BS-EN-60204-1-1998 IEC-60204-1-1997.pdf
《BS-EN-60204-1-1998 IEC-60204-1-1997.pdf》由会员分享,可在线阅读,更多相关《BS-EN-60204-1-1998 IEC-60204-1-1997.pdf(72页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 60204-1:1998 IEC 60204-1: 1997 Safety of machinery Electrical equipment of machines Part 1: General requirements The European Standard EN 60204-1:1997 has the status of a British Standard ICS 13.110; 29.020; 31.020 Licensed Copy: sheffieldun sheffieldun, na, Thu Nov 09 01:17:2
2、0 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 60204-1:1998 This British Standard, having been prepared under the direction of the Electrotechnical Sector Board, was published under the authority of the Standards Board and comes into effect on 15 November 1998 BSI 05-1999 ISBN 0 580 30668 2 Nati
3、onal foreword This British Standard is the English language version of EN 60204-1:1997. It is identical with IEC 60204-1:1997. This British Standard supersedes BS EN 60204-1:1993 which remains current for use as a reference standard with BS EN 60204-311). The UK participation in its preparation was
4、entrusted to Technical Committee GEL/44, Safety of machinery electrotechnical aspects, which has the responsibility to: aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK inte
5、rests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this committee can be obtained on request to its secretary. From 1 January 1997, all IEC publications have the number 60000 added to the old number. For insta
6、nce, IEC 27-1 has been renumbered as IEC 60027-1. For a period of time during the change over from one numbering system to the other, publications may contain identifiers from both systems. Cross-references Attention is drawn to the fact that CEN and CENELEC standards normally include an annex which
7、 lists normative references to international publications with their corresponding European publications. The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International St
8、andards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Sta
9、ndard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, the EN title page, pages 2 to 66, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have ha
10、d amendments incorporated. This will be indicated in the amendment table on the inside front cover. 1) In preparation. Amendments issued since publication Amd. No.DateComments Licensed Copy: sheffieldun sheffieldun, na, Thu Nov 09 01:17:20 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 60204-1:199
11、8 BSI 05-1999i Contents Page National forewordInside front cover Foreword2 Text of EN 60204-17 Licensed Copy: sheffieldun sheffieldun, na, Thu Nov 09 01:17:20 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ii blank Licensed Copy: sheffieldun sheffieldun, na, Thu Nov 09 01:17:20 GMT+00:00 2006, Uncontrol
12、led Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 60204-1 December 1997 ICS 13.110Supersedes EN 60204-1:1992 and its corrigendum Descriptors: Electrical equipment, machines, control and operation, requirements, testing, definitions, electrical safety requirements English version
13、 Safety of machinery Electrical equipment of machines Part 1: General requirements (IEC 60204-1:1997) Scurit des machines Equipement lectrique des machines Partie 1: Rgles gnrales (CEI 60204-1:1997) Sicherheit von Maschinen Elektrische Ausrstung von Maschinen Teil 1: Allgemeine Anforderungen (IEC 60
14、204-1:1997) This European Standard was approved by CENELEC on 1997-10-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibl
15、iographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibili
16、ty of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Lux
17、embourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B-1050 Brus
18、sels 1997 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 60204-1:1997 E Licensed Copy: sheffieldun sheffieldun, na, Thu Nov 09 01:17:20 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 60204-1:1997 BSI 05-1999 2 Foreword The text of d
19、ocument 44/205/FDIS, future edition 4 of IEC 60204-1, prepared by IEC TC 44, Safety of machinery: Electrotechnical aspects, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60204-1 on 1997-10-01. This standard has been prepared under a mandate given to CEN/CENELEC by
20、the European Commission and the European Free Trade Association and covers essential requirements of the following EC Directives: Low Voltage Directive (73/23/EEC); Machinery Directive (89/392/EEC). This European Standard supersedes EN 60204-1:1992 and its corrigendum December 1993. Significant tech
21、nical differences have resulted from the amendments to the Machinery Safety Directive in 1991 covering mobility and lifting, and in 1993 covering safety components. The following dates were fixed: Annexes designated “normative” are part of the body of the standard. Annexes designated “informative” a
22、re given for information only. In this standard, Annex ZA is normative and Annex A, Annex B, Annex C, Annex D and Annex E are informative. Annex ZA has been added by CENELEC. This standard has the status of a horizontal standard (type B in CEN) and may be used as a reference standard by technical co
23、mmittees in CEN and in CENELEC in the preparation of product family standards or dedicated product standards (type C in CEN as defined in EN 414:1992, 3.1) for machines. The requirements of this standard can also be applied by the supplier of a machine for which no product family or dedicated produc
24、t standard exists. Where a product family or dedicated product standard exists, its requirements take precedence over the requirements of this standard. EN 60204-1 gives a large number of general requirements that may or may not be applicable to the electrical equipment of a particular machine. A si
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS-EN-60204-1-1998 IEC-60204-1-1997 BS EN 60204 1998 IEC 1997
链接地址:https://www.31doc.com/p-3743188.html