BS-EN-60286-3-1998 IEC-60286-3-1997.pdf
《BS-EN-60286-3-1998 IEC-60286-3-1997.pdf》由会员分享,可在线阅读,更多相关《BS-EN-60286-3-1998 IEC-60286-3-1997.pdf(22页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 60286-3:1998 IEC 60286-3: 1997 Packaging of components for automatic handling Part 3: Packaging of leadless components on continuous tapes The European Standard EN 60286-3:1998 has the status of a British Standard ICS 31.020; 55.060 Licensed Copy: sheffieldun sheffieldun, na,
2、Fri Nov 10 16:39:41 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 60286-3:1998 This British Standard, having been prepared under the direction of the Electrotechnical Sector Board, was published under the authority of the Standards Board and comes into effect on 15 April 1998 BSI 04-1999 ISBN 0 5
3、80 29304 1 National foreword This British Standard is the English language version of EN 60286-3:1998. It is identical with IEC 60286-3:1997. It supersedes BS 6062-3:1993 which will be withdrawn on 1998-10-01. The UK participation in its preparation was entrusted to Technical Committee EPL/40, Capac
4、itors and resistors for electronic equipment, which has the responsibility to: aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related internati
5、onal and European developments and promulgate them in the UK. A list of organizations represented on this committee can be obtained on request to its secretary. From 1 January 1997, all IEC publications have the number 60000 added to the old number. For instance, IEC 27-1 has been renumbered as IEC
6、60027-1. For a period of time during the change over from one numbering system to the other, publications may contain identifiers from both systems. Cross-references Attention is drawn to the fact that CEN and CENELEC Standards normally include an annex which lists normative references to internatio
7、nal publications with their corresponding European publications. The British Standards which implement these international or European publications may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility o
8、f the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations.
9、 Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, the EN title page, pages 2 to 16 and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside
10、 front cover. Amendments issued since publication Amd. No.DateComments Licensed Copy: sheffieldun sheffieldun, na, Fri Nov 10 16:39:41 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 60286-3:1998 BSI 04-1999i Contents Page National forewordInside front cover Foreword2 Text of EN 60286-33 Licensed C
11、opy: sheffieldun sheffieldun, na, Fri Nov 10 16:39:41 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ii blank Licensed Copy: sheffieldun sheffieldun, na, Fri Nov 10 16:39:41 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 60286-3 February 1998 ICS 31.020;
12、55.060Supersedes HD 143.3 S2:1992 Descriptors: Electronic components, packaging, continuous tapes English version Packaging of components for automatic handling Part 3: Packaging of surface mount components on continuous tapes (IEC 60286-3:1997) Emballage de composants pour oprations automatises Par
13、tie 3: Emballage des composants appropris au montage en surface en bandes continues (CEI 60286-3:1997) Gurtung und Magazinierung von Bauelementen fr automatische Verarbeitung Teil 3: Gurtung von oberflchenmontierbaren Bauelementen (IEC 60286-3:1997) This European Standard was approved by CENELEC on
14、1998-01-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may
15、be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to t
16、he Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzer
17、land and United Kingdom. CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B-1050 Brussels 1998 CENELEC All rights of exploitation in any form and b
18、y any means reserved worldwide for CENELEC members. Ref. No. EN 60286-3:1998 E Licensed Copy: sheffieldun sheffieldun, na, Fri Nov 10 16:39:41 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 60286-3:1998 BSI 04-1999 2 Foreword The text of document 40/942/FDIS, future edition 3 of IEC 60286-3, prepared
19、 by IEC TC 40, Capacitors and resistors for electronic equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60286-3 on 1998-01-01. This European Standard supersedes HD 143.3 S2:1992. The following dates were fixed: Annexes designated “normative” are part of the
20、 body of the standard. In this standard, Annex ZA is normative. Annex ZA has been added by CENELEC. Endorsement notice The text of the International Standard IEC 60286-3:1997 was approved by CENELEC as a European Standard without any modification. Contents Page Foreword2 Introduction3 1General3 2Dim
21、ensions3 3Polarity and orientation of components in the tape10 4Fixing of components and additional tape requirements11 5Packing13 6Marking15 Annex ZA (normative) Normative references to international publications with their corresponding European publications16 Figure 1 Punched carrier tape3 Figure
22、 25 Figure 3 Blister carrier tape6 Figure 4 Pitch P1= 2 mm8 Figure 5 Type III, blister carrier tape8 Figure 610 Figure 711 Figure 8 Bending radius12 Figure 9 Camber (top view)12 Figure 10 Leader and trailer13 Figure 11 Reel dimensions13 Figure 12 Reel hole presentation14 Table 1 Minimum bending radi
23、us12 Table 214 Table 314 latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement(dop) 1998-10-01 latest date by which the national standards conflicting with the EN have to be withdrawn(dow) 1998-10-01 Licensed Copy: shef
24、fieldun sheffieldun, na, Fri Nov 10 16:39:41 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 60286-3:1998 BSI 04-19993 Introduction Tape packaging meets the requirements of automatic component placement machines and also covers the use of tape packaging for components for test purposes and other opera
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS-EN-60286-3-1998 IEC-60286-3-1997 BS EN 60286 1998 IEC 1997
链接地址:https://www.31doc.com/p-3743241.html