BS-EN-60264-3-5-1998 IEC-60264-3-5-1996.pdf
《BS-EN-60264-3-5-1998 IEC-60264-3-5-1996.pdf》由会员分享,可在线阅读,更多相关《BS-EN-60264-3-5-1998 IEC-60264-3-5-1996.pdf(10页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 60264-3-5:1998 IEC 60264-3-5: 1996 Including Corrigendum Nov. 1996 Packaging of winding wires Part 3: Taper barrelled delivery spools Section 5: Specification for spool containers made from thermoplastic material The European Standard EN 60264-3-5:1996 has the status of a Brit
2、ish Standard ICS 55.060 Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 13 13:31:46 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 60264-3-5:1998 This British Standard, having been prepared under the direction of the Electrotechnical Sector Committee, was published under the authority of the S
3、tandards Committee and comes into effect on 15 November 1998 BSI 04-1999 ISBN 0 580 30484 1 National foreword This British Standard is the English language version of EN 60264-3-5:1996. It is identical with IEC 60264-3-5:1996, including the Corrigendum issued in November 1996. The UK participation i
4、n its preparation was entrusted to Technical Committee GEL/55, Winding wires, which has the responsibility to: aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests inf
5、ormed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this committee can be obtained on request to its secretary. From 1 January 1997, all IEC publications have the number 60000 added to the old number. For instance, IEC
6、27-1 has been renumbered as IEC 60027-1. For a period of time during the change over from one numbering system to the other, publications may contain identifiers from both systems. Cross-references Attention is drawn to the fact that CEN and CENELEC standards normally include an annex which lists no
7、rmative references to international publications with their corresponding European publications. The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards C
8、orrespondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard doe
9、s not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, the EN title page, pages 2 to 4, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had amendmen
10、ts incorporated. This will be indicated in the amendment table on the inside front cover. Amendments issued since publication Amd. No.DateComments Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 13 13:31:46 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 60264-3-5:1998 BSI 04-1999i Contents Pag
11、e National forewordInside front cover Foreword2 Text of EN 60264-3-53 Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 13 13:31:46 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ii blank Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 13 13:31:46 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEA
12、N STANDARD NORME EUROPENNE EUROPISCHE NORM EN 60264-3-5 December 1996 ICS 55.060 Descriptors: Winding, electric wire, insulated wire, delivery, spool, packaging, thermoplastic, designation, specification, dimension, test English version Packaging of winding wires Part 3: Taper barrelled delivery spo
13、ols Section 5: Specification for spool containers made from thermoplastic material (IEC 264-3-5:1996 + corrigendum 1996) Conditionnement des fils de bobinage Partie 3: Bobines de livraison ft de forme conique Section 5: Spcification pour les conteneurs de bobine faits de matriau thermoplastique (CEI
14、 264-3-5:1996 + corrigendum 1996) Verpackung von Wickeldrhten Teil 3: Lieferspulen mit konischem Kern Hauptabschnitt 5: Spezifikationen fr Behlter aus thermoplastischem Werkstoff (IEC 264-3-5:1996 + Corrigendum 1996) This European Standard was approved by CENELEC on 1996-10-01. CENELEC members are b
15、ound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the
16、 Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the sa
17、me status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CENELEC European Committ
18、ee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B-1050 Brussels 1996 Copyright reserved to CENELEC members Ref. No. EN 60264-3-5:1996 E Licensed Copy: sheffieldun sheffie
19、ldun, na, Mon Nov 13 13:31:46 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 60264-3-5:1996 BSI 04-1999 2 Foreword The text of document 55/493/FDIS, future edition 1 of IEC 264-3-5, prepared by IEC TC 55, Winding wires, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN
20、60264-3-5 on 1996-10-01. The following dates were fixed: Annexes designated “normative” are part of the body of the standard. In this standard, Annex ZA is normative. Annex ZA has been added by CENELEC. Endorsement notice The text of the International Standard IEC 264-3-5:1996 and its corrigendum No
21、vember 1996 was approved by CENELEC as a European Standard without any modification. Contents Page Foreword2 Introduction3 1Scope3 2Normative references3 3Material 3 4Type designation3 5Requirements3 Annex ZA (normative) Normative references to international publications with their corresponding Eur
22、opean publicationsInside back cover Table 1 Mass3 Table 2 Loads4 Table 3 Loads and distance “a”4 Table 4 Impact data4 Table 5 Lifting data4 latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement(dop) 1997-07-01 latest da
23、te by which the national standards conflicting with the EN have to be withdrawn(dow) 1997-07-01 Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 13 13:31:46 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 60264-3-5:1996 BSI 04-19993 Introduction This International Standard is one of a series which
24、deals with insulated wires used for windings in electrical equipment. The series comprises three groups describing: 1) Methods of test (IEC 851); 2) Specifications (IEC 317); 3) Packaging (IEC 264). 1 Scope This section of IEC 264-3 specifies the requirements for spool containers made from thermopla
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS-EN-60264-3-5-1998 IEC-60264-3-5-1996 BS EN 60264 1998 IEC 1996
链接地址:https://www.31doc.com/p-3743235.html