BS-EN-60317-0-2-1998 IEC-60317-0-2-1997.pdf
《BS-EN-60317-0-2-1998 IEC-60317-0-2-1997.pdf》由会员分享,可在线阅读,更多相关《BS-EN-60317-0-2-1998 IEC-60317-0-2-1997.pdf(24页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 60317-0-2:1998 IEC 60317-0-2:1997 Incorporating Amendments Nos. 1 and 2 Specifications for particular types of winding wires Part 0-2: General requirements Enamelled rectangular copper The European Standard EN 60317-0-2:1998, with the incorporation of amendments A1:2000 and A2
2、:2005 has the status of a British Standard ICS 29.060.10 ? Licensed Copy: sheffieldun sheffieldun, na, Fri Nov 10 07:38:12 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 60317-0-2:1998 This British Standard, having been prepared under the direction of the Electrotechnical Sector Board, was publish
3、ed under the authority of the Standards Board and comes into effect on 15 September 1998 BSI 2006 ISBN 0 580 30460 4 National foreword This British Standard is the English language version of EN 60317-0-2:1998, including amendments A1:2000 and A2:2005. It is identical with IEC 60317-0-2:1997, includ
4、ing amendments 1:1999 and 2:2005. It supersedes BS EN 60317-0-2:1996 which is withdrawn. The start and finish of text introduced or altered by amendment is indicated in the text by tags !“. Tags indicating changes to IEC text carry the number of the IEC amendment. For example, text altered by IEC am
5、endment 1 is indicated in the text by !“. The UK participation in its preparation was entrusted to Technical Committee GEL/55, Winding wires, which has the responsibility to: aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interp
6、retation, or proposals for change, and keep UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references Attention is drawn to the fact
7、 that CEN and CENELEC Standards normally include an annex which lists normative references to international publications with their corresponding European publications. The British Standards which implement these international or European publications may be found in the BSI Standards Catalogue unde
8、r the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct ap
9、plication. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 21 and a back cover. The copyright notice displayed in this document indicates when th
10、e document was last issued. Amendments issued since publication Amd. No.DateComments 10911April 2001See national foreword 1571730 June 2006See national foreword Licensed Copy: sheffieldun sheffieldun, na, Fri Nov 10 07:38:12 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENN
11、E EUROPISCHE NORM EN 60317-0-2 January 1998 + A1 February 2000 + A2 March 2005 ICS 29.060.10Supersedes EN 60317-0-2:1994 and its amendment Descriptors: winding, electric wire, insulated wire, enamelled wire, copper, rectangular shape, specification, dimension English version Specifications for parti
12、cular types of winding wires Part 0-2: General requirements Enamelled rectangular copper wire (including amendments A1:2000 and A2:2005) (IEC 60317-0-2:1997 + A1:1999 + A2:2005) Spcifications pour types particuliers de fils de bobinage Partie 0: Prescriptions gnrales Section 2: Fil de section rectan
13、gulaire en cuivre maill (inclut les amendements A1:2000 et A2:2005) (CEI 60317-0-2:1997 + A1:1999 + A2:2005) Technische Lieferbedingungen fr bestimmte Typen von Wickeldrhten Teil 0: Allgemeine Anforderungen Hauptabschnitt 2: Lackisolierte Flachdrhte aus Kupfer (enthlt nderungen A1:2000 und A2:2005)
14、(IEC 60317-0-2:1997 + A1:1999 + A2:2005) This European Standard was approved by CENELEC on 1998-01-01. Amendment A1 was approved by CENELEC on 2000-01-01 and amendment A2 was approved on 2005-03-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the con
15、ditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in
16、three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotech
17、nical committees of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. CENELEC
18、European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B-1050 Brussels 1998 CENELEC All rights of exploitation in any form and by any means reserved worldwide fo
19、r CENELEC members. Ref. No. EN 60317-0-2:1998 + A1:2000 + A2:2005 E Licensed Copy: sheffieldun sheffieldun, na, Fri Nov 10 07:38:12 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 60317-0-2:1998 BSI 2006 2 Foreword The texts of documents 55/559/FDIS and 55/610/FDIS, future amendments to IEC 60317-0-2:
20、1990, prepared by IEC TC 55, Winding wires, were submitted to the IEC-CENELEC parallel vote. These texts, together with those of IEC 60317-0-2:1990 and its amendments 1:1992 and 2:1993, were published by IEC as the second edition of IEC 60317-0-2 and were approved by CENELEC as EN 60317-0-2 on 1998-
21、01-01. This European Standard supersedes EN 60317-0-2:1994 and its amendment A2:1994. The following dates were fixed: Annexes designated “normative” are part of the body of the standard. Annexes designated “informative” are given for information only. In this standard, Annex ZA is normative and Anne
22、x A, Annex B and Annex E are informative. Annex ZA has been added by CENELEC. Endorsement notice The text of the International Standard IEC 60317-0-2:1997 was approved by CENELEC as a European Standard without any modification. Foreword to amendment A1 The text of document 55/689/FDIS, future amendm
23、ent 1 to IEC 60317-0-2, prepared by IEC TC 55, Winding wires, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as amendment A1 to EN 60317-0-2:1998 on 2000-01-01. The following dates were fixed: Endorsement notice The text of amendment 1:1999 to the International Standard I
24、EC 60317-0-2:1997 was approved by CENELEC as an amendment without any modification. Foreword to amendment A2 The text of document 55/922/FDIS, future amendment 2 to IEC 60317-0-2, prepared by IEC TC 55, Winding wires, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as amen
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS-EN-60317-0-2-1998 IEC-60317-0-2-1997 BS EN 60317 1998 IEC 1997
链接地址:https://www.31doc.com/p-3743233.html