BS-EN-61188-5-2-2003.pdf
《BS-EN-61188-5-2-2003.pdf》由会员分享,可在线阅读,更多相关《BS-EN-61188-5-2-2003.pdf(56页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 61188-5-2:2003 Printed boards and printed board assemblies Design and use Part 5-2: Attachment (land/joint) considerations Discrete components The European Standard EN 61188-5-2:2003 has the status of a British Standard ICS 31.180; 31.190 ? Licensed Copy: sheffieldun sheffield
2、un, na, Fri Nov 10 17:03:22 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 61188-5-2:2003 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 16 October 2003 BSI 16 October 2003 ISBN 0 580 42760 9 National foreword This British Standard is the
3、official English language version of EN 61188-5-2:2003. It is identical with IEC 61188-5-2:2003. The UK participation in its preparation was entrusted to Technical Committee EPL/501, Electronic assembly technology, which has the responsibility to: A list of organizations represented on this committe
4、e can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Sear
5、ch” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal ob
6、ligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summar
7、y of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 53 and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. DateComments Licensed Copy: sheffi
8、eldun sheffieldun, na, Fri Nov 10 17:03:22 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD EN 61188-5-2 NORME EUROPENNE EUROPISCHE NORM September 2003 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr E
9、lektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2003 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 61188-5-2:2003 E ICS 31.180; 31.190 English version Printed boards and printed board assembli
10、es - Design and use Part 5-2: Attachment (land/joint) considerations - Discrete components (IEC 61188-5-2:2003) Cartes imprimes et cartes imprimes quipes - Conception et utilisation Partie 5-2: Considrations sur les liaisons pistes-soudures - Composants discrets (CEI 61188-5-2:2003) Leiterplatten un
11、d Flachbaugruppen - Konstruktion und Anwendung Teil 5-2: Betrachtungen zur Montage (Anschlussflche/Verbindung) - Einzelbauelemente (IEC 61188-5-2:2003) This European Standard was approved by CENELEC on 2003-09-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which st
12、ipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Stan
13、dard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the natio
14、nal electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Lithuania, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom. Licensed Copy: sheffieldun sheffield
15、un, na, Fri Nov 10 17:03:22 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 68118-5-2:0230 - - 2 Foreword The text of document 91/382/FDIS, future edition 1 of IEC 61188-5-2, prepared by IEC TC 91, Electronics assembly technology, was submitted to the IEC-CENELEC parallel vote and was approved by CENE
16、LEC as EN 61188-5-2 on 2003-09-01. This European Standard is to be read in conjunction with EN 61188-5-1:2002. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2004-06-01 lates
17、t date by which the national standards conflicting with the EN have to be withdrawn (dow) 2006-09-01 Annexes designated “normative“ are part of the body of the standard. In this standard, annex ZA is normative. Annex ZA has been added by CENELEC. _ Endorsement notice The text of the International St
18、andard IEC 61188-5-2:2003 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60051 NOTE Harmonized as EN 60051 series (not modified). IEC 61191-1 NOTE Harmonized as
19、EN 61191-1:1998 (not modified). IEC 61191-2 NOTE Harmonized as EN 61191-2:1998 (not modified). _ Page 2 EN 6118852:2003 Licensed Copy: sheffieldun sheffieldun, na, Fri Nov 10 17:03:22 GMT+00:00 2006, Uncontrolled Copy, (c) BSI CONTENTS 1 Scope.7 2 Normative references .7 3 Packaging 8 4 Fixed rectan
20、gular chip resistors8 4.1 Introductory remark .8 4.2 Component description8 4.3 Component dimensions .9 4.4 Solder joint fillet design .10 4.5 Land pattern dimensions .12 5 Fixed cylindrical chip resistors14 5.1 Introductory remark .14 5.2 Component description14 5.3 Component dimensions .15 5.4 Sol
21、der joint fillet design .15 5.5 Land pattern dimensions .17 6 Fixed multilayer ceramic chip capacitors 19 6.1 Introductory remark .19 6.2 Component description19 6.3 Component dimensions .21 6.4 Solder joint fillet design .21 6.5 Land pattern dimensions .23 7 Fixed tantalum chip capacitors .25 7.1 I
22、ntroductory remark .25 7.2 Component description25 7.3 Component dimensions .26 7.4 Solder joint fillet design .26 7.5 Land pattern dimensions .28 8 Fixed aluminium electrolytic chip capacitors with non-solid electrolyte (vertical type).30 8.1 Introductory remark .30 8.2 Component description30 8.3
23、Component dimensions .31 8.4 Solder joint fillet design .32 8.5 Land pattern dimensions .33 9 Fixed aluminium electrolytic chip capacitors with non-solid electrolyte (horizontal type).35 9.1 Introductory remark .35 9.2 Component description35 9.3 Component dimensions .36 9.4 Solder joint fillet desi
24、gn .37 9.5 Land pattern dimensions .38 Page 3 EN 6118852:2003 Licensed Copy: sheffieldun sheffieldun, na, Fri Nov 10 17:03:22 GMT+00:00 2006, Uncontrolled Copy, (c) BSI 10 Fixed film chip capacitors .40 10.1 Introductory remark .40 10.2 Component description40 10.3 Component dimensions .41 10.4 Sold
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 61188 2003
链接地址:https://www.31doc.com/p-3743617.html