BS-EN-60137-1996 IEC-60137-1995.pdf
《BS-EN-60137-1996 IEC-60137-1995.pdf》由会员分享,可在线阅读,更多相关《BS-EN-60137-1996 IEC-60137-1995.pdf(44页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 60137:1996 IEC 137:1995 Insulated bushings for alternating voltages above 1 kV The European Standard EN 60137:1996 has the status of a British Standard ICS 29.080.20 Licensed Copy: sheffieldun sheffieldun, na, Thu Nov 09 15:17:41 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS E
2、N 60137:1996 This British Standard, having been prepared under the direction of the Electrotechnical Sector Board, was published under the authority of the Standards Board and comes into effect on 15 July 1996 BSI 04-1999 The following BSI references relate to the work on this standard: Committee re
3、ference PEL/36/1 Draft for comment 92/28645 DC ISBN 0 580 25913 7 Committees responsible for this British Standard The preparation of this British Standard was entrusted by Technical Committee PEL/36, Insulators for power systems, to Subcommittee PEL/36/1, Bushing insulators, upon which the followin
4、g bodies were represented: Association of Consulting Engineers British Cable Makers Confederation British Industrial Ceramic Manufacturers Association Electrical and Electronic Insulation Association (BEAMA Ltd). Electrical Installation Equipment Manufacturers Association (BEAMA Ltd.) Electricity As
5、sociation Transmission and Distribution Association (BEAMA Ltd.) Amendments issued since publication Amd. No.DateComments Licensed Copy: sheffieldun sheffieldun, na, Thu Nov 09 15:17:41 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 60137:1996 BSI 04-1999i Contents Page Committees responsibleInsid
6、e front cover National forewordii Foreword2 Text of EN 601375 List of referencesInside back cover Licensed Copy: sheffieldun sheffieldun, na, Thu Nov 09 15:17:41 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 60137:1996 ii BSI 04-1999 National foreword This British Standard has been prepared by Su
7、bcommittee PEL/36/1 and is the English language version of EN 60137, Insulated bushings for alternating voltages above 1 kV, published by the European Committee for Electrotechnical Standardization (CENELEC). It is identical with IEC 137:1995 published by the International Electrotechnical Commissio
8、n (IEC). The foreword of the EN makes reference to the “date of withdrawal”, dow, of the relevant national standard. In this case the relevant national standard is BS 223 which will be withdrawn on 1996-09-01. Cross-references Publication referred toCorresponding British Standard HD 472 S1:1989 (IEC
9、 38:1983) BS 7697:1993 Nominal voltages for low voltage public electricity supply systems BS 4727 Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms Part 1 Terms common to power, telecommunications and electronics IEC 50(212):1990 IEC 50(471):1984 Group 10
10、:1991 Insulating solids, liquids and gases Group 12:1991 Insulators HD 588.1 S1:1991 (IEC 60-1:1989) BS 923 Guide on high-voltage testing techniques Part 1:1990 General EN 60068-2-17:1994 (IEC 68-2-17:1994) BS EN 60068 Environmental testing BS EN 60068-2-17:1995 Test methods. Test Q. Sealing EN 6007
11、1-1:1995 (IEC 71-1:1993) BS EN 60071 Insulation coordination Part 1:1996 Definitions, principles and rules HD 398.5 S1:1983 (IEC 76-5:1976) BS 171 Power transformers Part 5:1978 Specification for ability to withstand short circuit HD 611.2 S1:1992 (IEC 216-6:1990) BS 5691 Guide for the determination
12、 of thermal endurance properties of electrical insulating materials Part 2:1995 Choice of test criteria HD 329 S1:1977 (IEC 233:1974) BS 4963:1973 Specification for tests on hollow insulators for use in high voltage electrical equipment IEC 270:1981 IEC 354:1991 BS 4828:1985 Guide for partial discha
13、rge measurements BS 7735:1994 Guide to loading of oil-immersed power transformers EN 60507:1993 (IEC 507:1991) BS EN 60507:1993 Artificial pollution tests on high-voltage insulators to be used on a.c. systems EN 60517:1996 (IEC 517:1990) BS EN 60517:1996 Gas-insulated metal-enclosed switchgear for r
14、ated voltages of 72,5 kV and above IEC 943:1989PD 6524:1989 Guide to specifying permissible temperature and temperature rise for parts of electrical equipment, in particular for terminals IEC 1263:1994BS 7515:1995 Radiation protection instrumentation. Portable potential alpha meter for rapid measure
15、ments in mines Licensed Copy: sheffieldun sheffieldun, na, Thu Nov 09 15:17:41 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 60137:1996 BSI 04-1999 iii A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their c
16、orrect application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i to iv, the EN title page, pages 2 to 36, an inside back cover and a back cover. This standard has b
17、een updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover. Licensed Copy: sheffieldun sheffieldun, na, Thu Nov 09 15:17:41 GMT+00:00 2006, Uncontrolled Copy, (c) BSI iv blank Licensed Copy: sheffieldun sheffield
18、un, na, Thu Nov 09 15:17:41 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 60137 January 1996 ICS 29.080.20 Descriptors: Bushings, transformers, ceramic, glass, inorganic materials, resin, composite insulation English version Insulated bushings for al
19、ternating voltages above 1 kV (IEC 137:1995) Traverses isoles pour tensions alternatives suprieures 1 kV (CEI 137:1995) Isolierte Durchfhrungen fr Wechselspannungen ber 1 kV (IEC 137:1995) This European Standard was approved by CENELEC on 1995-11-28. CENELEC members are bound to comply with the CEN/
20、CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to a
21、ny CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official ve
22、rsions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CENELEC European Committee for Electrotechnical Stan
23、dardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B-1050 Brussels 1996 Copyright reserved to CENELEC members Ref. No. EN 60137:1996 E Licensed Copy: sheffieldun sheffieldun, na, Thu Nov 09 15:17:41 GM
24、T+00:00 2006, Uncontrolled Copy, (c) BSI EN 60137:1996 BSI 04-1999 2 Foreword The text of document 36A/45/FDIS, future edition 4 of IEC 137, prepared by SC 36A, Insulated bushings, of IEC TC 36, Insulators, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60137 on 199
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS-EN-60137-1996 IEC-60137-1995 BS EN 60137 1996 IEC 1995
链接地址:https://www.31doc.com/p-3743198.html