BS-EN-60062-1994.pdf
《BS-EN-60062-1994.pdf》由会员分享,可在线阅读,更多相关《BS-EN-60062-1994.pdf(16页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 60062:1994 IEC 60062:1992 Incorporating Amendments Nos. 1 and 2 Marking codes for resistors and capacitors The European Standard EN 60062:1993, with the incorporation of amendments A1:1997 and A11:2001, has the status of a British Standard ICS 31.040.01; 31.060.01 ? Licensed C
2、opy: sheffieldun sheffieldun, na, Fri Nov 10 17:45:09 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 60062:1994 This British Standard, having been prepared under the direction of the Electronic Components Standards Policy Committee, was published under the authority of the Standards Board and come
3、s into effect on 15 February 1994 BSI 31 January 2003 The following BSI references relate to the work on this standard: Committee reference ECL/4 Special announcement in BSI News December 1993 ISBN 0 580 22918 1 Cooperating organizations The European Committee for Electrotechnical Standardization (C
4、ENELEC), under whose supervision this European Standard was prepared, comprises the national committees of the following countries: AustriaItaly BelgiumLuxembourg DenmarkNetherlands FinlandNorway FrancePortugal GermanySpain GreeceSweden IcelandSwitzerland IrelandUnited Kingdom Amendments issued sinc
5、e publication Amd. No.DateComments 9739December 1997 1423031 January 2003 Indicated by a sideline Licensed Copy: sheffieldun sheffieldun, na, Fri Nov 10 17:45:09 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 60062:1994 BSI 31 January 2003 i Contents Page Cooperating organizationsInside front cove
6、r National forewordii Foreword2 Text of EN 600623 National annex NA (informative) Committees responsible11 National annex NB (informative) Cross-reference11 Licensed Copy: sheffieldun sheffieldun, na, Fri Nov 10 17:45:09 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 60062:1994 ii BSI 31 January 2
7、003 National foreword This British Standard has been prepared under the direction of the Electronic Components Standards Policy Committee and is the English language version of EN 60062:1993, Marking codes for resistors and capacitors, including amendments A1:1997 and A11:2001, published by the Euro
8、pean Committee for Electrotechnical Standardization (CENELEC). It supersedes BS 1852:1975 which is withdrawn. It is identical with IEC 60062:1992, including amendment 1:1995, published by the International Electrotechnical Commission (IEC). Cross-references The British Standards which implement inte
9、rnational or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not pur
10、port to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii,
11、the EN title page, pages 2 to 11 and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Sidelining in this document indicates the most recent changes by amendment. Licensed Copy: sheffieldun sheffieldun, na, Fri Nov 10 17:45:09 GMT+00:00 20
12、06, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 60062 October 1993 + A1 May 1997 + A11 May 2001 UDC 621.316.8-777; 621.319.4-777 Supersedes HD 334 S3:1991 Descriptors: Marking, codes, resistors, capacitors English version Marking codes for resistors and capacitors
13、 (includes amendment A1:1997 and A11:2001) (IEC 62:1992 + A1:1995) Codes pour le marquage des rsistances et des condensateurs (inclut les amendements A1:1997 et A11:2001) (CEI 62:1992 + A1:1995) Kennzeichnung von Widerstnden und Kondensatoren (enthlt nderungen A1:1997 und A11:2001) (IEC 62:1992 + A1
14、:1995) This European Standard was approved by CENELEC on 1993-09-22. Amendment A1 was approved by CENELEC on 1997-03-11 and amendment A11 was approved by CENELEC on 2000-04-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving thi
15、s European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official version
16、s (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Au
17、stria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Ko
18、mitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B-1050 Brussels 1993 Copyright reserved to CENELEC members Ref. No. EN 60062:1993 + A1:1997 + A11:2001 E Licensed Copy: sheffieldun sheffieldun, na, Fri Nov 10 17:45:09 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 60062:199
19、3 BSI 31 January 2003 2 Foreword The CENELEC questionnaire procedure, performed for finding out whether or not the International Standard IEC 62:1992 could be accepted without textual changes, has shown that no common modifications were necessary for the acceptance as European Standard. The referenc
20、e document was submitted to the CENELEC members for formal vote and was approved by CENELEC as EN 60062 on 22 September 1993. This European Standard replaces HD 334 S3:1991. The following dates were fixed: Foreword to amendment A1 The text of amendment 1:1995 to the International Standard IEC 62:199
21、2, prepared by IEC TC 40, Capacitors and resistors for electronic equipment, was submitted to the formal vote and was approved by CENELEC as amendment A1 to EN 60062:1993 on 1997-03-11 without any modification. The following dates were fixed: Foreword to amendment A11 This amendment was prepared by
22、the Technical Committee CENELEC TC 40XA, Capacitors. The text of the draft was submitted to the Unique Acceptance Procedure and was approved by CENELEC as amendment A11 to EN 60062:1993 on 2000-04-01. The following dates were fixed: Contents Page Foreword2 1Scope3 2Colour code for fixed resistors3 3
23、Letter and digit code for resistance and capacitance values5 4Letter code for tolerance on resistance and capacitance values7 5Date code system for capacitors and resistors8 6Code letter (index) for the dielectric material of plastic film and paper capacitors9 Table I Values corresponding to colours
24、3 Table II Examples of code marking for resistance values6 Table III Examples of code marking for capacitance values7 Table IV Letter corresponding to dielectric of plastic film material9 latest date of publication of an identical national standard(dop) 1994-10-01 latest date of withdrawal of confli
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 60062 1994
链接地址:https://www.31doc.com/p-3743142.html