BS-EN-60143-2-1995 IEC-60143-2-1994.pdf
《BS-EN-60143-2-1995 IEC-60143-2-1994.pdf》由会员分享,可在线阅读,更多相关《BS-EN-60143-2-1995 IEC-60143-2-1994.pdf(40页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 60143-2:1995 IEC 143-2: 1994 Series capacitors for power systems Part 2: Protective equipment for series capacitor banks The European Standard EN 60143-2:1994 has the status of a British Standard Licensed Copy: sheffieldun sheffieldun, na, Fri Nov 10 16:30:38 GMT+00:00 2006, U
2、ncontrolled Copy, (c) BSI BS EN 60143-2:1995 This British Standard, having been prepared under the direction of the Electrotechnical Sector Board, was published under the authority of the Standards Board and comes into effect on 15 July 1995 BSI 02-2000 The following BSI references relate to the wor
3、k on this standard: Committee reference PEL/33 Draft for comment 92/34251 DC ISBN 0 580 24321 4 Committees responsible for this British Standard The preparation of this British Standard was entrusted to Technical Committee PEL/33, Power capacitors, upon which the following bodies were represented: A
4、ssociation of Consulting Engineers BEAMA Capacitor Manufacturers Association ERA Technology Ltd. Electricity Association Microwave Association Rotating Electrical Machines Association BEAMA Ltd. Amendments issued since publication Amd. No.DateComments Licensed Copy: sheffieldun sheffieldun, na, Fri
5、Nov 10 16:30:38 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 60143-2:1995 BSI 02-2000i Contents Page Committees responsibleInside front cover National forewordii Foreword2 Text of EN 60143-25 List of referencesInside back cover Licensed Copy: sheffieldun sheffieldun, na, Fri Nov 10 16:30:38 GMT+
6、00:00 2006, Uncontrolled Copy, (c) BSI BS EN 60143-2:1995 ii BSI 02-2000 National foreword This British Standard has been prepared by Technical Committee PEL/33 and is the English language version of EN 60143-2:1994 Series capacitors for power systems Part 2: Protective equipment for series capacito
7、r banks, published by the European Committee for Electrotechnical Standardization (CENELEC). It is identical with IEC 143-2:1994, published by the International Electrotechnical Commission (IEC). As a consequence of publishing BS EN 610143-2 it has become necessary to renumber by amendment BS EN 601
8、43 as BS EN 60143-1. Cross-references International StandardCorresponding British Standard IEC 44-4:1980BS 6184:1981 Method for measuring partial discharges in instrument transformers IEC 50(436):1990BS 4727 Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour ter
9、ms Part 2 Terms particular to power engineering Group 14:1991 Power capacitors HD 348 S4:1991 (IEC 56:1987) BS 5311:1988 Specification for high-voltage alternating-current circuit-breakers HD 558.1 S1:1991 (IEC 60-1:1989) BS 923 Guide on high-voltage testing techniques Part 1:1990 General HD 323.2.3
10、0 S3:1988 (IEC 63-2-30:1980) BS 2011 Environmental testing Part 2.1 Db:1981 Test Db and guidance: Damp heat, cyclic (12 + 12 hour cycle) BS EN 60099 Surge arresters EN 60099-1:1994 (IEC 99-1:1991) Part 1:1994 Non-linear resistor type gapped surge arresters for a.c. systems EN 60099-4:1993 (IEC 99-4:
11、1991) Part 4:1993 Metal-oxide surge arresters without gaps for a.c. systems EN 60129:1994 (IEC 129:1984) BS EN 60129:1994 Specification for alternating current disconnectors and earthing switches EN 60143:1993 (IEC 143:1992) BS EN 60143:1993 Series capacitors for power systems HD 553 S2:1993 (IEC 18
12、5:1987) BS 7626:1993 Specification for current transformers HD 554 S1:1992 (IEC 186:1987) BS 7625:1993 Specification for voltage transformers EN 60255-6:1994 (IEC 255-6:1988) BS EN 60255 Electrical relays Part 6:1995 Measuring relays and protection equipment BS EN 60289:1994 (IEC 289:1988) BS EN 602
13、89:1995 Reactors IEC 595:1977BS 7633:1993 Internal fuses for series capacitors BS 5967 Operating conditions for industrial-process measurements and control equipment HD 413 S2:1994 (IEC 654-2:1979) Part 2:1980 Specification for power HD 413.3.S1:1987 (IEC 654-3:1983) Part 3:1984 Methods for assessin
14、g degree of immunity of systems or parts of systems when subjected to mechanical influences IEC 654-4:1987Part 4:1988 Classification of corrosive erosive environmental conditions HD 448 S2:1984 (IEC 694:1980) BS 6581:1985 Specification for common requirements for high-voltage switchgear and controlg
15、ear standards Licensed Copy: sheffieldun sheffieldun, na, Fri Nov 10 16:30:38 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 60143-2:1995 BSI 02-2000iii A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their c
16、orrect application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i to iv, the EN title page, pages 2 to 32, an inside back cover and a back cover. This standard has b
17、een updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover. Licensed Copy: sheffieldun sheffieldun, na, Fri Nov 10 16:30:38 GMT+00:00 2006, Uncontrolled Copy, (c) BSI iv blank Licensed Copy: sheffieldun sheffield
18、un, na, Fri Nov 10 16:30:38 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 60143-2 September 1994 ICS 31.060.00 Descriptors: Electronic-components, capacitors, power capacitors, capacitor banks, safety devices, overload protection, isolating switches,
19、 spark gaps, damping, current transformers, potential transformers, classifications, quality, tests English version Series capacitors for power systems Part 2: Protective equipment for series capacitor banks (IEC 143-2:1994) Condensateurs srie destins tre installs sur des rseaux Partie 2: Matriel de
20、 protection pour les batteries de condensateurs srie (CEI 143-2:1994) Reihenkondensatoren fr Starkstromanlagen Teil 2: Schutzeinrichtungen fr Reihenkondensatorbatterien (IEC 143-2:1994) This European Standard was approved by CENELEC on 1994-07-05. CENELEC members are bound to comply with the CEN/CEN
21、ELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any
22、CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versi
23、ons. CENELEC members are the national electrotechnical committees of Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CENELEC European Committee for Electrotechnical Standar
24、dization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B-1050 Brussels 1994 Copyright reserved to CENELEC members Ref. No. EN 60143-2:1994 E Licensed Copy: sheffieldun sheffieldun, na, Fri Nov 10 16:30:38 GMT
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS-EN-60143-2-1995 IEC-60143-2-1994 BS EN 60143 1995 IEC 1994
链接地址:https://www.31doc.com/p-3743196.html