BS-EN-61076-4-103-1999 IEC-61076-4-103-1999.pdf
《BS-EN-61076-4-103-1999 IEC-61076-4-103-1999.pdf》由会员分享,可在线阅读,更多相关《BS-EN-61076-4-103-1999 IEC-61076-4-103-1999.pdf(66页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 61076-4-103: 1999 IEC 61076-4-103: 1999 Connectors for use in d.c. low-frequency analogue and digital high speed data applications Part 4-103: Printed board connectors with assessed quality Detail specification for two-part connectors with shielding and a basic grid of 2,5 mm
2、The European Standard EN 61076-4-103:1999 has the status of a British Standard ICS 31.220.10 Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 11 07:08:48 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 61076-4-103:1999 This British Standard, having been prepared under the direction of the Electr
3、otechnical Sector Committee, was published under the authority of the Standards Committee and comes into effect on 15 June 1999 BSI 03-2000 ISBN 0 580 32525 3 National foreword This British Standard is the English language version of EN 61076-4-103:1999. It is identical with IEC 61076-4-103:1999. Th
4、e UK participation in its preparation was entrusted by Technical Committee EPL/48, Electromechanical components for electronic equipment, to Subcommittee EPL/48/2, Connectors for electronic equipment, which has the responsibility to: aid enquirers to understand the text; present to the responsible i
5、nternational/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this subcommittee can be obtained on request
6、 to its secretary. From 1 January 1997, all IEC publications have the number 60000 added to the old number. For instance, IEC 27-1 has been renumbered as IEC 60027-1. For a period of time during the change over from one numbering system to the other, publications may contain identifiers from both sy
7、stems. Cross-references Attention is drawn to the fact that CEN and CENELEC Standards normally include an annex which lists normative references to international publications with their corresponding European publications. The British Standards which implement these international or European publica
8、tions may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of
9、British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, the EN title page, pages 2 to 60 and a back co
10、ver. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover. Amendments issued since publication Amd. No.DateComments Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 11 07:08:48 GMT+00:
11、00 2006, Uncontrolled Copy, (c) BSI BS EN 61076-4-103:1999 BSI 03-2000i Contents Page National forewordInside front cover Foreword2 Text of EN 61076-4-1037 Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 11 07:08:48 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ii blank Licensed Copy: sheffieldun s
12、heffieldun, na, Sat Nov 11 07:08:48 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 61076-4-103 April 1999 ICS 31.220.10 English version Connectors for use in d.c. low-frequency analogue and digital high speed data applications Part 4-103: Printed boar
13、d connectors with assessed quality Detail specification for two-part connectors with shielding and a basic grid of 2,5 mm (IEC 61076-4-103:1999) Connecteurs pour applications analogiques en courant continu et basse frquence et pour applications numriques utilisant des dbits levs pour le transfert de
14、s donnes Partie 4-103: Connecteurs pour cartes imprimes sous assurance de la qualit Spcification particulire pour connecteurs en deux parties avec blindage au pas de base de 2,5 mm (CEI 61076-4-103:1999) Steckverbindungen fr Gleichspannungs- und Niederfrequenzanwendungen sowie digitale Anwendungen m
15、it hoher bertragungsrate Teil 4-103: Steckverbinder fr gedruckte Schaltungen mit bewerteter Qualitt Bauartspezifikation fr geschirmte indirekte Steckverbinder, Raster 2,5 mm (IEC 61076-4-103:1999) This European Standard was approved by CENELEC on 1999-04-01. CENELEC members are bound to comply with
16、the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat
17、 or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the off
18、icial versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CENELEC European Committee f
19、or Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B-1050 Brussels 1999 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. R
20、ef. No. EN 61076-4-103:1999 E Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 11 07:08:48 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 61076-4-103:1999 BSI 03-2000 2 Foreword The text of document 48B/737/FDIS, future edition 1 of IEC 61076-4-103, prepared by SC 48B, Connectors, of IEC TC 48, El
21、ectromechanical components and mechanical structures for electronic equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 61076-4-103 on 1999-04-01. The following dates were fixed: Annexes designated “normative” are part of the body of the standard. In this stan
22、dard, Annex ZA is normative. Annex ZA has been added by CENELEC. Endorsement notice The text of the International Standard IEC 61076-4-103:1999 was approved by CENELEC as a European Standard without any modification. latest date by which the EN has to be implemented at national level by publication
23、of an identical national standard or by endorsement (dop) 2000-01-01 latest date by which the national standards conflicting with the EN have to be withdrawn(dow) 2002-01-01 Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 11 07:08:48 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 61076-4-103:1999
24、 BSI 03-20003 Contents Page Foreword2 1General data7 1.1Recommended method of mounting7 1.1.1Number of contacts and contact cavities8 1.2Ratings and characteristics8 1.3Normative references10 1.4Marking11 1.5IEC type designation11 1.6Ordering information12 2Technical data13 2.1Definitions13 2.1.1Mec
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS-EN-61076-4-103-1999 IEC-61076-4-103-1999 BS EN 61076 103 1999 IEC
链接地址:https://www.31doc.com/p-3743637.html