BS-EN-60384-11-2008.pdf
《BS-EN-60384-11-2008.pdf》由会员分享,可在线阅读,更多相关《BS-EN-60384-11-2008.pdf(30页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 60384-11:2008 Fixed capacitors for use in electronic equipment Part 11: Sectional specification Fixed polyethylene-terephthalate film dielectric metal foil d.c. capacitors ICS 31.060.30 ? Licensed CopyChinese University of Hong Kong, 21/10/2008 08:50, Uncontrolled Copy, (c) BS
2、I BS EN 60384-11:2008 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 July 2008 BSI 2008 ISBN 978 0 580 57746 8 National foreword This British Standard is the UK implementation of EN 60384-11:2008. It is identical to IEC 60384-11:2008. It
3、supersedes BS EN 130100:1998 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee EPL/40X, Capacitors and resistors for electronic equipment. A list of organizations represented on this committee can be obtained on request to its secretary. This publicatio
4、n does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. Amendments/corrigenda issued since publication DateComments Licensed CopyChinese University o
5、f Hong Kong, 21/10/2008 08:50, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD EN 60384-11 NORME EUROPENNE EUROPISCHE NORM April 2008 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central
6、Secretariat: rue de Stassart 35, B - 1050 Brussels 2008 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 60384-11:2008 E ICS 31.060.30 English version Fixed capacitors for use in electronic equipment - Part 11: Sectional specificat
7、ion - Fixed polyethylene-terephthalate film dielectric metal foil d.c. capacitors (IEC 60384-11:2008) Condensateurs fixes utiliss dans les quipements lectroniques - Partie 11: Spcification intermdiaire - Condensateurs fixes pour courant continu dilectrique en film de polytrphtalate dthylne armatures
8、 en feuilles mtalliques (CEI 60384-11:2008) Festkondensatoren zur Verwendung in Gerten der Elektronik - Teil 11: Rahmenspezifikation - Festkondensatoren mit einem Dielektrikum aus Polyethylen-Terephthalat und Belgen aus dnnen Metallfolien fr Gleichspannung (IEC 60384-11:2008) This European Standard
9、was approved by CENELEC on 2008-03-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning s
10、uch national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own
11、 language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy
12、, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Licensed CopyChinese University of Hong Kong, 21/10/2008 08:50, Uncontrolled Copy, (c) BSI Foreword The text of document 40/1839/CDV, fut
13、ure edition 3 of IEC 60384-11, prepared by IEC TC 40, Capacitors and resistors for electronic equipment, was submitted to the IEC-CENELEC parallel Unique Acceptance Procedure and was approved by CENELEC as EN 60384-11 on 2008-03-01. The following dates were fixed: latest date by which the EN has to
14、be implemented at national level by publication of an identical national standard or by endorsement (dop) 2008-12-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2011-03-01 Annex ZA has been added by CENELEC. _ Endorsement notice The text of the Inte
15、rnational Standard IEC 60384-11:2008 was approved by CENELEC as a European Standard without any modification. _ BS EN 60384-11:2008 2 Licensed CopyChinese University of Hong Kong, 21/10/2008 08:50, Uncontrolled Copy, (c) BSI CONTENTS 1 General 5 1.1 Scope5 1.2 Object .5 1.3 Normative references 5 1.
16、4 Information to be given in a detail specification .5 1.4.1 Outline drawing and dimensions 6 1.4.2 Mounting .6 1.4.3 Ratings and characteristics6 1.4.4 Marking .7 1.5 Terms and definitions7 1.6 Marking .7 2 Preferred ratings and characteristics 8 2.1 Preferred characteristics .8 2.1.1 Preferred cli
17、matic categories .8 2.2 Preferred values of ratings 8 2.2.1 Rated capacitance (CR).8 2.2.2 Tolerance on rated capacitance.8 2.2.3 Rated voltage (UR)8 2.2.4 Category voltage (UC).8 2.2.5 Rated temperature.9 3 Quality assessment procedures9 3.1 Primary stage of manufacture9 3.2 Structurally similar co
18、mponents.9 3.3 Certified records of released lots.9 3.4 Qualification approval9 3.4.1 Qualification approval on the basis of the fixed sample size procedure9 3.4.2 Tests .10 3.5 Quality conformance inspection.15 3.5.1 Formation of inspection lots.15 3.5.2 Test schedule16 3.5.3 Delayed delivery16 3.5
19、.4 Assessment levels.16 4 Test and measurement procedures.17 4.1 Visual examination and check of dimensions.17 4.2 Electrical tests.17 4.2.1 Voltage proof.17 4.2.2 Capacitance 17 4.2.3 Tangent of loss angle (tan ) .18 4.2.4 Insulation resistance18 4.2.5 Characteristics depending on temperature (if r
20、equired in the detail specification) .19 4.3 Robustness of terminations .20 4.3.1 Initial measurements .20 4.4 Resistance to soldering heat .20 BS EN 60384-11:2008 3 Licensed CopyChinese University of Hong Kong, 21/10/2008 08:50, Uncontrolled Copy, (c) BSI 4.4.1 Conditions .20 4.4.2 Final inspection
21、, measurements and requirements 20 4.5 Solderability 20 4.6 Rapid change of temperature 20 4.6.1 Initial measurement .20 4.6.2 Number of cycles: 5.21 4.7 Vibration21 4.8 Bump 21 4.8.1 Initial measurements .21 4.8.2 Severities 21 4.8.3 Final inspection, measurements and requirements 21 4.9 Shock21 4.
22、9.1 Initial measurements .21 4.10 Climatic sequence.22 4.10.1 Initial measurements .22 4.10.2 Dry heat 22 4.10.3 Damp heat, cyclic, Test Db, first cycle .22 4.10.4 Cold 22 4.10.5 Low air pressure22 4.10.6 Damp heat, cyclic, Test Db, remaining cycles25 4.11 Damp heat, steady state25 4.11.1 Initial me
23、asurements .25 4.12 Endurance.25 4.13 Component solvent resistance (if applicable).26 4.14 Solvent resistance of the marking (if applicable)26 Bibliography25 Table 1 Fixed sample size test plan for qualification approval Assessment level EZ11 Table 2 Test schedule for qualification approval.12 Table
24、 3 Lot-by-lot inspection16 Table 4 Periodic tests 17 Table 5 Test voltages.17 Table 6 Insulation resistance .18 Table 7 Correction factor dependent on test temperature.19 Table 8 Characteristics at lower category temperature.19 Table 9 Characteristics at upper category temperature 20 Table 10 Accele
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 60384 11 2008
链接地址:https://www.31doc.com/p-3743318.html