BS-EN-60094-2-1996 BS-6288-2-1995 IEC-60094-2-1994.pdf
《BS-EN-60094-2-1996 BS-6288-2-1995 IEC-60094-2-1994.pdf》由会员分享,可在线阅读,更多相关《BS-EN-60094-2-1996 BS-6288-2-1995 IEC-60094-2-1994.pdf(12页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 60094-2:1996 BS 6288-2: 1995 IEC 94-2:1994 (Including corrigendum, March 1995, to IEC 94-2:1994) Magnetic tape sound recording and reproducing systems Part 2: Calibration tapes The European Standard EN 60094-2:1995 has the status of a British Standard ICS 33.160.30 Licensed Co
2、py: sheffieldun sheffieldun, na, Sat Nov 11 09:27:16 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 60094-2:1996 This British Standard, having been prepared under the direction of the Electrotechnical Sector Board, was published under the authority of the Standards Board and comes into effect on 1
3、5 January 1996 BSI 11-1999 The following BSI references relate to the work on this standard: Committee reference EPL/60 Draft for comment 90/22224 DC ISBN 0 580 24955 7 Committees responsible for this British Standard The preparation of this British Standard was entrusted to Technical Committee EPL/
4、60, Recording, upon which the following bodies were represented: Association of Professional Recording Services Ltd. Audio Engineering Society British Broadcasting Corporation British Kinematograph, Sound and Television Society British Tape Industry Association Federation of the Electronics Industry
5、 ITV Association (ITVA) National Council for Educational Technology (NCET) Royal Photographic Society Royal Television Society Amendments issued since publication Amd. No.DateComments Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 11 09:27:16 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 600
6、94-2:1996 BSI 11-1999i Contents Page Committees responsibleInside front cover National forewordii Foreword2 1Scope3 2Object3 3General requirements3 4Tapes for use at speeds of 38.1 cm/s (15 in/s) and 19.05 cm/s (7 1/2 in/s)3 5Tapes for use at a speed of 9.53 cm/s (3 3/4 in/s)4 6Tapes for use at a sp
7、eed of 4.76 cm/s (1 7/8 in/s)4 Annex A List of suppliers of calibration tapes of width 3.81 mm for use at a speed of 4.76 cm/s5 List of referencesInside back cover Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 11 09:27:16 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 60094-2:1996 ii BSI 11-
8、1999 National foreword This British Standard has been prepared by Technical Committee EPL/60 and is the English language version of EN 60094-2:1995 Magnetic tape sound recording and reproducing systems Part 2: Calibration tapes, published by the European Committee for Electrotechnical Standardizatio
9、n (CENELEC). It is identical with IEC 94-2:1994 and its corrigendum (March 1995), published by the International Electrotechnical Commission (IEC). The cross-reference of this standard as Part 2 of the BS 6288 series has been retained to facilitate reference to other parts of the series. This Britis
10、h Standard supersedes BS EN 60094-2:1994 (BS 6288-2:1994), which is withdrawn. This edition does not reflect a full review or revision of the standard, which will be undertaken in due course. BS 6288 consists of the following Parts: A British Standard does not purport to include all the necessary pr
11、ovisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Part 1 (BS EN 60094-1)Specification for general conditions and requirements Part 2 (BS EN 60094-2)Specificat
12、ion for calibration tapes Part 3Methods of measuring the characteristics of recording and reproducing equipment for sound on magnetic tape Part 4 (BS EN 60094-4)Mechanical magnetic tape properties Part 5 (BS EN 60094-5)Specification for electrical magnetic tape properties Part 6Specification for ree
13、l-to-reel systems Part 7 (BS EN 60094-7)Specification for cassettes for commercial tape records and domestic use Part 8Specification for eight-track magnetic tape cartridge for commercial tape records and domestic use Part 9Specification for magnetic tape cartridge for professional use Part 10Specif
14、ication for time and address codes Part 11Guide to an address code for compact cassettes Cross-references Publication referred toCorresponding British Standard IEC 94-1:1981aBS EN 60094 Magnetic tape sound recording and reproducing systems Part 1:1994 Specification for general conditions and require
15、ments ISO/R 266:1963bBS 3593:1963 Recommendation on preferred frequencies for acoustical measurements a IEC 94, first edition, referred to in clauses 3, 4, 5 and 6 has been supserseded by IEC 94-1:1981. b ISO/R 266, referred to in clause 3 has been superseded by ISO 266:1975. Summary of pages This d
16、ocument comprises a front cover, an inside front cover, pages i and ii, the EN title page, pages 2 to 6, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside fr
17、ont cover. Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 11 09:27:16 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 60094-2 January 1995 ICS 33.160.30Supersedes EN 60094-2:1993 Descriptors: Sound system equipment, sound recording and reproductio
18、n, magnetic tape, calibration, adjustment, recording characteristic English version Magnetic tape sound recording and reproducing systems Part 2: Calibration tapes (IEC 94-2:1994) Systmes denregistrement et de lecture du son sur bandes magntiques Partie 2: Bandes magntiques talons (CEI 94-2:1994) Sy
19、steme fr Tonaufzeichnung und -wiedergabe auf Magnetband Teil 2: Bezugsbnder (IEC 94-2:1994) This European Standard was approved by CENELEC on 1994-03-08. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the
20、 status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, Ger
21、man). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Denmark
22、, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnis
23、che Normung Central Secretariat: rue de Stassart 35, B-1050 Brussels 1995 Copyright reserved to CENELEC members Ref. No. EN 60094-2:1995 E Licensed Copy: sheffieldun sheffieldun, na, Sat Nov 11 09:27:16 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 60094-2:1995 BSI 11-1999 2 Foreword The text of doc
24、ument 60A(CO)153, future amendment to IEC 94-2:1975, prepared by SC 60A, Sound recording, of IEC TC 60, Recording, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as amendment A3 to EN 60094-2:1993 on 1994-03-08. The text of this document, together with that of IEC 94-2:19
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS-EN-60094-2-1996 BS-6288-2-1995 IEC-60094-2-1994 BS EN 60094 1996 6288 1995 IEC 1994
链接地址:https://www.31doc.com/p-3743849.html