 Annexes designated “normative“
18、are part of the body of the standard. Annexes designated “informative“ are given for information only. In this standard, annexes A and ZA are normative and annexes B and C are informative. Annex ZA has been added by CENELEC. _ Endorsement notice The text of the International Standard IEC 60073:2002
19、was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following note has to be added for the standard indicated: IEC 60204-1NOTEHarmonized as EN 60204-1:1997 (not modified). _ Page 2 EN 60073:2002 Licensed Copy: sheffieldun sheffieldu
20、n, na, Wed Nov 08 01:58:52 GMT+00:00 2006, Uncontrolled Copy, (c) BSI CONTENTS INTRODUCTION. 4 1 Scope 5 2 Normative references 5 3 Definitions 6 4 Coding principles 8 4.1 General . 8 4.2 Visual codes 10 4.2.1 Coding by colours. 10 4.2.2 Coding by shapes and/or position 12 4.2.3 Coding by changing o
21、f characteristics over time . 13 4.3 Acoustic codes . 13 4.4 Tactile codes . 14 5 Application requirements . 15 5.1 Indication modes 15 5.2 Actuation modes 20 5.2.1 Non-illuminated actuators 20 5.2.2 Illuminated actuators . 21 5.2.3 Actuators as a part of pictorial presentation on a video display sc
22、reen 22 Annex A (normative) Special requirements for mechanical indicators 23 Annex B (informative) Example for the application of indication coding (using colours) 24 Annex C (informative) Examples of visual, acoustic and tactile codes 26 Annex ZA (normative) Normative references to international p
23、ublications with their corresponding European publications. 31 Bibliography. 30 Page 3 EN 60073:2002 Licensed Copy: sheffieldun sheffieldun, na, Wed Nov 08 01:58:52 GMT+00:00 2006, Uncontrolled Copy, (c) BSI 67003 IEC:0202 9 INTRODUCTION This basic safety publication is intended for use by technical
24、 committees in the preparation of standards in accordance with the principles laid down in IEC Guide 104 and in ISO/IEC Guide 51. It should be noted that one of the responsibilities of a technical committee is, wherever possible, to include or refer to the requirements of basic safety publications i
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 60073 2002
链接地址:https://www.31doc.com/p-3743135.html