BS-EN-61029-2-1-2002.pdf
《BS-EN-61029-2-1-2002.pdf》由会员分享,可在线阅读,更多相关《BS-EN-61029-2-1-2002.pdf(32页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 61029-2-1:2002 Incorporating Corrigendum No. 1 Safety of transportable motor-operated electric tools Part 2-1: Particular requirements for circular saw benches The European Standard EN 61029-2-1:2002 has the status of a British Standard ICS 25.140.20 ? Licensed Copy: sheffield
2、un sheffieldun, na, Thu Nov 09 09:07:12 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 61029-2-1:2002 This British Standard, having been prepared under the direction of the Electrotechnical Sector Policy and Strategy Committee, was published under the authority of the Standards Policy and Strategy
3、 Committee on 27 September 2002 BSI 30 April 2003 ISBN 0 580 40456 0 National foreword This British Standard is the official English language version of EN 61029-2-1:2002, including Corrigendum January 2003. It was derived by CENELEC from IEC 61029-2-1:1993. The common modifications have been implem
4、ented by CENELEC and are indicated in the text by a vertical line in the left margin. The UK participation in its preparation was entrusted by Technical Committee CPL/61, Safety of household and similar electrical appliances, to Subcommittee CPL/61/6, Portable motor-operated tools, which has the res
5、ponsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitle
6、d “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance w
7、ith a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related intern
8、ational and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 28, an inside back cover and a back cover. The BSI copyright date displayed in this document indicates when the document was l
9、ast issued. Amendments issued since publication Amd. No. DateComments 14390 Corrigendum No.1 30 April 2003 Replacement of Figure Z107 and Figure Z113 Licensed Copy: sheffieldun sheffieldun, na, Thu Nov 09 09:07:12 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD EN 61029-2-1 NORME EUROPE
10、NNE EUROPISCHE NORM May 2002 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2002 CENELEC - All rights of exploitation in any fo
11、rm and by any means reserved worldwide for CENELEC members. Ref. No. EN 61029-2-1:2002 E ICS 25.140.20 Incorporating Corrigendum January 2003 English version Safety of transportable motor-operated electric tools Part 2-1: Particular requirements for circular saw benches (IEC 61029-2-1:1993 + A1:1999
12、 + A2:2001, modified) Scurit des machines outils lectrique semi-fixes Partie 2-1: Rgles particulires pour les scies circulaires table (CEI 61029-2-1:1993 + A1:1999 + A2:2001, modifie) Sicherheit transportabler motorbetriebener Elektrowerkzeuge Teil 2-1: Besondere Anforderungen an Tischkreissgen (IEC
13、 61029-2-1:1993 + A1:1999 + A2:2001, modifiziert) This European Standard was approved by CENELEC on 2001-12-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any
14、 alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made
15、 by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany
16、, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. Licensed Copy: sheffieldun sheffieldun, na, Thu Nov 09 09:07:12 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN -92016-2:12002 2 Foreword The text of the International St
17、andard IEC 61029-2-1:1993 and its amendments 1:1999 and 2:2001, prepared by SC 61F, Safety of hand-held motor-operated electric tools, of IEC TC 61, Safety of household and similar electrical appliances, together with the common modifications prepared by the Technical Committee CENELEC TC 61F, Hand-
18、held and transportable electric motor-operated tools, was submitted to the formal vote and was approved by CENELEC as EN 61029-2-1 on 2001-12-01. The following dates were fixed: -latest date by which the EN has to be implemented at national level by publication of an identical national standard or b
19、y endorsement(dop)2002-12-01 -latest date by which the national standards conflicting with the EN have to be withdrawn(dow)2004-12-01 In this document the common modifications to the International Standard are indicated by a vertical line in the left margin of the text. This standard is divided into
20、 two parts: Part 1General requirements that are common to most transportable electric motor operated tools (for the purpose of this standard referred to simply as tools) which could come within the scope of this standard; Part 2Requirements for particular types of tool which either supplement or mod
21、ify the requirements given in part 1 to account for the particular hazards and characteristics of these specific tools. This European Standard has been prepared under a mandate given to CEN/CENELEC by the European Commission and the European Free Trade Association and supports the essential health a
22、nd safety requirements of the Machinery Directive. Compliance with the relevant clauses of part 1 together with this part 2 provides one means of conforming with the specified essential requirements of the Directive. The requirements defined in EN 1050 are also dealt with in this standard. For noise
23、 and vibration this standard covers the requirements for their measurement, the provision of information arising from these measurements and the provision of information about the personal protective equipment required. Specific requirements for the reduction of the risk arising from noise and vibra
24、tion through the design of the tool are not given as this reflects the current state of the art. Warning:Other requirements arising from other EC Directives can be applicable to the products falling within the scope of this standard. This part 2-1 is to be used in conjunction with EN 61029-1:2000. T
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 61029 2002
链接地址:https://www.31doc.com/p-3743601.html