BS-EN-60317-0-5-1995 IEC-60317-0-5-1992.pdf
《BS-EN-60317-0-5-1995 IEC-60317-0-5-1992.pdf》由会员分享,可在线阅读,更多相关《BS-EN-60317-0-5-1995 IEC-60317-0-5-1992.pdf(24页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 60317-0-5:1995 IEC 60317-0-5: 1992 Incorporating Amendment No. 1 to BS 6811-7.0:1993 (renumbers BS as BS EN 60317-0-5:1995) and Amendments Nos. 1 and 2 to BS EN 60317-0-5:1995 Specifications for particular types of winding wires Part 0: General requirements Section 5: Glass-fi
2、bre braided resin or varnish impregnated, bare or enamelled rectangular copper wire The European Standard EN 60317-0-5:1994, with the incorporation of amendments A1:1998 and A2:2000, has the status of a British Standard ICS 29.060.10 Licensed Copy: sheffieldun sheffieldun, na, Fri Nov 10 06:52:02 GM
3、T+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 60317-0-5:1995 This British Standard, having been prepared under the direction of the Cables and Insulation Standards Policy Committee, was published under the authority of the Standards Board and comes into effect on 15 April 1993 BSI 02-2001 The follo
4、wing BSI references relate to the work on this standard: Committee reference CIL/55 Special announcement in BSI News, March 1993 ISBN 0 580 21706 X Committees responsible for this British Standard The preparation of this British Standard was entrusted by the Cables and Insulation Standards Policy Co
5、mmittee (CIL/-) to Technical Committee CIL/55, upon which the following bodies were represented: Covered Conductors Association Electrical and Electronic Insulation Association (BEAMA Ltd.) Electronic Components Industry Federation Transmission and Distribution Association (BEAMA Ltd.) Amendments is
6、sued since publication Amd. No.DateComments 8595March 1995Renumbered BS 6811-7.0:1993 as BS EN 60317-0-5:1995. Added Annex ZA 10325May 1999 10904February 2001Indicated by a sideline Licensed Copy: sheffieldun sheffieldun, na, Fri Nov 10 06:52:02 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 60317
7、-0-5:1995 BSI 02-2001i Contents Page Committees responsibleInside front cover National forewordii Foreword2 Text of EN 60317-0-55 Licensed Copy: sheffieldun sheffieldun, na, Fri Nov 10 06:52:02 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 60317-0-5:1995 ii BSI 02-2001 National foreword This Brit
8、ish Standard has been prepared by Technical Committee GEL/55 (formerly CIL/55) and is the English language version of EN 60317-0-5:1994 Specifications for particular types of winding wires Part 0: General requirements Section 5: Glass-fibre braided resin or varnish impregnated, bare or enamelled rec
9、tangular copper wire, including amendments A1:1998 and A2:2000, published by the European Committee for Electrotechnical Standardization (CENELEC). It is identical with IEC 60317-0-5:1992, including amendments 1:1997 and 2:1999, published by the International Electrotechnical Commission (IEC). WARNI
10、NG. In referring to the methods of test in BS EN 60851 this Section of BS EN 60317 calls for the use of substances and/or procedures that may be injurious to health if adequate precautions are not taken. It refers to technical suitability and does not absolve the user from legal obligations relating
11、 to health and safety at any stage. The clause numbers used in this Section are not consecutive. The clause numbers are identical with the test numbers used in IEC 851, which is identical with BS EN 60851 (see 3.2). The introduction to IEC 60317-0-5 reads as follows. “This International Standard is
12、one of a series which deals with insulated wires used for windings in electrical equipment. The series has three groups describing: 1) methods of test (IEC 851); 2) specifications (IEC 317); 3) packaging (IEC 264).” NOTEReference should be made to BS 6811-0 General introduction and list of Parts whi
13、ch lists all standards in the BS 6811 series and gives their relationship with IEC publications. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “Internat
14、ional Standards Correspondence Index” or using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British
15、 Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, the EN title page, pages 2 to 19 and a back cover. The BSI copyright notice displayed in this document indicates when the document was l
16、ast issued. Sidelining in this document indicates the most recent changes by amendment. Licensed Copy: sheffieldun sheffieldun, na, Fri Nov 10 06:52:02 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 60317-0-5 August 1994 + A1 January 1998 + A2 Februar
17、y 2000 ICS 29.060.10 Descriptors: Electric conductor, winding, electric wire, insulated wire, enamelled wire, copper, glass-fibre English version Specifications for particular types of winding wires Part 0: General requirements Section 5: Glass-fibre braided resin or varnish impregnated, bare or ena
18、melled rectangular copper wire (includes amendments A1:1998 and A2:2000) (IEC 60317-0-5:1992 + A1:1997 + A2:1999) Spcifications pour types particuliers de fils de bobinage Partie 0: Prescriptions gnrales Section 5: Fil de section rectangulaire en cuivre nu ou maill recouvert dune tresse de fibres de
19、 verre imprgnes de rsine ou de vernis (inclut les amendements A1:1998 et A2:2000) (CEI 60317-0-5:1992 + A1:1997 + A2:1999) Technische Lieferbedingungen fr bestimmte Typen von Wickeldrhten Teil 0: Allgemeine Anforderungen Hauptabschnitt 5: Flachdrhte aus Kupfer, blank order lackisoliert, umsponnen mi
20、t Glasgewebe, imprgniert mit Harz oder Lack (enthlt nderungen A1:1998 und A2:2000) (IEC 60317-0-5:1992 + A1:1997 + A2:1999) This European Standard was approved by CENELEC on 1994-03-08. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for g
21、iving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three officia
22、l versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committ
23、ees of Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europ
24、isches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B-1050 Brussels 1994 Copyright reserved to CENELEC members Ref. No. EN 60317-0-5:1994 + A1:1998 + A2:2000 E Licensed Copy: sheffieldun sheffieldun, na, Fri Nov 10 06:52:02 GMT+00:00 2006, Uncontrolled Copy, (c) BSI
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS-EN-60317-0-5-1995 IEC-60317-0-5-1992 BS EN 60317 1995 IEC 1992
链接地址:https://www.31doc.com/p-3743875.html