BS-EN-61355-1997 IEC-61355-1997.pdf
《BS-EN-61355-1997 IEC-61355-1997.pdf》由会员分享,可在线阅读,更多相关《BS-EN-61355-1997 IEC-61355-1997.pdf(54页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 61355:1997 IEC 61355: 1997 Classification and designation of documents for plants, systems and equipment The European Standard EN 61355:1997 has the status of a British Standard ICS 01.080.30; 29.020 Licensed Copy: London South Bank University, London South Bank University, Th
2、u Mar 01 06:27:57 GMT+00:00 2007, Uncontrolled Copy, (c) BSI BS EN 61355:1997 This British Standard, having been prepared under the direction of the Electrotechnical Sector Board, was published under the authority of the Standards Board and comes into effect on 15 September 1997 BSI 09-1999 ISBN 0 5
3、80 27712 7 National foreword This British Standard is the English language version of EN 61355:1997. It is identical with IEC 61355:1997. The UK participation in its preparation was entrusted to Technical Committee GEL/3, Documentation and graphical symbols, which has the responsibility to: aid enqu
4、irers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations r
5、epresented on this committee can be obtained on request to its secretary. From 1 January 1997, all IEC publications have the number 60000 added to the old number. For instance, IEC 27-1 has been renumbered as IEC 60027-1. For a period of time during the change over from one numbering system to the o
6、ther, publications may contain identifiers from both systems. Cross-references Attention is drawn to the fact that CEN and CENELEC Standards normally include an annex which lists normative references to international publications with their corresponding European publications. The British Standards
7、which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard doe
8、s not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an insi
9、de front cover, pages i and ii, the EN title page, pages 2 to 48 and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover. Amendments issued since publication Amd. No.DateCo
10、mments Licensed Copy: London South Bank University, London South Bank University, Thu Mar 01 06:27:57 GMT+00:00 2007, Uncontrolled Copy, (c) BSI BS EN 61355:1997 BSI 09-1999i Contents Page National forewordInside front cover Foreword2 Text of EN 613555 Licensed Copy: London South Bank University, Lo
11、ndon South Bank University, Thu Mar 01 06:27:57 GMT+00:00 2007, Uncontrolled Copy, (c) BSI ii blank Licensed Copy: London South Bank University, London South Bank University, Thu Mar 01 06:27:57 GMT+00:00 2007, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 61355 Apr
12、il 1997 ICS 01.110; 29.020 Descriptors: Classifications, codes, designation, technical documents, information interchange, electrical engineering, information, electrical installation, industrial electrical installations English version Classification and designation of documents for plants, systems
13、 and equipment (IEC 61355:1997) Classification et dsignation des documents pour installations industrielles, systmes et matriels (CEI 61355:1997) Klassifikation und Kennzeichnung von Dokumenten fr Anlagen, Systeme und Einrichtungen (IEC 61355:1997) This European Standard was approved by CENELEC on 1
14、997-03-11. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may b
15、e obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to th
16、e Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United K
17、ingdom. CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B-1050 Brussels 1997 CENELEC All rights of exploitation in any form and by any means reser
18、ved worldwide for CENELEC members. Ref. No. EN 61355:1997 E Licensed Copy: London South Bank University, London South Bank University, Thu Mar 01 06:27:57 GMT+00:00 2007, Uncontrolled Copy, (c) BSI EN 61355:1997 BSI 09-1999 2 Foreword The text of document 3B/181/FDIS, future edition 1 of IEC 61355,
19、prepared by SC 3B, Documentation, of IEC TC 3, Documentation and graphical symbols, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 61355 on 1997-03-11. The following dates were fixed: Annexes designated “normative” are part of the body of the standard. Annexes desig
20、nated “informative” are given for information only. In this standard, Annex A and Annex ZA are normative and Annex B, Annex C, Annex D and Annex E are informative. Annex ZA has been added by CENELEC. Endorsement notice The text of the International Standard IEC 61355:1997 was approved by CENELEC as
21、a European Standard without any modification. In the official version, for Annex E, Bibliography, the following notes have to be added for the standards indicated: Contents Page Foreword2 Introduction5 1Scope5 2Normative references5 3Definitions6 4Classification of document kinds6 4.1General6 4.2Doc
22、ument kind classification code7 4.2.1 Basic principle for classification of document kinds7 4.2.2 Layout of document kind classification code (DCC)8 4.3Assigning document kinds to classes8 4.3.1 Classification method8 4.3.2 Classification of established document kinds9 4.3.3 Classification of non-es
23、tablished document kinds10 4.3.4 Classification of composite document kinds10 5Designation of documents10 6Document sets10 7Application guidelines11 7.1Tools for communication about document interchange11 7.2Application of document designation for identification purposes13 Annex A (normative) Tables
24、 for code letters15 Annex B (informative) Established document kinds with short descriptions28 Annex C (informative) Additional information about document kinds for communication purposes45 Annex D (informative) Document interchange lists46 Annex E (informative) Bibliography47 Annex ZA (normative) N
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS-EN-61355-1997 IEC-61355-1997 BS EN 61355 1997 IEC
链接地址:https://www.31doc.com/p-3743824.html