BS-EN-61300-2-50-2007.pdf
《BS-EN-61300-2-50-2007.pdf》由会员分享,可在线阅读,更多相关《BS-EN-61300-2-50-2007.pdf(12页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 61300-2-50: 2007 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-50: Tests Fibre optic connector proof test with static load Singlemode and multimode The European Standard EN 61300-2-50:2007 has the status of a British St
2、andard ICS 33.180.20 ? Licensed Copy: London South Bank University, London South Bank University, Sat Sep 01 03:19:42 GMT+00:00 2007, Uncontrolled Copy, (c) BSI BS EN 61300-2-50:2007 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 August 2
3、007 BSI 2007 ISBN 978 0 580 54314 2 National foreword This British Standard is the UK implementation of EN 61300-2-50:2007. It is identical to IEC 61300-2-50:2007. The UK participation in its preparation was entrusted by Technical Committee GEL/86, Fibre optics, to Subcommittee GEL/86/2, Fibre optic
4、 interconnecting devices and passive components. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance w
5、ith a British Standard cannot confer immunity from legal obligations. Amendments issued since publication Amd. No. DateComments Licensed Copy: London South Bank University, London South Bank University, Sat Sep 01 03:19:42 GMT+00:00 2007, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD EN 61300-2-50 NO
6、RME EUROPENNE EUROPISCHE NORM August 2007 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2007 CENELEC - All rights of exploitat
7、ion in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 61300-2-50:2007 E ICS 33.180.20 English version Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-50: Tests - Fibre optic connector proof test with static lo
8、ad - Singlemode and multimode (IEC 61300-2-50:2007) Dispositifs dinterconnexion et composants passifs fibres optiques - Mthodes fondamentales dessais et de mesures - Partie 2-50: Essais - Essai de rsistance des connecteurs fibres optiques sous charge statique - Unimodal et multimodal (CEI 61300-2-50
9、:2007) Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prf- und Messverfahren - Teil 2-50: Prfungen - Festigkeitsprfung fr Lichtwellenleiter-Steckverbinder - Einmoden und Mehrmoden (IEC 61300-2-50:2007) This European Standard was approved by CENELEC on 2007-07-01. CENELEC
10、 members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on appl
11、ication to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretar
12、iat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Ne
13、therlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Licensed Copy: London South Bank University, London South Bank University, Sat Sep 01 03:19:42 GMT+00:00 2007, Uncontrolled Copy, (c) BSI Foreword The text of document 86B/2509/FDIS,
14、future edition 1 of IEC 61300-2-50, prepared by SC 86B, Fibre optic interconnecting devices and passive components, of IEC TC 86, Fibre optics, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 61300-2-50 on 2007-07-01. The following dates were fixed: latest date by wh
15、ich the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2008-04-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2010-07-01 Annex ZA has been added by CENELEC. _ Notice This document
16、contains material that is Copyright 2006, Telcordia Technologies, Inc. (“Telcordia“). All rights reserved. The reader is advised that this IEC document and Telcordia source(s) may differ, and the context and use of said material in this IEC document may differ from that of Telcordia. Telcordia makes
17、 no representation or warranty, express or implied, with respect to the sufficiency, accuracy, or utility of any information or opinion contained herein. Any use of or reliance upon said information or opinion is at the risk of the user. Telcordia shall not be liable for any damage or injury incurre
18、d by any person arising out of the sufficiency, accuracy, or utility of any information or opinion contained herein. _ Endorsement notice The text of the International Standard IEC 61300-2-50:2007 was approved by CENELEC as a European Standard without any modification. _ EN 61300-2-50:2007 2 License
19、d Copy: London South Bank University, London South Bank University, Sat Sep 01 03:19:42 GMT+00:00 2007, Uncontrolled Copy, (c) BSI 3 EN 61300-2-50:2007 CONTENTS 1 Scope 4 2 Normative references .4 3 General description 4 4 Apparatus 4 5 Procedure 5 5.1 General.5 5.2 Preparation of specimen6 5.3 Prec
20、onditioning .6 5.4 Initial measurements .6 5.5 Test method 6 5.6 Recovery.6 5.7 Final measurements 6 6 Details to be specified 7 Annex ZA (normative) Normative references to international publications with their corresponding European publications .8 Figure 1 Proof test apparatus.5 Figure 2 Applicat
21、ion of the load in the case of duplex cordage5 Licensed Copy: London South Bank University, London South Bank University, Sat Sep 01 03:19:42 GMT+00:00 2007, Uncontrolled Copy, (c) BSI EN 61300-2-50:2007 4 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS BASIC TEST AND MEASUREMENT PROCEDUR
22、ES Part 2-50: Tests Fibre optic connector proof test with static load Singlemode and multimode 1 Scope This part of IEC 61300 describes a test to quantitatively assess the capability of connector terminated patchcord cable assemblies to withstand static loads without uncoupling of the connector, phy
23、sical damage to the assembly or permanent degradation of optical performance. This test is intended to apply to terminated reinforced jacketed cable of any diameter, both singlemode and multimode. 2 Normative references The following referenced documents are indispensable for the application of this
24、 document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 61300-1, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 1: General and
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 61300 50 2007
链接地址:https://www.31doc.com/p-3743749.html