BS-EN-60684-3-340-TO-342-1994 IEC-60684-3-340-TO-342-1992.pdf
《BS-EN-60684-3-340-TO-342-1994 IEC-60684-3-340-TO-342-1992.pdf》由会员分享,可在线阅读,更多相关《BS-EN-60684-3-340-TO-342-1994 IEC-60684-3-340-TO-342-1992.pdf(12页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 60684-3-340 to 342:1994 IEC 684-3-340 to 342:1992 Specification for Flexible insulating sleeving Part 3: Specification requirements for individual types of sleeving Sheets 340 to 342: Expandable braided polyethylene terephthalate textile sleeving The European Standard EN 60684
2、-3-340 to 342:1994 has the status of a British Standard UDC 621.315.616:621.315.671 Licensed Copy: sheffieldun sheffieldun, na, Thu Nov 09 15:03:01 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 60684-3-340 to 342:1994 This British Standard, having been prepared under the direction of the Cables a
3、nd Insulation Standards Policy Committee, was published under the authority of the Standards Board and comes into effect on 15 October 1994 BSI 12-1999 The following BSI references relate to the work on this standard: Committee reference CIL/15/3 Special announcement in BSI News, July 1994 ISBN 0 58
4、0 23444 4 Cooperating organizations The European Committee for Electrotechnical Standardization (CENELEC), under whose supervision this European Standard was prepared, comprises the national committees of the following countries: AustriaItaly BelgiumLuxembourg DenmarkNetherlands FinlandNorway France
5、Portugal GermanySpain GreeceSweden IcelandSwitzerland IrelandUnited Kingdom Amendments issued since publication Amd. No.DateComments Licensed Copy: sheffieldun sheffieldun, na, Thu Nov 09 15:03:01 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 60684-3-340 to 342:1994 BSI 12-1999i Contents Page Coo
6、perating organizationsInside front cover National forewordii Foreword2 Introduction3 1General3 1.1Scope3 1.2Normative references3 2Designation3 3Requirements3 3.1Basic requirements for compliance3 3.2Special additional requirements3 Annex ZA (normative) Other international publications quoted in thi
7、s standard with the references of the relevant European publications6 National annex NA (informative) Committees responsibleInside back cover National annex NB (informative) Cross-referencesInside back cover Table 1 Dimensional requirements4 Table 2 Requirements for other properties5 Table 3 Special
8、 additional requirements5 Licensed Copy: sheffieldun sheffieldun, na, Thu Nov 09 15:03:01 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 60684-3-340 to 342:1994 ii BSI 12-1999 National foreword This British Standard has been prepared under the direction of the Cables and Insulation Standards Polic
9、y Committee and is the English language version of EN 60684-3-340 to 342:1994 Specification for flexible insulating sleeving Part 3: Specification requirements for individual types of sleeving sheets 340 to 342: Expandable braided polyethylene terephthalate textile sleeving, published by the Europea
10、n Committee for Electrotechnical Standardization (CENELEC). It is identical with IEC 684-3-340 to 342:1992 published by the International Electrotechnical Commission (IEC). A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are respo
11、nsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, the EN title page, pages 2 to 6, an inside back cover and a back cover. T
12、his standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover. Licensed Copy: sheffieldun sheffieldun, na, Thu Nov 09 15:03:01 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUR
13、OPENNE EUROPISCHE NORM EN 60684-3-340 to 342 May 1994 UDC 621.315.616:621.315.671 Descriptors: Electrical insulating materials, protectors sleevings, expandable sleevings, terephtalate polyethylene, textile sleevings English version Specification for flexible insulating sleeving Part 3: Specificatio
14、n requirements for individual types of sleeving Sheets 340 to 342: Expandable braided polyethylene terephthalate textile sleeving (IEC 684-3-340 to 342:1992) Spcification pour gaines isolantes souples Partie 3: Spcifications particulires aux types particuliers de gaines Feuilles 340 342: Gaines expa
15、nsibles tresses de trphtalate de polythylne (CEI 684-3-340 342:1992) Bestimmung fr flexible Isolierschluche Teil 3: Anforderungen fr einzelne Schlauchtypen Bltter 340 bis 342: Aufweitbare, geflochtene Poly(ethylenterephthalat)- Textilschluche (IEC 684-3-340 bis 342:1992) This European Standard was a
16、pproved by CENELEC on 1993-12-08. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such n
17、ational standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own lang
18、uage and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, S
19、witzerland and United Kingdom. CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B-1050 Brussels 1994 Copyright reserved to CENELEC members Ref. No.
20、 EN 60684-3-340 to 342:1994 E Licensed Copy: sheffieldun sheffieldun, na, Thu Nov 09 15:03:01 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 60684-3-340 to 342:1994 BSI 12-1999 2 Foreword The CENELEC questionnaire procedure, performed for finding out whether or not the International Standard IEC 684-
21、3-340 to 342:1992 could be accepted without textual changes, has shown that no common modifications were necessary for the acceptance as a European Standard. The reference document was submitted to the CENELEC members for formal vote and was approved by CENELEC as EN 60684-3-340 to 342 on 8 December
22、 1993. The following dates were fixed: For products which have complied with the relevant national standard before 1994-12-01, as shown by the manufacturer or by a certification body, this previous standard may continue to apply for production until 1999-12-01. Annexes designated “normative” are par
23、t of the body of the standard. In this standard, Annex ZA is normative. latest date of publication of an identical national standard(dop) 1994-12-01 latest date of withdrawal of conflicting national standards(dow) 1994-12-01 Licensed Copy: sheffieldun sheffieldun, na, Thu Nov 09 15:03:01 GMT+00:00 2
24、006, Uncontrolled Copy, (c) BSI EN 60684-3-340 to 342:1994 BSI 12-19993 Introduction This International Standard is one of a series which deals with flexible insulating sleeving for electrical purposes. This series consists of three parts: Part 1: Definitions and general requirements (IEC 684-1); Pa
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS-EN-60684-3-340-TO-342-1994 IEC-60684-3-340-TO-342-1992 BS EN 60684 340 TO 342 1994 IEC 1992
链接地址:https://www.31doc.com/p-3743622.html