BS-EN-60254-1-1997 IEC-60254-1-1997.pdf
《BS-EN-60254-1-1997 IEC-60254-1-1997.pdf》由会员分享,可在线阅读,更多相关《BS-EN-60254-1-1997 IEC-60254-1-1997.pdf(16页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 60254-1:1997 IEC 60254-1: 1997 Lead-acid traction batteries Part 1: General requirements and methods of test The European Standard EN 60254-1:1997 has the status of a British Standard ICS 29.220.20 Licensed Copy: sheffieldun sheffieldun, na, Fri Nov 10 13:39:27 GMT+00:00 2006,
2、 Uncontrolled Copy, (c) BSI BS EN 60254-1:1997 This British Standard, having been prepared under the direction of the Eletrotechnical Sector Board, was published under the authority of the Standards Board and comes into effect on 15 July 1997 BSI 02-1999 ISBN 0 580 27719 4 National foreword This Bri
3、tish Standard is the English language version of EN 60254-1:1997. It is identical with IEC 60254-1:1997. It supersedes BS 2550:1983 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee PEL/21, Secondary cells and batteries, which has the responsibility to:
4、 aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organi
5、zations represented on this committee can be obtained on request to its secretary. Cross-references Attention is drawn to the fact that Annex ZA lists normative references to international publications with their corresponding European publications. The British Standards which implement these Intern
6、ational or European publications may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions
7、of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, the EN title page, pag
8、es 2 to 10 and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover. Amendments issued since publication Amd. No.DateComments Licensed Copy: sheffieldun sheffieldun, na, Fri
9、 Nov 10 13:39:27 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 60254-1:1997 BSI 02-1999i Contents Page National forewordInside front cover Foreword2 Text of EN 60254-13 Licensed Copy: sheffieldun sheffieldun, na, Fri Nov 10 13:39:27 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ii blank Licensed Cop
10、y: sheffieldun sheffieldun, na, Fri Nov 10 13:39:27 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 60254-1 April 1997 ICS 29.220.20Supersedes HD 465.1 S1:1986 Descriptors: Lead-acid traction batteries, general requirements, methods of test English ver
11、sion Lead-acid traction batteries Part 1: General requirements and methods of test (IEC 60254-1:1997) Batteries de traction au plomb Partie 1: Prescriptions gnrales et mthodes dessai (CEI 60254-1:1997) Blei-Antriebsbatterien Teil 1: Allgemeine Anforderungen und Prfungen (IEC 60254-1:1997) This Europ
12、ean Standard was approved by CENELEC on 1997-03-11. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
13、 concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member
14、 into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal
15、, Spain, Sweden, Switzerland and United Kingdom. CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B-1050 Brussels 1997 CENELEC All rights of exploi
16、tation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 60254-1:1997 E Licensed Copy: sheffieldun sheffieldun, na, Fri Nov 10 13:39:27 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 60254-1:1997 BSI 02-1999 2 Foreword The text of document 21/405/FDIS, future edition 3
17、of IEC 60254-1, prepared by IEC TC 21, Secondary cells and batteries, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60254-1 on 1997-03-11. This European Standard supersedes HD 465.1 S1:1986. The following dates were fixed: Annexes designated “normative” are part of
18、 the body of the standard. In this standard, Annex ZA is normative. Annex ZA has been added by CENELEC. Endorsement notice The text of the International Standard IEC 60254-1:1997 was approved by CENELEC as a European Standard without any modification. Contents Page Foreword2 1General3 1.1Scope and o
19、bject3 1.2Normative references3 2Functional characteristics3 2.1Capacity3 2.2Charge retention3 2.3High-rate discharge performance3 2.4Cyclic endurance3 3General test conditions3 3.1Accuracy of measuring instruments3 3.2Preparation and maintenance of the test cells or batteries4 3.3Definition of a fu
20、lly charged cell or battery4 4Testing procedures4 4.1Sequence of performance of the tests4 4.2Capacity test5 4.3Charge retention test5 4.4High-rate discharge performance test5 4.5Cyclic endurance test6 5Specific values6 5.1Energy density6 6Testing procedures for light road vehicle traction batteries
21、6 6.11 h capacity6 6.2Dynamic discharge performance7 6.3Dynamic endurance8 Annex ZA (normative) Normative references to international publications with their corresponding European publications10 Figure 1 Dynamic capacity test Current/battery voltage versus discharge time9 Table 16 latest date by wh
22、ich the EN has to be implemented at national level by publication of an identical national standard or by endorsement(dop) 1997-12-01 latest date by which the national standards conflicting with the EN have to be withdrawn(dow) 1997-12-01 Licensed Copy: sheffieldun sheffieldun, na, Fri Nov 10 13:39:
23、27 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 60254-1:1997 BSI 02-19993 1 General 1.1 Scope and object This part of IEC 60254 is applicable to lead-acid traction batteries used as power sources for electric propulsion. Clauses 1 to 5 are applicable to all traction battery applications which inclu
24、de road vehicles, locomotives, industrial trucks and mechanical handling equipments. Clause 6 offers a series of tests which may be used specifically to test batteries developed for use in vehicles such as light passenger vehicles, motor cycles, light commercial vehicles, etc. The object of this sta
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS-EN-60254-1-1997 IEC-60254-1-1997 BS EN 60254 1997 IEC
链接地址:https://www.31doc.com/p-3743197.html