BS-EN-60874-17-1997 IEC-60874-17-1995 QC-211300-1995.pdf
《BS-EN-60874-17-1997 IEC-60874-17-1995 QC-211300-1995.pdf》由会员分享,可在线阅读,更多相关《BS-EN-60874-17-1997 IEC-60874-17-1995 QC-211300-1995.pdf(14页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 60874-17:1997 IEC 60874-17: 1995 QC 211300: 1995 Connectors for optical fibres and cables Part 17: Sectional specification for fibre optic connector Type F-05 (friction lock) The European Standard EN 60874-17:1997 has the status of a British Standard ICS 33.180.20 Licensed Cop
2、y: sheffieldun sheffieldun, na, Sat Nov 11 12:37:11 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 60874-17:1997 This British Standard, having been prepared under the direction of the Electrotechnical Sector Board, was published under the authority of the Standards Board and comes into effect on 1
3、5 December 1997 BSI 03-1999 ISBN 0 580 28541 3 National foreword This British Standard is the English language version of EN 60874-17:1997. It is identical with IEC 60874-17:1995. The UK participation in its preparation was entrusted by Technical Committee EPL/86, Fibre optics, to Subcommittee EPL/8
4、6/2, Interconnecting devices and passive components, which has the responsibility to: aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related in
5、ternational and European developments and promulgate them in the UK. A list of organizations represented on this subcommittee can be obtained on request to its secretary. From 1 January 1997, all IEC publications have the number 60000 added to the old number. For instance, IEC 27-1 has been renumber
6、ed as IEC 60027-1. For a period of time during the change over from one numbering system to the other, publications may contain identifiers from both systems. Cross-references Attention is drawn to the fact that CEN and CENELEC Standards normally include an annex which lists normative references to
7、international publications with their corresponding European publications. The British Standards which implement these international or European publications may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find”
8、facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal ob
9、ligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, the EN title page, pages 2 to 8, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in th
10、e amendment table on the inside front cover. Amendments issued since publication Amd. No.DateComments Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 11 12:37:11 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 60874-17:1997 BSI 03-1999i Contents Page National ForewordInside front cover Foreword
11、2 Text of EN 60874-173 Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 11 12:37:11 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ii blank Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 11 12:37:11 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 6
12、0874-17 September 1997 ICS 33.180.20 Descriptors: Connectors for optical fibres, type F-05 English version Connectors for optical fibres and cables Part 17: Sectional specification for fibre optic connector Type F-05 (friction lock) (IEC 60874-17-1995 + corrigendum May 1996) Connecteurs pour fibres
13、et cbles optiques Partie 17: Spcification intermdiaire pour connecteur pour fibres optiques Type F-05 (verrouillage par friction) (CEI 60874-17:1995 + corrigendum 1996) Steckverbinder fr Lichtwellenleiter und LWL-Kabel Teil 17: Rahmenspezifikation fr LWL-Steckverbinder Bauart F-05 (Reibverschlu) (IE
14、C 60874-17:1995 + Corrigendum 1996) This European Standard was approved by CENELEC on 1997-07-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. U
15、p-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translatio
16、n under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, It
17、aly, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Normung Electrotechnische Normung Central Secretariat: rue de Stassart
18、 35, B-1050 Brussels 1997 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 60874-17:1997 E Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 11 12:37:11 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 60874-17:1997 BSI 03-1999 2 Fore
19、word The text of the International Standard IEC 60874-17:1995 and its corrigendum May 1996, prepared by SC 86B, Fibre optic interconnecting devices and passive components, of IEC TC 86, Fibre optics, was submitted to the formal vote and was approved by CENELEC as EN 60874-17 on 1997-07-01 without an
20、y modification. The following dates were fixed: Annexes designated “normative” are part of the body of the standard. In this standard, Annex ZA is normative. Annex ZA has been added by CENELEC. Endorsement notice The text of the International Standard IEC 60874-17:1995 and its corrigendum May 1996 w
21、as approved by CENELEC as a European Standard without any modification. Contents Page Foreword2 1General3 1.1 Scope3 1.2Normative references3 2Requirements3 2.1Classification3 2.2Keying3 2.3Reference components3 2.4Gauges3 2.5Non-flammable materials3 3Quality assessment procedures3 3.1Qualification
22、approval3 3.1.1 Fixed sample procedure3 3.1.2 Lot-by-lot and periodic procedure7 3.2Quality conformance inspection7 3.2.1 Lot-by-lot inspection7 3.2.2 Periodic inspection7 Annex ZA (normative) Normative references to international publications with their corresponding European publicationsInside bac
23、k cover Figure 1 Plug mating-face dimensions4 Figure 2 Socket mating-face dimensions5 Figure 3 Adaptor mating-face dimensions6 latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement(dop) 1998-06-01 latest date by which t
24、he national standards conflicting with the EN have to be withdrawn(dow) 1998-06-01 Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 11 12:37:11 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 60874-17:1997 BSI 03-19993 1 General 1.1 Scope This sectional specification is part of the relevant specifi
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS-EN-60874-17-1997 IEC-60874-17-1995 QC-211300-1995 BS EN 60874 17 1997 IEC 1995 QC 211300
链接地址:https://www.31doc.com/p-3743534.html