BS-EN-61056-1-1993 IEC-61056-1-1991.pdf
《BS-EN-61056-1-1993 IEC-61056-1-1991.pdf》由会员分享,可在线阅读,更多相关《BS-EN-61056-1-1993 IEC-61056-1-1991.pdf(14页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 61056-1:1993 IEC 1056-1: 1991 Portable lead-acid cells and batteries (Valve-regulated types) Part 1: General requirements, functional characteristics Methods of test This European Standard EN 61056-1:1993 has the status of a British Standard UDC 621.355.2:620.1 Licensed Copy:
2、sheffieldun sheffieldun, na, Fri Nov 10 13:25:25 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 61056-1:1993 This British Standard, having been prepared under the direction of the Light Electrical Engineering Standards Policy Committee, was published under the authority of the Standards Board and
3、comes into effect on 15 July 1993 BSI 07-1999 The following BSI references relate to the work on this standard: Committee reference LEL/21 Special announcement BSI News June 1993 ISBN 0 580 21865 1 Cooperating organizations The European Committee for Electrotechnical Standardization (CENELEC), under
4、 whose supervision this European Standard was prepared, comprises the national committees of the following countries: AustriaItaly BelgiumLuxembourg DenmarkNetherlands FinlandNorway FrancePortugal GermanySpain GreeceSweden IcelandSwitzerland IrelandUnited Kingdom Amendments issued since publication
5、Amd. No.DateComments Licensed Copy: sheffieldun sheffieldun, na, Fri Nov 10 13:25:25 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 61056-1:1993 BSI 07-1999i Contents Page Cooperating organizationsInside front cover National forewordii Foreword2 Text of EN 61056-13 National annex NA (informative)
6、Committees responsibleInside back cover National annex NB (informative) Cross-referencesInside back cover Licensed Copy: sheffieldun sheffieldun, na, Fri Nov 10 13:25:25 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 61056-1:1993 ii BSI 07-1999 National foreword This British Standard has been prep
7、ared under the direction of the Light Electrical Engineering Standards Policy Committee and is the English language version of EN 61056-1 Portable lead-acid cells and batteries (Valve-regulated types) Part 1: General requirements, functional characteristics Methods of test, published by the European
8、 Committee for Electrotechnical Standardization (CENELEC). It was derived by CENELEC from IEC 1056-1:1991 published by the International Electrotechnical Commission (IEC). This British Standard supersedes BS 6745-1:1986 which is withdrawn. A British Standard does not purport to include all the neces
9、sary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, the EN
10、 title page, pages 2 to 8, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover. Licensed Copy: sheffieldun sheffieldun, na, Fri Nov 10 13:25:25 GMT
11、+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 61056-1 February 1993 UDC 621.355.2:620.1 Descriptors: Secondary battery, lead-acid battery, construction, designation, functional characteristics, test conditions, portable equipment English version Portabl
12、e lead-acid cells and batteries (Valve-regulated types) Part 1: General requirements, functional characteristics Methods of test (IEC 1056-1:1991) Elments et batteries au plomb portatifs (Types soupapes) Partie 1: Prescriptions gnrales et caractristiques fonctionnelles Mthodes dessai (CEI 1056-1:199
13、1) Tragbare Bleibatterien (Typen mit Ventil) Teil 1: Allgemeine Anforderungen, Eigenschaften Prfverfahren (IEC 1056-1:1991) This European Standard was approved by CENELEC on 1992-12-09. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for g
14、iving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three officia
15、l versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committ
16、ees of Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europ
17、isches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B-1050 Brussels 1993 Copyright reserved to CENELEC members Ref. No. EN 61056-1:1993 E Licensed Copy: sheffieldun sheffieldun, na, Fri Nov 10 13:25:25 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 61056-1:1993 BSI 07
18、-1999 2 Foreword The CENELEC questionnaire procedure, performed for finding out whether or not the International Standard IEC 1056-1:1991 could be accepted without textual changes, has shown that no common modifications were necessary for the acceptance as European Standard. The reference document w
19、as submitted to the CENELEC members for formal vote and was approved by CENELEC as EN 61056-1 on 9 December 1992. The following dates were fixed: Annexes designated “normative” are part of the body of the standard. In this standard, Annex ZA is normative. Contents Page Foreword2 Section 1. General 1
20、.1Scope and object3 1.2Normative references3 Section 2. General requirements 2.1Construction3 2.2Mechanical strength3 2.3Designation3 2.4Marking of polarity4 Section 3. Functional characteristics and specific requirements 3.1Capacity4 3.2Endurance in cycles4 3.3Charge retention4 3.4Maximum permissib
21、le current4 3.5Charge acceptance after deep discharge4 Section 4. General test conditions 4.1Sampling and preparation of batteries for testing4 4.2Measuring instruments5 Section 5. Test methods 5.1Capacity Ca (actual capacity at the 20 h discharge rate)5 5.2Capacity Ca1 (actual capacity at the 1 h d
22、ischarge rate)5 5.3Endurance in cycles5 5.4Charge retention6 5.5Maximum permissible current6 5.6Charge acceptance after deep discharge6 Annex ZA (normative) Other international publications quoted in this standard with the references of the relevant European publications7 latest date of publication
23、of an identical national standard(dop) 1993-12-01 latest date of withdrawal of conflicting national standards(dow) 1993-12-01 Licensed Copy: sheffieldun sheffieldun, na, Fri Nov 10 13:25:25 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 61056-1:1993 BSI 07-19993 Section 1. General 1.1 Scope and objec
24、t This part of International Standard IEC 1056 is applicable to lead-acid cells and batteries of the valve-regulated type for cyclic application in, for example, portable equipment, tools, toys, etc. The cells of this kind of lead-acid battery may either have flat-plate electrodes in prismatic conta
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS-EN-61056-1-1993 IEC-61056-1-1991 BS EN 61056 1993 IEC 1991
链接地址:https://www.31doc.com/p-3743588.html