BS-EN-60286-6-1999 IEC-60286-6-1998.pdf
《BS-EN-60286-6-1999 IEC-60286-6-1998.pdf》由会员分享,可在线阅读,更多相关《BS-EN-60286-6-1999 IEC-60286-6-1998.pdf(12页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 60286-6:1999 IEC 60286-6:1998 Packaging of components for automatic handling Part 6: Bulk case packaging for surface mounting components The European Standard EN 60286-6:1998 has the status of a British Standard ICS 31.020; 55.060 Licensed Copy: sheffieldun sheffieldun, na, Fr
2、i Nov 10 16:46:59 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 60286-6:1999 This British Standard, having been prepared under the direction of the Electrotechnical Sector Committee, was published under the authority of the Standards Committee and comes into effect on 15 February 1999 BSI 06-1999
3、 ISBN 0 580 30871 5 National foreword This British Standard is the English language version of EN 60286-6:1998. It is identical with IEC 60286-6:1998. The UK participation in its preparation was entrusted to Technical Committee EPL/40, Capacitors and resistors for electronic equipment, which has the
4、 responsibility to: aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the U
5、K. A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references Attention is drawn to the fact that CEN and CENELEC Standards normally include an annex which lists normative references to international publications with their corresponding Europ
6、ean publications. The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Elec
7、tronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This d
8、ocument comprises a front cover, an inside front cover, pages i and ii, the EN title page, pages 2 to 6 and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover. Amendments
9、issued since publication Amd. No. Date Comments Licensed Copy: sheffieldun sheffieldun, na, Fri Nov 10 16:46:59 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 60286-6:1999 BSI 06-1999i Contents Page National forewordInside front cover Foreword2 Text of EN 60286-63 Licensed Copy: sheffieldun sheffi
10、eldun, na, Fri Nov 10 16:46:59 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ii blank Licensed Copy: sheffieldun sheffieldun, na, Fri Nov 10 16:46:59 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 60286-6 November 1998 ICS 31.020 English version Packagin
11、g of components for automatic handling Part 6: Bulk case packaging for surface mounting components (IEC 60286-6:1998) Emballage des composants pour oprations automatises Partie 6: Emballage en vrac des composants pour montage en surface (CEI 60286-6:1998) Gurtung und Magazinierung von Bauelementen f
12、r automatische Verarbeitung Teil 6: Schttgutbehlter fr oberflchenmontierbare Bauelemente (IEC 60286-6:1998) This European Standard was approved by CENELEC on 1998-10-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this Europ
13、ean Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (Engl
14、ish, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria,
15、Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europ
16、isches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B-1050 Brussels 1998 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 60286-6:1998 E Licensed Copy: sheffieldun sheffieldun, na, Fri Nov 10 16:46:59
17、 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 60286-6:1998 BSI 06-1999 2 Foreword The text of document 40/1058/FDIS, future edition 1 of IEC 60286-6, prepared by IEC TC 40, Capacitors and resistors for electronic equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC
18、as EN 60286-6 on 1998-10-01. The following dates were fixed: The International Electrotechnical Commission (IEC) and CENELEC draw attention to the fact that it is claimed that compliance with this International Standard/European Standard may involve the use of a patent concerning the structure of th
19、e bulk case given in 2.1. The IEC and CENELEC take no position concerning the evidence, validity and scope of this patent right. The holder of this patent right has assured the IEC that he is willing to negotiate licences under reasonable and non-discriminatory terms and conditions with applicants t
20、hroughout the world. In this respect, the statement of the holder of this patent right is registered with the IEC (a copy is available at CENELEC) Information may be obtained from: Murata Manufacturing Co., Ltd. 26-10, 2- Chome Tenjin Nagaokakyo-SHI Kyoto 817, Japan Phone: 074-991-9111 Fax: 075-954-
21、7720 Attention is drawn to the possibility that some of the elements of this International Standard/European Standard may be the subject of patent rights other than those identified above. IEC and CENELEC shall not be held responsible for identifying any or all such patent rights. Endorsement notice
22、 The text of the International Standard IEC 60286-6:1998 was approved by CENELEC as a European Standard without any modification. Contents Page Foreword2 1Scope3 2Requirements3 2.1Case assembly3 2.2Shutter mechanism3 2.3Dimensions3 2.4Material5 2.5Mechanical stability5 3Marking5 Annex A (informative
23、) Packing capacity6 Bibliography6 Figure 1 Bulk case General view3 Figure 2 Dimensions4 Table 1 Dimensions of coupling interface5 Table A.1 Capacitors6 Table A.2 Resistors6 Table A.3 Resistors (cylindrical)6 latest date by which the EN has to be implemented at national level by publication of an ide
24、ntical national standard or by endorsement(dop) 1999-07-01 latest date by which the national standards conflicting with the EN have to be withdrawn(dow) 2001-07-01 Licensed Copy: sheffieldun sheffieldun, na, Fri Nov 10 16:46:59 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 60286-6:1998 BSI 06-19993
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS-EN-60286-6-1999 IEC-60286-6-1998 BS EN 60286 1999 IEC 1998
链接地址:https://www.31doc.com/p-3743610.html