BS-EN-60265-1-1998 IEC-60265-1-1998.pdf
《BS-EN-60265-1-1998 IEC-60265-1-1998.pdf》由会员分享,可在线阅读,更多相关《BS-EN-60265-1-1998 IEC-60265-1-1998.pdf(44页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 60265-1:1998 IEC 60265-1: 1998 High-voltage switches Part 1: Switches for rated voltages above 1 kV and less than 52 kV The European Standard EN 60265-1:1998 has the status of a British Standard ICS 29.120.60 Licensed Copy: sheffieldun sheffieldun, na, Fri Nov 10 07:50:19 GMT+
2、00:00 2006, Uncontrolled Copy, (c) BSI BS EN 60265-1:1998 This British Standard, having been prepared under the direction of the Electrotechnical Sector Board, was published under the authority of the Standards Board and comes into effect on 15 June 1998 BSI 05-1999 ISBN 0 580 30022 6 National forew
3、ord This British Standard is the English language version of EN 60265-1:1998. It is identical with IEC 60265-1:1998. It supersedes BS 5463-1:1991 which is withdrawn. The UK participation in its preparation was entrusted by Technical Committee PEL/17, Switchgear, controlgear, and HV-LV co-ordination,
4、 to Subcommittee PEL/17/1, High voltage switchgear and controlgear, which has the responsibility to: aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; mon
5、itor related international and European developments and promulgate them in the UK. A list of organizations represented on this subcommittee can be obtained on request to its secretary. From 1 January 1997, all IEC publications have the number 60000 added to the old number. For instance, IEC 27-1 ha
6、s been renumbered as IEC 60027-1. For a period of time during the change over from one numbering system to the other, publications may contain identifiers from both systems. Cross-references Attention is drawn to the fact that CEN and CENELEC Standards normally include an annex which lists normative
7、 references to international publications with their corresponding European publications. The British Standards which implement these international or European publications may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by us
8、ing the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunit
9、y from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, the EN title page, pages 2 to 38, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be
10、 indicated in the amendment table on the inside front cover. Amendments issued since publication Amd. No.DateComments Licensed Copy: sheffieldun sheffieldun, na, Fri Nov 10 07:50:19 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 60265-1:1998 BSI 05-1999i Contents Page National forewordInside front
11、 cover Foreword2 Text of EN 60265-15 Licensed Copy: sheffieldun sheffieldun, na, Fri Nov 10 07:50:19 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ii blank Licensed Copy: sheffieldun sheffieldun, na, Fri Nov 10 07:50:19 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPI
12、SCHE NORM EN 60265-1 April 1998 ICS 29.120.40Supersedes HD 355.1 S3:1995 Descriptors: Switches, high voltage, tests, characteristics English version High-voltage switches Part 1: Switches for rated voltages above 1 kV and less than 52 kV (IEC 60265-1:1998) Interrupteurs haute tension Partie 1: Inter
13、rupteurs pour tensions assignes suprieures 1 kV et infrieures 52 kV (CEI 60265-1:1998) Hochspannungs-Lastschalter Teil 1: Hochspannungs-Lastschalter fr Nennspannungen ber 1 kV und unter 52 kV (IEC 60265-1:1998) This European Standard was approved by CENELEC on 1998-04-01. CENELEC members are bound t
14、o comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Centr
15、al Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same sta
16、tus as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CENELEC Europe
17、an Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B-1050 Brussels 1998 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENE
18、LEC members. Ref. No. EN 60265-1:1998 E Licensed Copy: sheffieldun sheffieldun, na, Fri Nov 10 07:50:19 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 60265-1:1998 BSI 05-1999 2 Foreword The text of document 17A/512/FDIS, future edition 3 of IEC 60265-1, prepared by SC 17A, High-voltage switchgear an
19、d controlgear, of IEC TC 17, Switchgear and controlgear, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60265-1 on 1998-04-01. This European Standard supersedes HD 355.1 S3:1995. The following dates were fixed: This standard refers to EN 60694:1996, which is applica
20、ble unless otherwise specified in this standard. In order to simplify the indication of corresponding requirements, the same numbering of clauses and subclauses is used as in EN 60694. Amendments to these clauses and subclauses are given under the same references whilst additional subclauses are num
21、bered from 101. Annexes designated “normative” are part of the body of the standard. In this standard, Annex ZA is normative. Annex ZA has been added by CENELEC. Endorsement notice The text of the International Standard IEC 60265-1:1998 was approved by CENELEC as a European Standard without any modi
22、fication. Contents Page Foreword2 1General5 1.1Scope5 1.2Normative references5 1.101General requirements5 2Normal and special service conditions6 3Definitions6 3.1General terms6 3.2Assemblies6 3.3Parts of assemblies6 3.4Switching devices6 3.5Parts of switching devices7 3.6Operation7 3.7Characteristi
23、c quantities7 3.8Index of definitions8 4Ratings8 4.1Rated voltage (Ur)8 4.2Rated insulation level8 4.3Rated frequency (fr)8 4.4Rated normal current (lr) and temperature rise8 4.5Rated short-time withstand current (lk)8 4.6Rated peak withstand current (lp)8 4.7Rated duration of short-circuit (tk)8 4.
24、8Rated supply voltage of closing and opening devices and of auxiliary and control circuits (Ua)8 4.9Rated supply frequency of closing and opening devices and of auxiliary circuits9 4.10Rated pressure of compressed gas supply for operation and/or interruption9 4.101Rated mainly active load-breaking c
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS-EN-60265-1-1998 IEC-60265-1-1998 BS EN 60265 1998 IEC
链接地址:https://www.31doc.com/p-3743225.html