BS-EN-50378-3-1-2007.pdf
《BS-EN-50378-3-1-2007.pdf》由会员分享,可在线阅读,更多相关《BS-EN-50378-3-1-2007.pdf(24页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 50378-3-1:2007 Passive components to be used in optical fibre communication systems Product specifications Part 3-1: Type: 100/200 GHz DWDM module terminated on IEC 60793-2-50 category B1.1 and B1.3 single mode fibre The European Standard EN 50378-3-1:2007 has the status of a
2、British Standard ICS 33.180.20 ? Licensed Copy: London South Bank University, London South Bank University, Fri Oct 05 02:41:00 GMT+00:00 2007, Uncontrolled Copy, (c) BSI BS EN 50378-3-1:2007 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 28
3、 September 2007 BSI 2007 ISBN 978 0 580 57688 1 National foreword This British Standard is the UK implementation of EN 50378-3-1:2007. The UK participation in its preparation was entrusted by Technical Committee GEL/86, Fibre optics, to Subcommittee GEL/86/2, Fibre optic interconnecting devices and
4、passive components. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard cannot
5、 confer immunity from legal obligations. Amendments issued since publication Amd. No. DateComments Licensed Copy: London South Bank University, London South Bank University, Fri Oct 05 02:41:00 GMT+00:00 2007, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD EN 50378-3-1 NORME EUROPENNE EUROPISCHE NORM
6、August 2007 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2007 CENELEC - All rights of exploitation in any form and by any mea
7、ns reserved worldwide for CENELEC members. Ref. No. EN 50378-3-1:2007 E ICS 33.180.20 English version Passive components to be used in optical fibre communication systems - Product specifications - Part 3-1: Type: 100/200 GHz DWDM module terminated on IEC 60793-2-50 category B1.1 and B1.3 single mod
8、e fibre Composants passifs destins tre utiliss dans les systmes de communication par fibres optiques - Spcifications de produit - Partie 3-1: Type: module DWDM 100/200 GHz cbl sur fibre unimodale des catgories B1.1 et B1.3 de la CEI 60793-2-50 Passive Bauteile fr Lichtwellenleiter- Datenbertragungss
9、ysteme - Produktnormen - Teil 3-1: Bauart 100/200 GHz-DWDM- Modul zum Anschluss an Einmodenfasern der Typen B1.1 und B1.3 nach IEC 60793-2-50 This European Standard was approved by CENELEC on 2007-04-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate th
10、e conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exist
11、s in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electr
12、otechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerl
13、and and the United Kingdom. Licensed Copy: London South Bank University, London South Bank University, Fri Oct 05 02:41:00 GMT+00:00 2007, Uncontrolled Copy, (c) BSI EN 50378-3-1:2007 - 2 - Foreword This European Standard was prepared by the Technical Committee CENELEC TC 86BXA, Fibre optic intercon
14、nect, passive and connectorised components. The text of the draft was submitted to the Unique Acceptance Procedure and was approved by CENELEC as EN 50378-3-1 on 2007-04-01. The following dates were fixed: - latest date by which the EN has to be implemented at national level by publication of an ide
15、ntical national standard or by endorsement (dop) 2008-04-01 - latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2010-04-01 _ Licensed Copy: London South Bank University, London South Bank University, Fri Oct 05 02:41:00 GMT+00:00 2007, Uncontrolled Copy,
16、(c) BSI - 3 - EN 50378-3-1:2007 Passive components to be used in optical fibre communication systems - Product specifications Part 3-1: Type: 100/200 GHz DWDM module terminated on IEC 60793-2-50 category B1.1 and B1.3 single mode fibre Description Performance Application: For use in controlled envir
17、onment EN 61753-1 Category C Attenuation Grade Grade S Grade P Mux/Demux: 100 GHz / 200 GHz n x 0,5 + 0,8 dB n x 0,5 + 0,5 dB n = number of channels Isolation Adjacent channels NonAdj. channels Mux : Demux: 100 GHz 200 GHz 100 GHz 200 GHz 10 dB 12 dB 25 dB 30 dB 10 dB 12 dB 30 dB 35 dB Return Loss:
18、Type: 100 / 200 GHz DWDM module Configuration: pigtailed module Fibre Category: EN 60793-2-50 Type B1.1 and B1.3 Cable Type: 900 m buffered fibre Grade 3 35 dB Related documents: EN 50377 series Connector sets and interconnect components to be used in optical fibre communication systems - Product sp
19、ecifications EN 60794-2 Optical fibre cables - Part 2: Indoor cables - Sectional specification (IEC 60794-2) EN 61300 series Fibre optic interconnecting devices and passive components - Basic test and measurement procedures (IEC 61300 series) EN 61753-1 Fibre optic interconnecting devices and passiv
20、e components performance standard - Part 1: General and guidance for performance standard (IEC 61753-1) IEC/PAS 62074-1 Fibre Optic WDM devices - Part 1: Generic specification ETSI ES 201 791 Transmission and Multiplexing (TM) - Dense Wavelength Division Multiplexing devices - Common requirements an
21、d conformance testing ETSI EN 300 019-1-4 Environmental Engineering (EE) - Environmental conditions and environmental tests for telecommunications equipment - Part 1-4: Classification of environmental conditions - Stationary use at non-weatherprotected locations ITU Recommendation G 671 Transmission
22、 characteristics of optical components and subsystems Licensed Copy: London South Bank University, London South Bank University, Fri Oct 05 02:41:00 GMT+00:00 2007, Uncontrolled Copy, (c) BSI EN 50378-3-1:2007 - 4 - Outline and maximum dimensions 9,5 COMMON 90 120 Up to 8 Outputs common 0.9mm buffer
23、ed fiber Licensed Copy: London South Bank University, London South Bank University, Fri Oct 05 02:41:00 GMT+00:00 2007, Uncontrolled Copy, (c) BSI - 5 - EN 50378-3-1:2007 Contents Foreword2 Contents5 1 Scope.6 1.1 Product definition.6 1.2 Interchangeability.6 1.3 Operating environment6 1.4 Reliabili
24、ty.6 1.5 Quality assurance.6 2 Normative references6 3 Description.7 3.1 General7 3.2 Cable fixing structure.7 3.3 Materials.7 3.4 Dimensions.7 3.5 Marking 7 4 Variants8 4.1 DWDM module variants8 5 Dimensional requirements.9 6 Tests9 6.1 Sample definition and size.9 6.2 Test and measurement methods.
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 50378 2007
链接地址:https://www.31doc.com/p-3743445.html