BS-EN-60216-2-2005.pdf
《BS-EN-60216-2-2005.pdf》由会员分享,可在线阅读,更多相关《BS-EN-60216-2-2005.pdf(20页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 60216-2:2005 Electrical insulating materials Thermal endurance properties Part 2: Determination of thermal endurance properties of electrical insulating materials Choice of test criteria The European Standard EN 60216-2:2005 has the status of a British Standard ICS 17.220.99;
2、29.035.01 ? BS EN 60216-2:2005 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 2 December 2005 BSI 2 December 2005 ISBN 0 580 47277 9 National foreword This British Standard is the official English language version of EN 60216-2:2005. It is i
3、dentical with IEC 60216-2:2005. It supersedes BS 5691-2:1995 which is withdrawn. The UK participation in its preparation was entrusted by Technical Committee GEL/15, Insulating material, to Subcommittee GEL/15/5, Methods of test, which has the responsibility to: A list of organizations represented o
4、n this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or
5、by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immu
6、nity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep UK interests informed; monitor related international and European developments and promulgate them in
7、the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 16, an inside back cover and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No.
8、DateComments EUROPEAN STANDARD EN 60216-2 NORME EUROPENNE EUROPISCHE NORM October 2005 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Br
9、ussels 2005 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 60216-2:2005 E ICS 17.220.99; 29.035.01 Supersedes HD 611.2 S1:1992 English version Electrical insulating materials Thermal endurance properties Part 2: Determination of
10、thermal endurance properties of electrical insulating materials Choice of test criteria (IEC 60216-2:2005) Matriaux isolants lectriques Proprits dendurance thermique Partie 2: Dtermination des proprits dendurance thermique de matriaux isolants lectriques Choix de critres dessai (CEI 60216-2:2005) El
11、ektroisolierstoffe Eigenschaften hinsichtlich des thermischen Langzeitverhaltens Teil 2: Leitfaden zur Bestimmung thermischer Langzeiteigenschaften von Elektroisolierstoffen Auswahl der Prfmerkmale (IEC 60216-2:2005) This European Standard was approved by CENELEC on 2005-08-01. CENELEC members are b
12、ound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the
13、 Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the sa
14、me status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portu
15、gal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. 2 Foreword The text of document 15E/257/FDIS, future edition 4 of IEC 60216-2, prepared by SC 15E*, Methods of test, of IEC TC 15, Insulating materials, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC
16、as EN 60216-2 on 2005-08-01. This European Standard supersedes HD 611.2 S1:1992. The main changes from HD 611.2 S1 are as follows: editorial; Table 1 has been actualized essentially by Part 3 sheets of IEC/SC 15C publications. The following dates were fixed: latest date by which the EN has to be imp
17、lemented at national level by publication of an identical national standard or by endorsement (dop) 2006-05-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2008-08-01 Annex ZA has been added by CENELEC. _ Endorsement notice The text of the Internatio
18、nal Standard IEC 60216-2:2005 was approved by CENELEC as a European Standard without any modification. _ * Subcommittee 15E has been merged with technical committee 98 into the new technical committee 112. EN 60216-2:2005 3 CONTENTS FOREWORD.2 1 Scope 5 2 Normative references .5 3 General considerat
19、ions.7 4 Guide for the choice of properties and end-points7 Annex A (informative) Additional Information on the group to which new or unknown materials should be assigned .11 Annex ZA (normative) Normative references to international publications with their corresponding European publications 14 EN
20、60216-2:2005 4 4 The text of this standard is based on the following documents: FDIS Report on voting 15E/257/FDIS 15E/259/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in acco
21、rdance with the ISO/IEC Directives, Part 2. IEC 60216: Electrical insulating materials Properties of thermal endurance, consists of six parts: Part 1: Ageing procedures and evaluation of test results Part 2: Choice of test criteria Part 3: Instructions for calculating thermal endurance characteristi
22、cs Part 4-1: Ageing ovens Section 1: Single-chamber ovens Part 4-2: Ageing ovens Precision ovens for use up to 300 C Part 4-3: Ageing ovens Multi-chamber ovens Part 5: Determination of relative thermal endurance index (RTE) of an insulating material Part 6: Determination of thermal endurance indices
23、 (TI and RTE) of an insulating material using the fixed time frame method NOTE This work may be continued. For revisions and new parts, see the current catalogue of IEC publications for an up-to-date list. The committee has decided that the contents of this publication will remain unchanged until th
24、e maintenance result date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed; withdrawn; replaced by a revised edition, or amended. EN 60216-2:2005 5 ELECTRICAL INSULATING MATERIALS THERMAL EN
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 60216 2005
链接地址:https://www.31doc.com/p-3743221.html